TDI线扫相机光学通道建模与仿真

卫星相机建模与仿真研究不论在民用还是军事领域都具有重要的理论研究和实际应用价值。根据TDI线扫相机的工作原理建立了一个TDI线扫相机光学通道的数学模型,该模型包括从景物到TDI CCD离散图像的几何投影关系和能量传递关系两部分,对于确定的成像系统,给定景物参数和光学系统参数,就可以确定对应图像传感器上的离散图像。为了验证模型,对一幅卫星图像进行了计算机仿真。建立的模型可以用来研究当成像条件改变时对图像的影响,进一步还可以用来发展虚拟卫星相机系统。     

离心泵快速启动过程外部特性的试验研究

介绍离心泵快速启动试验装置和试验方法,对一台出口直径为80 mm的小型管道离心泵进行试验研究,分别测试了试验泵的稳态性能和各项瞬态性能,比较分析了两者的区别。结果显示,启动过程中,离心泵的扬程紧跟转速到达最大值,转速稳定后的瞬态性能与稳态假设对应,流量和扬程的上升历程与管路阻力特性直接相关,而转速与其基本无关; 在启动初始阶段,无量纲扬程呈现很大值,继而迅速减小到低于稳态假设值,表现出明显的瞬态效应。     

一种新的磁共振图像处理流水线的设计与实现

磁共振图像的重建、后处理及可视化是磁共振成像（MRI）系统的重要组成部分.本文开发了一个新的用于磁共振图像重建、后处理及可视化的开源框架YAP（Yet Another Pipeline），利用此框架可以方便地构建图像处理流水线.与现有的一些其他开源框架相比，本文开发的框架具有如下特点：（1）采用基于接口的设计，可使用基于接口的插件对流水线的功能进行扩展；（2）允许用户使用编写脚本的方式构建图像处理流水线，编辑与修改流水线都很方便；（3）支持带有分支结构的流水线，便于流水线的构建与调试.目前，该框架已经在商用系统中获得了应用.     

Successive approximation-like 4-bit full-optical analog-to-digital converter based on Kerr-like nonlinear photonic crystal ring resonators

Implementing of photonic sampling and quantizing analog-to-digital converters (ADCs) enable us to extract a single binary word from optical signals without need for extra electronic assisting parts. This would enormously increase the sampling and quantizing time as well as decreasing the consumed power. To this end, based on the concept of successive approximation method, a 4-bit full-optical ADC that operates using the intensity-dependent Kerr-like nonlinearity in a two dimensional photonic crystal (2DPhC) platform is proposed. The Silicon (Si) nanocrystal is chosen because of the suitable nonlinear material characteristic. An optical limiter is used for the clamping and quantization of each successive levels that represent the ADC bits. In the proposal, an energy efficient optical ADC circuit is implemented by controlling the system parameters such as ring-to-waveguide coupling coefficients, the ring’s nonlinear refractive index, and the ring’s length. The performance of the ADC structure is verified by the simulation using finite difference time domain (FDTD) method.     

Integration of quantitative DCE-MRI and ADC mapping to monitor treatment response in human breast cancer: initial results

PURPOSE: The objective of this study was to assess changes in the water apparent diffusion coefficient (ADC) and in pharmacokinetic parameters obtained from the fast-exchange regime (FXR) modeling of dynamic contrast-enhanced magnetic resonance imaging (DCE-MRI) during neoadjuvant chemotherapy in breast cancer. MATERIALS AND METHODS: Eleven patients with locally advanced breast cancer underwent MRI examination prior to and after chemotherapy but prior to surgery. A 1.5-T scanner was used to obtain T1, ADC and DCE-MRI data. DCE-MRI data were analyzed by the FXR model returning estimates of K(trans) (volume transfer constant), v(e) (extravascular extracellular volume fraction) and tau(i) (average intracellular water lifetime). Histogram and correlation analyses assessed parameter changes post-treatment. RESULTS: Significant (P < .05) changes or trends towards significance (P < .10) were seen in all parameters except tau(i), although there was qualitative reduction in tau(i) values post-treatment. In particular, there was reduction (P < .035) in voxels with K(trans) values in the range 0.2-0.5 min(-1) and a decrease (P < .05) in voxels with ADC values in the range 0.99 x 10(-3) to 1.35 x 10(-3) mm2/s. ADC and v(e) were negatively correlated (r = -.60, P < .02). Parameters sensitive to water distribution and geometry (T(1), v(e), tau(i) and ADC) correlated with a multivariable linear regression model. CONCLUSION: The analysis presented here is sensitive to longitudinal changes in breast tumor status; K(trans) and ADC are most sensitive to these changes. Relationships between parameters provide information on water distribution and geometry in the tumor environment.     

基于Sagnac光纤干涉仪的管道泄漏检测和定位技术

研制了一种基于Sagnac干涉仪的分布式光纤传感器,可实时进行管道泄漏检测与定位.阐述了该传感技术的工作原理和泄漏点定位方法,并推导了泄漏引起的光信号相位变化表达式。管道泄漏实验结果表明,水压为0.3MPa时,该技术能有效地检测到管道泄漏的发生并准确定位。     

Cavitation onset caused by a dynamic pressure wave in liquid pipelines

When liquids flow in the pipelines, the onset of cavitation can be characterized by a variant of the Euler number known as the cavitation number (CN), which is based on the velocity and denoted by C in this paper. Conventionally, cavitation is considered to be induced when C ~ 1. However, experimental observations and several pipe bursts indicate that the CN may incorrectly predict the onset of cavitation. For example, when leakage occurs in the pipeline or a valve in the pipeline is opened, the resultant pressure loss generates a dynamic pressure wave with a small amplitude, which may lead to bubble formation, even though C ~ 1 is not satisfied. Hence, this paper proposes another CN based on the amplitude of the generated dynamic pressure wave, rather than the velocity, for ascertaining the onset of cavitation. The validity of the proposed CN was verified through experiments and a case study. The results indicated that the proposed CN can be effectively used for cavitation prediction induced by pressure fluctuations and for investigating phenomena such as pressure fluctuation, leakage, and corrosion in liquid pipelines, tanks, and pressure vessels, as well as the safety design of liquefied natural gas tanks and tankers.     

基于氦离子化气相色谱法测定微量氧、氮的影响因素

探讨氦离子化气相色谱法测定样品中微量氧、氮含量的影响因素。采用控制变量法,对色谱柱温度、进样流量、进样管道环境及极化电压等因素对微量氧、氮测定结果的影响进行讨论和分析。结果表明,当色谱柱温度为25~45℃时,色谱柱对氧、氮吸附量最小;当进样流量不小于70 mL/min时,微量氧、氮测定结果受外界干扰最小;当极化电压为80~160 V时,氧、氮具有最佳的响应值;初次测定样品中微量氧、氮含量时,需使进样管道表面吸附的氧、氮处于饱和状态,以便获得理想的测定结果。讨论的结果可为氦离子化气相色谱法测定相关样品中微量氧、氮含量时提供技术参考。     

海洋结构物摩擦学问题的研究进展

海洋结构物主要包括海上钻井平台、油气开采平台、FPSO、海底输油管线及海上大型储油罐等大型海上结构物.海洋结构物总是处于波浪、海流、风暴、海冰等严峻海洋环境中,并受到海生物污损、海洋腐蚀、磨损等多方面因素相互作用的影响,摩擦学问题无处不在.论文针对海洋平台结构、流体处理及运输设备、定位设备及作业设备四方面的摩擦学问题进行论述,主要介绍了海洋平台结构、管道系统及海水泵、锚链及螺旋桨、钻井套管及电潜泵等海工设备的工作特点,概述了国内外关于这类海工设备的摩擦学问题的研究现状,并对海洋结构物的摩擦学研究重点进行了展望.     

跨断层埋地管线-土接触非连续变形分析

跨断层埋地管线系统主要由管线及其周围土体两种不同介质组成,具有分析介质不连续性特性.为实现对管-土接触介质的不连续性分析,采用非连续变形分析与有限元分析相结合的方法,将跨逆断层埋地管线系统从实际工作状态中取出一部分作为分析对象.利用有限元分析方法对管线及其周围土体进行网格划分;而管-土之间的相互作用,利用非连续变形分析中的不连续介质接触处理方法实现模拟.通过模型的数值分析,研究了逆断层作用下管-土之间的非连续变形相互作用状态,验证了利用非连续变形分析与有限元方法相结合解决埋地管线-土接触的可行性和有效性,为管-土相互作用分析提供了新的研究思路和研究方法.