活性污泥法处理城市污水中鼓风和纯氧两种曝气方法的比较

对活性污泥法处理城市污水中鼓风曝气和纯氧（或富氧）曝气这两种方法，从曝气设备结构、特点、工艺技术指标、运行管理及经济性等方面进行了分析和比较。     

造纸污泥与废水污泥流化床焚烧时NO_x和SO_2的排放特性研究

1前言流化床焚烧污犯是近年来发达国家广泛采用的方法，它能很好地实现污泥的稳定化、无害化、减容化和资源化处理。燃煤流化床锅炉污染物排放方面已做了大量的研究工作，由于污泥与煤在结构和性质方面的差异较大，因此有必要对流化床焚烧污泥时污染物排放特性进行研究。本文详细研究了造纸、废水污泥在流化床中焚烧时污泥水份、运行床温及过量空气对NO。和SO。的排放特性及污泥N－＋NO。、S－SO。的转化率的影响，并对这两种性质差异较大的污泥焚烧时的NO。和502的生成特性进行了对比分析，取得了许多有价值的结果，为污泥流化床焚烧…     

Uncoupled metabolism stimulated by chemical uncoupler and oxic-settling-anaerobic combined process to reduce excess sludge production

The effects of three uncoupled metabolic systems (conventional activated sludge process with the addition of 3,3′,4′,5-tetrachlorosalicylanilide [TCS], oxic-settling-anaerobic [OSA] process modified by insertion of a sludge-holding tank in the sludge return line, and TCS and OSA combined process) on reducing excess sludge production were studied. Compared with the control conventional activated sludge process, the most effective system was the combined process, which could reduce excess sludge production by 46.90%. The 180-d operation results confirmed that TCS is an effective chemical uncoupler in reducing the sludge yield but that it had an adverse effect on substrate removal capability, effluent nitrogen concentration, and sludge settleability. The OSA process decreased excess sludge production by only 26% but had less adverse effect on effluent quality and could improve sludge settleability. The effluent total phosphorous concentration of the three systems was slightly lower than of the control unit. Microbial populations were monitored by both microscopic and molecular biologic analysis method (polymerase chain reaction [PCR]-denaturing gradient gel electrophoresis [DGGE]). The presence of TCS caused metazoans to disappear and decreased the number and activity of protozoa. PCR amplification of 16S rRNA and sequent DGGE analysis found a shift in the diversity of the predominant species. The results imply that OSA combined with the chemical uncoupler process may effectively reduce excess sludge yield and not affect process performance significantly.     

Non-isothermal thermogravimetric pyrolysis kinetics of waste petroleum refinery sludge by isoconversional approach

Pyrolysis of petroleum refinery sludge has received global acclamation as a clean conversion technique for providing solution of sludge disposal as well as efficient resource utilization. This communication reports the kinetics study of pyrolysis of petroleum refinery sludge. Experiments were carried out by means of thermogravimetric analysis at different heating rates of 5, 10 and 20°C min⁻¹. The pyrolytic reaction is significant in the temperature range of 200–350°C and analysis and evaluation of kinetic parameters is done in the 100–500°C region of non-isothermal TG curves obtained in nitrogen atmosphere. The activation energy is calculated by iso-conversional method, then other kinetic parameters are determined by considering single reaction and two reaction global kinetic model. Two-reaction model is found to fit satisfactorily the experimental results.     

Microbial synthesis and characterization of physiochemical properties of polyhydroxyalkanoates (PHAs) produced by bacteria isolated from activated sludge obtained from the municipal wastewater works in Hong Kong

The first objective of this study was the measurement of physical properties of P(3HB-co-3HV) copolymers with different (hydroxybutyrate) HB to (hydroxyvalerate) HV ratios produced by Bacillus cereus (TRY2) isolated from activated sludge. The 3HV PHBV copolymers were 0.05, 22.6, 39.2, 54.1, and 69.1 mol%, respectively. The second objective was to study possible wastewater treatment and production of PHAs at the same time by B. cereus (TRY2) and Pseudomonas spp. (TOB17) (both were isolated from activated sludge), recombinant Bacillus DH5α, and a combination of the above three bacteria. The results were satisfactory; the maximum COD and TOC of the sewage sludge reduced were 53.5% and 67.5%, respectively.     

Development and validation of methods for the trace determination of phthalates in sludge and vegetables

A routine method which is simple, quick and precise has been set up and validated for phthalate analysis in environmental samples (tomato plants and sewage sludges). Six phthalates have been studied simultaneously: dimethylphthalate, diethylphthalate, di-n-butylphthalate, n-butylbenzylphthalate, di-2-ethyl-hexyl phthalate (DEHP) and di-n-octylphthalate. Optimization of sample, solvent extraction uses a Soxtec apparatus and extract purification with an a solid-phase extraction cartridge allows between 90 and 110% recovery of phthalates. Precise, sensitive and selective identification and quantifying of analytes is by GC-MS in the single ion monitoring mode. This protocol allows analytes with concentrations as low as 10 microg/kg dry matter (DM) to be determined from small (1-2 g DM) samples. This analytical method has been applied to the phthalate transfer study for agricultural recycling of sludges, where phthalate bioavailability has been studied in aquiculture using two types of experiments. Tomatoes have been grown in containers where the trace organics have been directly introduced as pure substances, and in a second experiment under the same growth conditions, sewage sludge has replaced the pure substances. Transfer of these trace organics has been followed into the various parts of the tomato plant and in general only the DEHP is worthy of note although its percentage transfer remains very low even in an experiment designed to maximize this.     

Influence of Pore-expansion Agent on the Structure and Performance of Activated Alumina Synthesized from Waste Aluminum Sludge

1 INTRODUCTION The reactivity of activated alumina adsorbent is closely related to its specific surface area: the larger the specific surface area, the better its activity and adsorbent capability are. However, in reality, the prac- tically available specific surface area or effective spe- cific area has relationship with its pore structure[1]. Since many reactant molecules are difficult to enter the pores to react with whose radius is shorter than certain critical value, the increase of p…     

Electron beam pretreatment of sewage sludge before anaerobic digestion

The pretreatment of waste-activated sludge (WAS) by electron beam irradiation was studied in order to improve anaerobic sludge digestion. The irradiation dose of the electron beam was varied from 0.5 to 10 kGy. Batch and continuous-flow stirred tank reactors (CFSTRs) were operated to evaluate the effect of the electron beam pretreatment on anaerobic sludge digestion. Approximately 30–52% of the total chemical oxygen demand (COD) content of the WAS was solubilized within 24 h after electron beam irradiation. A large quantity of soluble COD, protein, and carbohydrates leached out from cell ruptures caused by the electron beam irradiation. Volatile fatty acids production from the irradiated sludge was approx 90% higher than that of the unirradiated sludge. The degradation of irradiated sewage sludge was described by two distinct first-order decay rates (k ₁ and k ₂). Most initial decay reaction accelerated within 10 d, with an average k ₁ of 0.06/d for sewage sludge irradiated at all dosages. The mean values for the long-term batch first-order decay coefficient (k ₂) were 0.025/d for irradiated sewage sludge and 0.007/d for unirradiated sludge. Volatile solids removal efficiency of the control reactor fed with unirradiated sewage sludge at a hydraulic retention time (HRT) of 20 d was almost the same as that of the CFSTRs fed with irradiated sludge at an HRT of 10 d. Therefore, disintegration of sewage sludge cells using electron beam pretreatment could reduce the reactor solid retention time by half.     

Application of the Hall™ electrolytic conductivity detector for the analysis of chloroanilines and chloronitroanilines in POTW sludges

Simultaneous detection with a 700-A Hall? and an NPD detector is an effective technique for characterizing chloro-and chloronitroanilines in highly complex Publicly Owned Water Treatment Works (POTW) sludges. The utilization of a modified Varian effluent splitter and a SE-54 fused silica capillary column permitted the detection of mid-picogram quantities of the polar chloroanilines without sacrificing peak shape. The response of the Hall? detector in the halogen mode was roughly proportional to the number of chlorine atoms present, while the response of the Hall? in the nitrogen mode and the NPD was less predictably influenced by the presence of one or more nitro groups. When combined with retention time data, the ratio of the NPD response to the Hall? response has been found to substantiate the presence of chloro- and chloronitroanilines in sludge extracts.