Salinity Controlled Vesicle Formation and Growth in Aqueous Mixture of Aerosol OT/Triton X‐100

Mixed vesicles can be formed spontaneously from aqueous mixture of the double‐tailed anionic surfactant sodium bis(2‐ethylhexyl) sulfosuccinate (AOT) and the nonionic surfactant octylphenoxypolyethoxyethanol (Triton X‐100) under the inducement of salt, the formation mechanism of which should be attributed to the compression of salt on the electric bilayers of the head groups. The stability and the polydispersity of the vesicles are superior to single‐component AOT vesicles, which can be proved by the TEM image and visual observation. The vesicle region was presented in a pseudo‐ternary diagram of AOT/TX‐100/brine. The size of the vesicle was measured using dynamic light scattering. It is found that the vesicle size increases with the salinity but decreases with the content of TX‐100 in the mixture at the same salinity. Especially, the vesicle size is independent of the surfactant concentration at fixed salinity.     

Synthetic studies of the HIV-1 protease inhibitive didemnaketals: precise and stereocontrolled synthesis of the key mother spiroketal

The precise and stereocontrolled synthesis of the C₉-C₂₃ portion, the key mother spiroketal of the HIV-1 protease inhibitive didemnaketals from the ascidian Didemnum sp., has been carried out through multisteps starting from (R)-pulegone as the chiral template. This approach involved the distereoselective construction of eight chiral centers by intramolecular chiral inducement and the coupling of two fragments by Julia reaction.     

非对称笼间电子迁移异构体与电场诱导电子迁移

基于密度泛函理论研究了非对称双笼型单分子溶剂化电子e^-@C₂₄F₂₂(NH)₂C₂₀F₁₈(1、2 和3), 进一步展示了我们提出的一种新型电子异构体——(非对称型的)笼间电子迁移异构体. 1、2 和3 具有显著不同的偶极矩. 由于都存在两个氧化还原中心, 它们属于一种非金属型的新型Robin-Day II-III 分子. 对于1 和3, 额外电子分别定域在C₂₄F₂₂和C₂₀F₁₈笼里(Robin-Day II); 对于2, 额外电子则离域于两个非对称的笼中(Robin-Day III). 值得注意的是, 在y 轴方向上外加-0.0004和-0.0008 a.u.的临界电场(E_c)时可分别使1 的额外电子从C₂₄F₂₂笼中部分和全部地迁移到C₂₀F₁₈笼中, 即实现从1 到2 再到3 的转化; 当E_c为0.0004 a.u.时, 3 的额外电子从C₂₀F₁₈笼中全部迁移到了C₂₄F₂₂笼中, 即3 未经过2 直接转化成了1.     

环糊精诱导胶束形成的TICT荧光探针法研究

环糊精与表面活性剂的相互作用研究已有诸多报导，但主要涉及环糊精与表面活性剂的包络物的稳定常数和其中主客体的化学剂量比［１，２］，至于环糊精对表面活性剂胶束化性质的影响则少见涉猎，这或许与研究方法有关，分子内扭转电荷转移激发态涉及到一个完整的电荷转移，具有很高的极性，其荧光特性显示出显著的介质性质敏感性［３］，因此将ＴＩＣＴ荧光探针法用于环糊精－表面活性剂相互作用研究可能会提供一些新的信息，本文的结     

低真空下紫外激光烧蚀铜诱导发光的机理

采用时间与空间分辨的光谱测量技术,测量了在低真空下XeCl紫外激光烧蚀金属Cu诱导产生等离子体发光羽的发射光谱随时间和空间的强度分布,利用快速同步照相的方法获得了发光羽的相片,结果发现发光羽的不同区域有不同的颜色特征。根据实验结果建立了非常可能的激光烧蚀诱导发光的理论模型,认为不同区域的主要发光机理不同,连续辐射背景光来自近靶处高能电子的运动而产生的轫致辐射;原子线的产生来自电子碰撞传能以及电子与离子的复合激发;离子线的产生来自电子与离子碰撞传能激发。此模型不仅能解释单一激发模型所能解释的实验现象,而且还能够很好地解释单一模型所不能解释的实验现象,低真空下紫外激光烧蚀铜诱导发光的机理与常压下相似,在此实验条件下可以更准确地揭示诱导发光的机理。     

诱导磁场对Bi-Mn合金微观结构与磁性的影响

用x射线衍射和低温磁测量方法，系统研究了在外加诱导磁场下制备的Bi Mn合金的微观结构和磁性.结果表明，在外加诱导磁场下制备的Bi Mn wt6%合金呈现典型的双相结构和各向异性特征，MnBi相c轴沿外加诱导磁场方向取向排列.随外加诱导磁场的增大，剩余磁化强度Mr逐渐增大，这说明MnBi相的取向程度越来越好.发现MnBi相的自旋重取向温度TSR随外加诱导磁场的增大逐渐向高温区移动.对外加诱导磁场影响Bi Mn wt6%合金的微观结构和磁性以及该类材料磁各向异性能的物理机理进行了分析和讨论. 关键词： 磁场诱导 Bi Mn合金 MnBi相 定向排列     

盐引发阴离子/非离子表面活性剂复配体系中囊泡自发形成

在无盐时, 阴离子表面活性剂十二烷基苯磺酸钠(SDBS)与非离子表面活性剂壬基酚聚氧乙烯(10)醚(TX-100)的复配体系中只有混合胶束存在, 而盐的加入即可以引发体系中囊泡的自发形成, 这使得囊泡的形成变得更加简单. 引发机理可以归因于盐对离子表面活性剂的极性头双电层的压缩作用, 减少了极性头的面积, 加上非离子表面活性剂的参与使得堆积参数P增加, 导致了半径更大的聚集体的形成. 制作了SDBS/TX-100/盐水拟三元相图, 通过目测和表面张力的变化确定了囊泡形成的带状区域, 并用负染色电镜(TEM)对囊泡进行了表征, 同时测定了盐度以及相同盐度下表面活性剂浓度对囊泡粒径的影响, 发现囊泡的粒径随着盐度的增加而增加, 而在同一盐度下, 囊泡的粒径基本不受表面活性剂浓度的影响.     

Complex aggregates of silica microspheres by the use of a polymer template

Evaporation of a droplet of silica microsphere suspension on a polystyrene and poly(methyl methacrylate) blend film with isolated holes in its surface has been exploited as a means of particles self-assembly. During the retraction of the contact line of the droplet, spontaneous dewetting combined with the strong capillary force pack the silica microspheres into the holes in the polymer surface. Complex aggregates of colloids are formed after being exposed to acetone vapor. The morphology evolution of the underlying polymer film by exposure to acetone solvent vapor is responsible for the complex aggregates of colloids formation.     

Preparation of a nanowire-structured polyaniline composite and gas sensitivity studies

To obtain organic nanowire sensors with high sensitivity and rapid response times, based on the inducement effect of surfactants during in situ polymerization, nanostructured polyaniline composites are obtained by using a chemical oxidation method by adding a small amount of surfactant. A casting method is employed on interdigitated carbon electrodes. The gas sensitivity to a series of chemical vapors is examined at room temperature. The results indicate that polyaniline with regular nanowire structure is obtained when succinic acid is added. The gas sensitivity and response rates of a film with nanowire structure are much better than those of conventional polyaniline films produced by means of organic solution spin coating methods. The film described in this work shows good selectivity to trimethylamine and other related gases and, the reaction being reversible with the use of high-purity nitrogen.     

双亲性无规离聚物溶液的自组装

由可离子化单体甲基丙烯酸二甲胺乙酯(DMAM)、甲基丙烯酸羟丙酯(HPMA)、疏水性单体丙烯酸异辛酯(EHA)、苯乙烯(St)为共聚单体进行自由基溶液共聚,合成了一系列四元双亲性无规共聚物P(DMAM-co-HPMA-co-EHA-co-St),简称PDHES.以红外光谱、核磁共振、凝胶渗透色谱和差示扫描量热等对共聚物进行了表征;PDHES经乳酸离子化得到荷正电的离聚物PIDHES,以该离聚物在选择性溶剂(N,N-二甲基甲酰胺/水)中进行自组装,得到球形胶束.用紫外光谱仪、动态激光光散射仪、透射电镜和扫描电镜等对其组装过程和结果进行表征,考察了DMAM含量、PDHES离子化程度、离聚物溶液的初浓度等因素对胶束的形成、胶束临界聚集水含量(CWC)和胶束流体动力学半径(Rh)的影响.研究了该离聚物胶束粒子在电场诱导作用下的2次组装行为,考察了不同胶束浓度与电诱导时间对其2次组装行为的影响.