爆磁压缩发生器通过脉冲变压器对脉冲形成线充电的理论分析

 将爆磁压缩等效为电流源的方法，对爆磁压缩发生器通过脉冲变压器对脉冲形成线充电进行了理论分析，得出爆磁压缩发生器在负载上产生电流波形（简称负载电流）为直线情况和任意电流波形情况下充电电流和充电电压的表达式。分析表明变压器耦合互感与负载电流随时间变化增长率是脉冲形成线充电的两个重要参数，脉冲形成线第一个充电电压峰值与变压器的耦合互感和负载电流波形斜率成正比，负载电流波形斜率的变化可以改变充电电压峰值的时间，斜率不断增加可以延长第一个充电电压峰值时间，从而可能增加充电电压的幅值，提高爆磁压缩发生器能量的利用效率。     

Steady-state electrolysis at a grooved or ridged plane

This study concerns an infinite plane whose smoothness is marred by a single defect: either a groove or a ridge. The blemished plane serves as an electrode supporting a diffusion-controlled steady-state process. By using a convenient coordinate transformation, the local current density at all points on the surface is determined exactly. The results are found to confirm intuitive expectations. Thus, compared with normal values on the plane remote from a groove, the electron transfer rate is diminished within the groove but enhanced along its margins. Similarly, an abnormally large transfer rate is encountered high on the ridge but the rate is subnormal on its lower flanks. The total current is demonstrated to be unchanged by the presence of the blemish. Received: 27 September 1996 / Accepted: 11 March 1997     

300kVA高温超导变压器电流引线漏热损耗的测量

电流引线是高温超导变压器的主要外部漏热来源,它的漏热量直接影响了超导变压器的经济性能,因此,引线的设计与漏热测量一直备受关注。文中构建了一个实验方案,运用量热法测量低压引线的漏热,并将试验结果与仿真预期值进行了对比和分析,从而验证了仿真设计的正确性。     

HL－1装置中LHCD和等离子体参数的关系

本文研究了在ＨＬ－１托卡马克的不同放电阶段的低混杂波驱动特性。给出了驱动电流及驱动效率和等离子体参数，如电子平均密度ｎｅ、等离子体电流Ｉｐ及纵向磁场的关系。也给出和分析了波驱动和入射波功率的关系。在放电平段，对正反向驱动效率进行了研究和比较。     

电场作用下苏氨酸的电流特性研究

制备了以液态苏氨酸为沟道材料的四端有机场效应晶体管,观测了其随着栅极电压的不同呈现出源漏两极之间不同的电学特异现象;还观测了苏氨酸在外电场作用下,阻抗随着源漏之间电压频率变化的关系,提出一个极性液体模型解释了其导电机理。     

The structure of cyclopentene oxide determined by gas phase electron diffraction

The r_g structure of cyclopentene oxide has been determined by the simultaneous least squares analysis of electron diffraction and microwave spectroscopic data. The investigation has reaffirmed previous studies indicating that the molecule prefers a boat conformation. The methylene and epoxide flap angles obtained are 152.3±2.1° and 104.7±1.0° respectively. Other structural parameters determined are: r_g (C-H avg.) = 1.120±0.004 Å; r_g (C-C avg.) = 1.538±0.002 Å; r_g (C-O) = 1.443±0.003 Å, and r_g (C-C) = 1.482±0.004 Å for the carbon-carbon bond in the three membered epoxide ring. These results compare favorably with the reported structures of ethylene oxide and cyclohexene oxide. A tentative rationalization of the unusual boat conformation is also offered.     

Dual microband electrodes: current distributions and diffusion layer ‘titrations’. Implications for electroanalytical measurements

The simulation of transport to double microband electrodes in generator–collector mode is reported focusing especially on the ‘titration curve’ approach to electroanalysis in which a titrant is electrogenerated from a redox active precursor on the generator electrode and reacts homogeneously with the target analyte. The current on the detector electrode reflects the amount of titrant ‘surviving’ passage between the two electrodes. The form of the titration curve – plots of detector current as a function of generator current – is shown to be highly sensitive to the electrode kinetics of the redox couple driven at the generator electrode. Accordingly the naïve use of such methodology for analysis without accompanying simulation and kinetic analysis is fraught with danger. Use of the conformal mapping approach in combination with the ADI method for investigation of the ‘titration’ current distributions at the double band system gives fast and precise simulation of this and similar problems. Convergence analysis is described which allows for the automatic selection of the simulation grid size so as to obtain a chosen accuracy (for example 1%) of the current for all experimentally meaningful values of the geometrical and physico-chemical parameters of the system to be investigated.     

我国化学科普的现状与创新发展对策

Chemistry is a central science. However, the public's recognition of chemistry needs to be promoted, and the prejudice needs to be reduced. Chemical science popularization is a long-term, complex and arduous social education project, which is of great significance to promote social harmony and improve people's quality of life. This paper summarizes the current status of chemical science popularization in China, and puts forward the innovative development countermeasures which focus on improving public participation, training popular science talents, carrying out popular science popularization education at different levels, creating high-quality science popularization works and opening up new positions and approaches of chemical science popularization. This paper has the reference value for the science popularization colleagues.