Experimental Study of Effect of Medium Boundary on Light Distribution in Tissue Phantoms

An experimental method for investigating the effect of medium boundary on distributions of light in the biological tissue phantom intralipid is presented. Measurements of distributions of light in intralipid-10% suspensions at 633 nm are described, in which a narrow collimated beam is incident on the surface of the phantoms and into the different depths inside of the phantoms. The experimental results show that the effect of the boundary of the medium on the curves geometry of light distributions is trivial, but the effect on intensity of scattering light is obvious, the maximal relative change of the energy fluence reaches 53.8% and the position of the peak of the energy fluence curve has a shift of 1.1 mm in the reverse direction of incident light for the phantom with albedo a=0.998, and the effect of the boundary is decreased with the increase of the absorption coefficients of tissue phantoms. The experimental results were analysed by the diffusion theory. These studies will be helpful for further understandings of the relation between the boundary of biological tissue and the distribution of light in tissue.     

Specific Angular Momentum Distribution of Disc Galaxies Formed in Preheated Intergalactic Media

Assuming that baryons within a galactic halo have the same specific angular momentum as the dark matter where they locate initially and a disc forms due to the gas cooling and condensation with the conservation of angular momentum, we investigate the angular momentum distribution in a resulting galactic disc under the new preheated galaxy formation model suggested by Mo and Mao (Mon. Not. R. Astron. Soc. 333 (2002) 768).Compared with the observational results, it can be concluded that the preheated galaxy formation model can match current observations. This model can be a good approach to solve the problems of both the angular momentum catastrophe and the mismatch of angularomomentum profiles in current disc galaxy formation models.     

介质靶表面的充电效应对等离子体浸没离子注入过程中鞘层特性的影响

针对等离子体浸没离子注入技术在绝缘体表面制备硅薄膜工艺，采用一维脉冲鞘层模型描述介质靶表面的充电效应对鞘层厚度、注入剂量及靶表面电位等物理量的影响.数值模拟结果表明：随着等离子体密度的增高，表面的充电效应将导致鞘层厚度变薄、表面电位下降以及注入剂量增加，而介质的厚度对鞘层特性的影响则相对较小. 关键词： 等离子体浸没离子注入 脉冲鞘层 绝缘介质 充电效应     

记录媒体用薄膜材料及相关靶材的技术和发展

 信息化时代随着计算机技术的普及来到我们面前,其突出表现是信息总量和信息交换的剧增,因此,发展海量存储技术日趋重要。随着信息及计算机技术的不断发展,对其作为主要工具的记录媒体的需求越来越大,要求越来越高。记录媒体中大多数磁盘、磁光盘、光盘是以相关靶材磁控溅射而成的,因此,为满足信息记录媒体的高密度化、小型化和低价格化,需要对其相关靶材的成分、制造工艺、性能和溅射工艺做进一步研究。目前,随着新材料的开发和记录媒体的发展,磁光盘、光盘用靶材市场在不断增长。尤其近几年CD、VCD、DVD市场的迅速扩大,其相关靶材的前景也日益被看好。     

用光来操纵活性生物分子

 现在展示在你面前的照片是一个红血球细胞(图1上)以及它被拉伸而变形的情形(图1下)。这是奥斯汀德克萨斯大学的一个研究组进行的研究细胞弹性的实验。他们用激光作工具,利用光进入细胞时产生的对细胞的作用力使细胞拉长,拉伸程度与激光的强度有关。由于细胞被癌病侵害后其弹性会发生改变,用这个办法能够筛选出有病细胞的数量。德克萨斯大学的这个实验也成功地证明了,如果一束激光照到一个完整的生物细胞上,在光进入细胞时对细胞有一个与进入方向相反的作用力,在光射出细胞时对细胞有一个与射出方向相同的作用力。那么这力是怎样产生的呢?其原理实际上并不很深奥。     

Total Dose Radiation Tolerance of Phase Change Memory Cell with GeSbTe Alloy

Phase change memory （PCM） cell array is fabricated by a standard complementary metal-oxide-semiconductor process and the subsequent special fabrication technique. A chalcogenide Ge2Sb2Te5 film in thickness 50hm deposited by rf magnetron sputtering is used as storage medium for the PCM cell. Large snap-back effect is observed in current-voltage characteristics, indicating the phase transition from an amorphous state （higher resistance state） to the crystalline state （lower resistance state）. The resistance of amorphous state is two orders of magnitude larger than that of the crystalline state from the resistance measurement, and the threshold current needed for phase transition of our fabricated PCM cell array is very low （only several μA）. An x-ray total dose radiation test is carried out on the PCM cell array and the results show that this kind of PCM cell has excellent total dose radiation tolerance with total dose up to 2 ×10^6 rad（Si）, which makes it attractive for space-based applications.     

Transverse Effects in Slow Light Propagation

The effect of finite control beam on the transverse spatial profile of the slow light propagation in an electromagnetically induced transparency medium is studied. From the second-order wave equation and linear response of an EIT medium to the signal field, we find it is possible to produce an effective waveguide for the signal field. The existence and properties of a set of localized, stationary transverse modes are demonstrated. Especially, by carefully manipulating the profile of the control beam, we can realize single-mode propagation for the signal field, which may be important for potential applications.     

介质极化的瞬时相位与振幅

求解电子运动的二阶微分方程，在旋转波近似下，介质在外场突然变化时产生的瞬态感应极化与外场同频，但相位总是落后，最大落后为π/2；振幅大小与初态有关，随时间按指数规律衰减，衰减快慢由介质的阻尼系数决定。     

二维欧拉多介质流体力学数值模拟-TVD＋VOF方法

用TVD格式结合VOF界面处理方法编制了二维多介质高分辨欧拉程序，以解决冲击波和多介质界面处理。程序包括单介质网格高精度流体力学计算、多介质网格内界面重构、各种介质输运和压力驰豫平衡过程。其中单介质网格的计算采用Harten二阶TVD格式结合MacCormark方法计算含有源项的非齐次守恒定律方程组，通过4节点限制函数保证格式单调。多介质网格采用Youngs方法构造界面，采用x，y方向分裂格式计算体积份额输运，再根据体积份额输运计算质量、动量和能量的输运，最后利用等熵条件计算各种介质的压力驰豫平衡过程。     

无介质微波作用下酮与稳定叶立德的反应

酮与稳定膦叶立德在家用微波炉中加热，在无任何溶剂或固体介质条件下，4．5min之内完成反应，得到了良好产率的Wittig反应产物，较之液相苯中回流反应的传统方法，此法具有时间短、操作步骤简单、无毒害等优点，同时使一些在传统方法中与稳定叶立德不反应或难反应的酮得以进行并有较好收率。此外，在得到α，β-不饱和酯的同时，还发现了少量重排产物β，γ-不饱和酯，并对其机理进行了推测与证明。