Heterogeneous photobleaching in confocal microscopy

Photobleaching was studied during recording of confocal scanning laser microscopy. Studies on fluorescent gels of FITC-labeled dextran were used to evaluate differential bleaching along thez-axis. Differential bleaching along the z-axis was observed and it was seen that this was related to the numerical aperture of the objective in use. This points to the conclusion that photon energy flux density is an important parameter in photobleaching. To check if photon energy flux density heterogeneity is affected by local variation in the refractive index of the sample, photobleaching rates were calculated for different fluorescent objects (sections of seeds, animal cells stained with nuclear stains, immunocytochemistry preparations) and a pronounced similarity was found between photobleaching rates and DIC images.     

Phase Conjugation in Saturable Absorbing Dye Films by Degenerate Four-Wave Mixing and Holographic Processes Using Nanosecond Pulse and CW Lasers

We report on the simultaneous generation of phase-conjugate signals by degenerate four-wave mixing (DFWM) and holographic processes using a nanosecond pulse and a CW lasers in polyvinyl alcohol (PVA) films doped with four kinds of saturable absorbing dyes. For the pulse laser, of the four kinds of dye-doped PVA films, the erythrosine B-doped PVA and uranine doped-PVA films generate PC signals only by the DFWM process, while the other dye-doped PVA films generate PC signals simultaneously by not only the DFWM process but also the holographic process. Especially, the safranin T-doped PVA film generates strong PC signals by the holographic process. In contrast, all of the dye-doped PVA films generate the two types of PC signals for the CW laser. The fading of dye molecules is found to result in the generation of the holographic component of PC signals which governs the temporal behavior of the total PC signals.     

Almost automorphic solutions for abstract functional differential equations

For abstract linear functional differential equations with an almost automorphic forcing term, we establish a result on the existence of almost automorphic solutions, which extends the classical theorem due to Massera on the existence of periodic solutions for linear periodic ordinary differential equations.     

一种新型频域均衡器在水声通信中的应用

在传统频域均衡器的基础上,结合多载波频移键控调制方式的频谱结构,利用接收信号和参考信号的相关性及均衡器的滤波系数,提出了一种兼具均衡与解调功能的新型频域均衡器结构.该均衡器简单、有效地克服了水声信道中多径传播产生的码间干扰和频率选择性衰落等问题,简化了水声通信系统接收机的复杂度. 新型频域均衡器的解调原理以非相关解调算法为基础,但由于利用了均衡器的计算结果,其差错性能优于传统的非相关解调算法,计算机仿真试验表明,改进后的方法使差错性能提高了2 dB;实际水声通信实验表明,该均衡器能够有效地提高水声通信系统的可靠性,具有很好的应用前景.     

目视催化褪色计时法测定超痕量钒的研究

本文基于在酸性介质中钒(V)催化溴酸钾氧化酸性铬蓝K褪色的新指示反应,建立了一个催化褪色计时法测定超痕量钒的新方法。在体系中引入活化剂抗坏血酸,灵敏度达2×10~(-12)ng/ml,测定范围在0.0l～3.0ng/ml,同时探讨了反应机理。确立了反应速率方程,方法简便经济,已用于天然水中痕量钒的测定。     

探究苯与酸性高锰酸钾溶液的褪色反应

人教版高中教材《化学2》明确指出苯不能使酸性高锰酸钾溶液褪色。但在实验中多次发现苯与酸性高锰酸钾溶液混合后放置一段时间能够褪色。为探讨这一问题，设计了以光照或黑暗、加酸或不加酸为条件，利用紫外-可见分光光度计对放置不同时间后的混合液体进行测试，并对反应后生成的沉淀物进行XRD表征的实验方案。通过对实验数据的综合分析提出了苯与酸性高锰酸钾溶液褪色反应的可能反应机理。     

Revealing the Reaction and Fading Mechanism of FeSe2 Cathodes for Rechargeable Magnesium Batteries

Rechargeable Mg batteries (RMBs) are advantageous large-scale energy-storage devices because of the high abundance and high safety, but exploring high-performance cathodes remains the largest difficulty for their development. Compared with oxides and sulfides, selenides show better Mg-storage performance because the weaker interaction with the Mg²⁺ cation favors fast kinetics. Herein, nanorod-like FeSe₂ was synthesized and investigated as a cathode for RMBs. Compared with microspheres and microparticles, nanorods exhibit higher capacity and better rate capability with a smaller particle size. The FeSe₂ nanorods show a high capacity of 191 mAh g⁻¹ at 50 mA g⁻¹ and a good rate performance of 39 mAh g⁻¹ at 1000 mA g⁻¹. Ex situ characterizations demonstrate the Mg²⁺ intercalation mechanism for FeSe₂, and a slight conversion reaction occurs on the surface of the particles. The capacity fading is mainly because of the dissolution of Fe²⁺, which is caused by the reaction between Fe²⁺ and Cl⁻ of the electrolyte during the charge process on the surface of the particles. The surface of FeSe₂ is mainly selenium after long cycling, which may also dissolve in the electrolyte during cycling. The present work develops a new type of Mg²⁺ intercalation cathode for RMBs. More importantly, the fading mechanism revealed herein has considered the specificity of Mg battery electrolyte and would assist a better understanding of selenide cathodes for RMBs.     

品红褪色机理的实验探究

中学阶段常用于检验二氧化硫气体的品红溶液分为酸性品红和碱性品红2种。通过设计集演示、对比于一体的绿色环保二氧化硫性质实验装置,优化实验条件,探讨了酸性品红和碱性品红与SO2、酸碱反应的性质差异及褪色机理,并提出鉴别酸性品红和碱性品红的简便办法。     

核电结构土-结相互作用分析分区混合计算方法

土-结构相互作用分析是核电结构进行抗震设计和安全评估的重要环节.在核电结构的土-结相互作用分析中,阻尼和非线性是影响结构反应的重要因素. 若采用频域分析,可以方便考虑阻尼,但需通过等效线性化来考虑非线性,不适合于强震作用下的土体非线性.若采用时域分析的逐步积分方法,适合于考虑非线性,但材料阻尼一般采用瑞利阻尼模型,除了紧靠指定阻尼比的少数几个振型外,其他振型的反应将受到瑞利阻尼模型所确定的大阻尼所抑制,造成地震反应与真实情形有较大差异.若采用时域分析的模态叠加法,可合理计入阻尼效应,但模态叠加法不能考虑非线性.因此,如何合理考虑阻尼和非线性是核电结构土-结相互作用分析需要关注的问题.基于此,本文提出一种模态叠加和时步积分结合的土-结相互作用分区算法.其中,出于安全性考虑,地震作用下核电主体结构一般不允许进入非线性,因此结构可采用模态叠加方法,以便合理考虑结构阻尼;土体和基础采用显式时步积分法,可考虑土体非线性;通过人工边界条件考虑无限域的影响 (辐射阻尼).通过简单算例对该方法进行了验证,并用于CAP1400核电结构的土-结相互作用分析中,对比分析了采用模态阻尼和瑞利阻尼时核电结构和场地反应的差异,结果表明结构阻尼模型对场地的反应影响不大,但对结构反应影响明显,在实际工程中应合理选取阻尼模型.      

Li3V2（PO4）3/C正极材料在不同电压区间的电化学行为及容量衰减原因

采用溶胶-凝胶法制备锂离子电池正极材料Li3V2(PO4)3/C.通过恒电流充放电测试、循环伏安(CV)、电化学阻抗谱(EIS)等方法,研究了Li3V2(PO4)3/C在不同电压区间的电化学行为(3.0-4.5 V和3.0-4.8 V).结果表明,3.0-4.8 V电压区间的循环性能和倍率性能均不及3.0-4.5 V电压区间的.3.0-4.5 V区间0.1C (1C=150 mA?g-1)倍率首次放电比容量为127.0 mAh?g-1,循环50次后容量保持率为99.5%,而3.0-4.8 V区间的分别为168.2 mAh?g-1和78.5%.经过高倍率测试后再回到0.1C倍率充放电,3.0-4.5 V和3.0-4.8 V的放电比容量分别为初始0.1C倍率的99.0%和80.7%.经过3.0-4.8 V电压区间测试后,少部分第三个锂离子能够在低于4.5 V的电压脱出,使3.0-4.5 V电压区间的放电比容量提升了7.4%. CV结果表明3.0-4.8 V区间的容量损失主要表现为第一个锂离子的不可逆损失.极片的X射线衍射(XRD)和X射线光电子能谱(XPS)分析测试结果表明经过3.0-4.8 V测试后, Li3V2(PO4)3的结构发生了轻微的改变.电感耦合等离子体(ICP)测试结果表明循环后的电解液中含有少量的V.结构变形和V溶解可能是Li3V2(PO4)3在3.0-4.8 V区间容量衰减的主要原因.