Acridone-Based Host Materials for Green Phosphorescent and Thermally Activated Delayed Fluorescent OLEDs with Low-Efficiency Roll-Offs

By linking the carbazole unit to the nitrogen atom of acridone through phenyl or pyridyl, two compounds, named 10-(4-(9H-carbazol-9-yl)phenyl)acridin-9(10H)-one (AC-Ph-Cz) and 10-(5-(9H-carbazol-9-yl)pyridin-2-yl)acridin-9(10H)-one (AC-Py-Cz) were designed and synthesized. These two materials, characterized with highly twisted and rigid structure, good thermal stability, and balanced carrier-transporting properties, were employed as host materials for green phosphorescent and thermally activated delayed fluorescent organic light-emitting diodes (OLEDs). The carbazole group, despite its small contribution to the highest occupied molecular orbitals (HOMOs) of these two materials, plays an essential role as an intramolecular host in energy delivering and improving the hole transporting ability of these two hosts. The incorporation of the electron-deficient pyridyl group as a linking group slightly improves the electron transporting capability of AC-Py-Cz. The green phosphorescent OLED (PhOLED) based on AC-Py-Cz exhibited excellent device performance with a turn-on voltage of 2.5 V, a maximum power efficiency and an external quantum efficiency (η_ext) of 89.8 lm W⁻¹ and 25.2 %, respectively, benefitting from the better charge-balancing ability of AC-Py-Cz host due to the presence of the pyridyl bridge. More importantly, all the devices based on these two hosts showed low efficiency roll-off at high brightness due to the suppressed non-radiative transition in the emitting layer. In particular, the AC-Py-Cz-hosted green PhOLED exhibited an efficiency roll-off of 1.6 % from the maximum next at a high brightness of 1000 cd m⁻² and a roll-off of 15.9 % at an extremely high brightness of 10000 cd m⁻². This study manifests that acridone-based host materials have great potential in fabricating OLEDs with low efficiency roll-off.     

增强型延迟反馈法控制低维混沌系统的解析研究

基于时间延迟反馈控制混沌系统的方法,提出一种增强型控制方案,并利用分析延迟系统产生Hopf分支条件的方法,给出这种方案控制低维连续自治混沌系统时,在达到控制目标的条件下,控制参数的一般解析关系.将这一方案和分析方法应用到两个混沌模型中,结果表明:采用修正的方案可以明显地改善控制混沌的效果和质量;解析分析的结果与实际数值计算的结果一致. 关键词： 延迟反馈 混沌控制 Hopf分支     

Chaotic oscillations and noise transformations in a simple dissipative system with delayed feedback

We analyze the statistical behavior of signals in nonlinear circuits with delayed feedback in the presence of external Markovian noise. For the special class of circuits with intense phase mixing we develop an approach for the computation of the probability distributions and multitime correlation functions based on the random phase approximation. Both Gaussian and Kubo-Andersen models of external noise statistics are analyzed and the existence of the stationary (asymptotic) random process in the long-time limit is shown. We demonstrate that a nonlinear system with chaotic behavior becomes a noise amplifier with specific statistical transformation properties.     

随机参数Duffing系统中的随机混沌及其延迟反馈控制

研究了谐和激励下含有界随机参数Duffing系统(简称随机Duffing系统)中的随机混沌及其延迟反馈控制问题.借助Gegenbauer多项式逼近理论，将随机Duffing系统转化为与其等效的确定性非线性系统.这样，随机Duffing系统在谐和激励下的混沌响应及其控制问题就可借等效的确定性非线性系统来研究.分析阐明了随机混沌的主要特点，并采用Wolf算法计算等效确定性非线性系统的最大Lyapunov指数，以判别随机Duffing系统的动力学行为.数值计算表明，恰当选取不同的反馈强度和延迟时间，可分别达到抑制或诱发系统混沌的目的，说明延迟反馈技术对随机混沌控制也是十分有效的. 关键词： 随机Duffing系统 延迟反馈控制 随机混沌 Gegenbauer多项式     

Determination of the Constants of Binding of Acridine Dyes with Micelles of Sodium Dodecyl Sulfate Using the Quenching of Delayed Fluorescence by Heavy Atoms

The constants of binding dye molecules with the micelles of sodium dodecyl sulfate are determined using quenching of delayed fluorescence of acridine dyes by sodium iodide in aqueous–micellar solutions. Kinetic equations have been composed that describe the processes of deactivation of the excited states of dyes. By solving these equations at the concentration of the quencher sodium iodide corresponding to the minimum lifetime of triplet states and at the concentration of micelles corresponding to the least value of the delayed fluorescence quenching rate constants, we obtained the constants of binding dyes with micelles equal to 1.3·10⁷, 2.9·10⁷, and 3.1·10⁷ M^–1 for trypaflavine, acridine orange, and acridine yellow, respectively. We calculated the rate constants of quenching of the triplet states of the molecules of dyes by iodide ions (I ^–) that decreased in transition from trypaflavine to acridine orange and acridine yellow.     

Copolymerization of N‐vinylcaprolactam and glycidyl methacrylate: Reactivity ratio and composition control

Free‐radical copolymerizations of N‐vinylcaprolactam (VCL) and glycidyl methacrylate (GMA) were investigated to synthesize temperature‐responsive reactive copolymers with minimized compositional heterogeneity. The average copolymer composition was determined by Fourier transform infrared and nuclear magnetic resonance techniques. The reactivity ratios for VCL and GMA were found to be 0.0365 ± 0.0009 and 6.44 ± 0.36 by the Fineman–Ross method and 0.039 ± 0.006 and 6.75 ± 0.29 by the Kelen–Tudos method, respectively. When prepared by batch polymerization, VCL–GMA copolymers had a highly heterogeneous composition and fractions of different solubilities in water. The use of a gradual feeding technique, which included the sequential addition of more reactive GMA monomer into the reaction, yielded copolymers with much more homogeneous composition. The produced copolymers with 0.9 and 0.11 fractional GMA contents preserved their temperature‐responsive properties and precipitated from aqueous solutions when the temperature exceeded 31 °C. The GMA units in the VCL–GMA copolymers were capable of reacting with amino end‐functionalized poly(ethylene oxide) at room temperature to produce poly(N‐vinylcaprolactam)–poly(ethylene oxide) graft copolymers. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 183–191, 2006     

Effects of delayed linear electrical perturbation of the Belousov-Zhabotinsky reaction: a case of complex mixed mode oscillations in a batch reactor

Delayed feedbacks are quite common in many physical and biological systems and in particular many physiological systems. Delay can cause a stable system to become unstable and vice versa. One of the well-studied non-biological chemical oscillators is the Belousov-Zhabotinskii (BZ) reaction. This gives relaxation oscillations for a considerable period of time under batch conditions. This paper deals with the effect of perturbing the limit cycle oscillation of BZ reaction by employing a delayed electrical feedback to the system under batch conditions. The parameters chosen to study are external resistance and delay. For various resistances and delays the system was electrically perturbed and found to exhibit various complex mixed mode oscillations. The dynamic features are accounted for by the Oregonator model, with time delay incorporated in one of the variables. This revised version was published online in June 2006 with corrections to the Cover Date.     

Importance of the isopropylidene terminal of geranylgeranyl group for the formation of tetraether lipid in methanogenic archaea

Labeling experiments using several deuterated lipids were pursued to study the biosynthesis of macrocyclic isoprenoidal lipids of thermophilic methanogenic archaea, Methanothermobacter thermautotrophicus. The isopropylidene terminal of geranylgeranyl group of monomeric precursor appeared to be important for the CC bond formation at the hydrophobic end in the macrocyclic lipids. A mechanism involving a radical trigger at the allylic methyl group is proposed for this CC bond formation.     

Independent exponential feeding of glycerol and methanol for fed-batch culture of recombinant Hansenula polymorpha DL-1

As a novel feeding strategy for aptomizing human epidermal growth factor (hEGF) production with a recombinant Hansenula polymorpha DL-1 using the methanol oxidase (MOX) promoter in H. polymorpha DL-1, independent exponential feeding of two substrates was used. A simple kinetic model considering the cell growth on two substrates was established and used to calculate the respective feeding rates of glycerol and methanol. In the fedbatch culture with methanol-only feeding, the optimal set point of specific growth rate on methanol was found to be 0.10 h⁻¹. When the fed-batch cultures were conducted by the independent feeding of glycerol and methanol, the actual specific growth rate on glycerol and methanol was slightly lower than the set point of specific growth rate. By the uncoupled feeding of glycerol and methanol the volumetric productivity of hEGF increased from 6.4 to 8.0 mg/(L·h), compared with methanol-only feeding.