A tight-binding study of LUMO states in ellipsoidal silicon nanocrystals

In this paper we report on tight-binding calculations of lowest unoccupied molecular orbitals states for silicon ellipsoidal nanocrystals. The electronic structure has been calculated for different nanocrystal shapes either keeping constant or varying the number of silicon atoms. We have found that changing the ellipsoid aspect ratio a non-obvious energy level structure is obtained. The implications for the infrared optical transitions and their relationship with the polarization of the radiation involved are discussed.     

苯磺酰苯胺类药物理化性能的研究

利用高效液相色谱和分光光度法，研究了新合成的5个苯磺酰苯胺类化合物的酸离解常数和脂溶性，结果表明，他们具有较弱的酸性和合适的脂溶性。预计会有较好的抗肝片吸虫活性。     

Ionic nanocomposites based on XNBR-OMg filled with layered nanoclays

Ionic elastomers based on carboxylated nitrile rubber (XNBR) crosslinked with magnesium oxide (OMg) and filled with layered nanoclays have been prepared. Two types of nanofillers were employed: a commercial one (Cloisite 15 A) and the other prepared in our laboratory (BCA-ODA). The properties of raw and vulcanized compounds have been studied in order to elucidate the effect of layered nanoclays. X-ray diffraction analysis shows that during compounding and crosslinking the macromolecular chains of rubber were intercalated in a commercial nanofiller, whilst our nanoclay was exfoliated. However, this fact does not affect the properties of compounds homogeneously. Vulcanization parameters, Mooney viscosity and decay and rheological properties were affected depending on the filler type. Mechanical properties were not significantly varied, but glass transition temperature and ionic transition temperature were shifted in comparison with those of the unfilled compound.     

Recoil distance half-life measurements of the excited states in 145Sm

A recoil distance method was used to measure half-lives of the excited states of ₁₄₅Sm. The reaction used was ₁₃₉La(₁₀B, 4n)₁₄₅Sm. A plunger system was used. Half-lives were determined for two excited states for the first time. The yrast 27/2₊ state was found to have a half-life of 1.1 ± 0.2 ns corresponding to the retardation of 3.1 × 10₋₄ comparing with the single particle estimate of M1. The excitation energy of this state was well reproduced by the shell model calculation having a mixed configuration of [π{h^11/2(g^7/2)₋₂ (d^5/2)₋₁}¹⁰⁻, νf^7/2] + [π{h^11/2(g^7/2)₋₁}⁹⁻,νh^9/2]. Another retarded E1 transition was also found in a decay of a 21/2₊ state. Its retardation was 1.6 × 10₋₄ comparing with the single particle value. Received: 9 September 1997 / Revised version: 12 June 1998     

Pseudo-spin as a relativistic symmetry

The existence of broken pseudo-spin symmetry in the Pb nucleus has been studied in the relativistic mean field approach using realistic Lagrangian parameters. Its relationship to spin orbit splitting and the vanishingly small surface delta character of the mean spin orbit potential are investigated. In the ²⁰⁸Pb nucleus the broken pseudo-spin doublets are found to exist above the neutron (proton) Fermi surfaces. Received: 16 April 1998 / Revised version: 26 June 1998     

溴化环氧/Novolacs体系在CEM-3板中的应用

分别以PN、BPFN和BPAN为溴化环氧A80的固化剂,以DMP-30、HMTA和2-MZ为促进剂制备CEM-3覆铜板,研究了这三种线型酚醛树脂作为固化剂对CEM-3覆铜板力学性能、电性能、吸水性和耐热性等的影响.结果表明,以三种线型酚醛树脂为固化剂制备的CEM-3覆铜板的力学性能相近,而吸水性由高至低的顺序为PN＞BPFN＞BPAN,介电性能由高至低的顺序为BPFN≈BPAN＞PN,Tg由高至低的顺序为PN＞BPFN＞BPAN.由BPAN和BPFN为固化剂制备的CEM-3覆铜板经150℃/2h后处理,耐变色性明显优于PN为固化剂制备的CEM-3覆铜板.     

Stationary phase properties of the organic molten salt ethylpyridinium bromide in gas chromatography

Summary The organic molten salt, 1-ethylpyridinium bromide, is suitable for use as a stationary phase in gas chromatography. It has a usable liquid temperature range of 110 to 160°C. It undergoes a single phase transition at 110°C which corresponds to the bulk melting point. Below the melting point the phase may be used as a selective adsorbent, although column efficiency and peak symmetry deteriorate as the temperature is lowered from the melting point. Above the melting point, ethylpyridinium bromide can be used to separate a wide variety of organic compounds retaining strongly those compounds possessing large dipole or hydrogen bonding functional groups.     

IMPROVED PROPERTIES OF METALLOCENE-CATALYZED LINEAR LOW-DENSITY POLYETHYLENE/POLYPROPYLENE BLENDS DURING ULTRASONIC EXTRUSION

Metallocene-catalyzed linear low-density polyethylene/polypropylene （mLLDPE/PP） blends were prepared by ultrasonic extrusion in this work. Their extrusion processing behaviors were estimated by online measured data, such as the die pressure and flow rate. Crystallization and mechanical properties of the blends were also investigated. The results show that the addition of PP improves the processing behaviors of mLLDPE, but has little effect on its mechanical properties. On the other hand, the addition of mLLDPE improves the impact strength of PP, but has little effect on its processing behavior. The processing behaviors and mechanical properties of mLLDPE/PP blends get further improved due to the presence of ultrasonic oscillation during extrusion. Compared with PP-rich blends, the apparent viscosity drop of mLLDPE-rich blends is more sensitive to ultrasonic oscillation. The ultrasonic oscillation affects the crystal nucleation, while barely the other crystalline behaviors of the blends.     

Effects of annealing treatment on the properties of MEH-PPV/titania hybrids prepared via in situ sol-gel reaction

A uniform poly[2-methoxy-5-(2′-ethylhexyloxy)-p-phenylenevinylene] (MEH-PPV)/titania hybrid film was successfully prepared by an in situ sol-gel reaction of titanium isopropoxide (TIP) in the presence of MEH-PPV/2-chlorophenol solution. The annealing treatment increased the conversion of TIP to titania as determined from evidence of the formation of Ti-O-Ti bonds in the Fourier transform infrared (FTIR) spectrum. Scanning electronic microscope (SEM) photographs showed that the morphology and distribution of titania in the hybrid film were strongly related to the amount of water in the in situ sol-gel reaction. The thermal stability of MEH-PPV/titania hybrids was enhanced by the annealing treatment. Small angle X-ray scattering (SAXS) and X-ray diffraction (XRD) analyses indicated that annealing treatment promoted the ordered aggregation of the MEH-PPV chains and crystallization of titania to a certain extent. The blue shift in Ultraviolet-visible (UV-vis) absorption of pure MEH-PPV after annealing was ascribed to the small extent of decomposition and coil conformation which occurred at high temperature. A more-obvious blue shift for the hybrids was observed, which resulted from irregular aggregation and coil conformation of the MEH-PPV chains induced by heterogeneous point, TIP (titania). The red shift in the photoluminescent (PL) emission for pure MEH-PPV resulted from a certain extent of ordered aggregation after annealing. However, only a slight red shift in the PL emission peak for the hybrids was found due to the hindrance of ordered aggregation of MEH-PPV chains in the presence of TIP (titania).     

FREQUENCY DEPENDENCE OF THE DIELECTRIC RELAXATION OF 1,2-POLYBUTADIENES

The dielectric loss factor and permittivity of a series of 1, 2-polybutadienes with different contents of 1, 2-units and different contents of syndiotactie 1, 2-units were determined over a frequency range from 30Hz to 100KHz at different temperatures. The WLF equation was evaluated for various samples with T_θat 100KHz as a reference temperature and the master curves of various samples have been constructed, which are in accordance with those calculated by Havriliak-Negami equation. The frequency dependence of the dielectric relaxation of 1, 2-polybutadienes was investigated over a frequency range from 10~0 Hz to 10~(12) ZHz in terms of the experimental data and the master curves.