排序方式: 共有43条查询结果,搜索用时 562 毫秒
1.
2.
微量元素添加剂促进赤霉素分泌及赤霉素速测技术研究 总被引:1,自引:0,他引:1
研究了赤霉素快速分光光度法测定,并首次应用于微量元素添加剂促进赤霉素分泌的研究.结果表明,固体发酵培养基中添加了硼酸、磷酸二氢钾、硫酸镁对促进赤霉素分泌有重要作用.结合使用作者多次筛选得到的高产赤霉素产生菌株等措施,终于研制得含量高达约15000×10-5的固体粉剂,其含量高出一般固体发酵产品的3~5倍. 相似文献
3.
采用分光光度计分别测量了受不同剂量X射线照射后继续培养48h时的人上皮样喉癌细胞株Hep-2的培养基RPMI1640的紫外吸收光谱,分析了该培养基中蛋白质的紫外吸收特性.结果发现:各组培养基的吸收光谱存在明显的差别,新鲜培养基RPMI1640(10%胎牛血清)233nm处的吸收峰在细胞生长过程中位移至235nm,275nm处的吸收峰位移至278nm.反映出各组培养基中芳香族氨基酸中各种氨基酸如色氨酸、酪氨酸、苯丙氨酸的含量的变化,说明癌细胞在生长过程中对这几种氨基酸的改变不是按等量比的.实验还发现细胞培养基的吸收光谱强度与各剂量组细胞数基本成正相关,进而与细胞所受X射线照射的剂量有内在的联系.这些结果将为利用光谱技术研究人喉癌最佳X射线放射剂量奠定基础. 相似文献
4.
对农杆菌介导的烟草遗传转化条件进行探索,以20 mg/L的潮霉素作为转化苗的筛选压,稀释至OD600为O.2~O.3的农杆菌对外植体浸染15 min,于添加300 mg/L头孢霉素的生根培养基中诱导生根,可稳定获得较高的阳性转化率.经PCR和PCR-Souttlern检测,阳性转基因植株达84.8%以上.通过本研究建立了一种稳定高效的功能基因烟草遗传转化体系. 相似文献
5.
应用可视化方法,对生物发酵培养基的营养条件进行优化.以培养基组成构建多维向量空间,通过降维分析法将多维空间的拓扑结构展现在二维平面上,变成可视化图像,并自动产生目标函数等值线.从中得出同时满足各项指标值的最佳操作区域,并运用逆映射公式将得出最优化区域逆推到原高维空间,进而得到最优培养基组成.以锌酵母为例,介绍可视化方法优化全过程. 相似文献
6.
Molecular dynamics (MD) simulations are performed to study adhesion and peeling of a short fragment of single strand DNA (ssDNA) molecule from a graphite surface. The critical peel-off force is found to depend on both the peeling angle and the elasticity of ssDNA. For the short ssDNA strand under investigation, we show that the simulation results can be explained by a continuum model of an adhesive elastic band on substrate. The analysis suggests that it is often the peak value, rather than the mean value, of adhesion energy which determines the peeling of a nanoscale material.The project supported by the Distinguished Young Scholar Fund of NSFC (10225209) and key project from the Chinese Academy of Sciences (KJCX2-SW-L2) 相似文献
7.
The transient elastodynamic responses of the vacuum-filled and liquid-filled pipes surrounded by infinite liquid to external axisymmetric forces are simulated by employing the acoustic-structural coupled finite element method. The time-frequency distributions of the transients waveforms are obtained by the short-time Fourier transform (STFT). Then the influence of the distribution of the external forces on the excitation of the guided waves is analyzed. The study shows that the L(O, 2) mode in the vacuum-filled pipe surrounded by the liquid is suitable for the pipe inspection because it is the fastest mode in a weakly dispersive and at- tenuative region of frequency. And it can be excited with high efficiency in the above region of frequency if the axisymmetric external force is applied on the inner or outer surface of the pipe axially. Analogously, the L(0,3) and L(0,4) modes in the liquid-filled pipe surrounded by the liquid are suitable for the pipe inspection. 相似文献
8.
建立蛹虫草培养基中虫草素的含量测定方法.采用反相高效液相色谱法,以十八烷基键合相硅胶为固定相,0.01mol/L的磷酸二氢钾溶液(pH=6.0)-乙腈(93∶7,V/V)为流动相,检测波长260nm,流速1.0mL/min进行分析.结果 虫草素在2.0-40.0μg·mL-1范围内线性良好(r=0.9999);平均加标回收率分别为96.8%、98.1%和100.9%,RSD分别为3.33%,2.88%和1.60%(n=3);方法精密度RSD为0.29%(n=5).该法分析时间短,结果准确,重现性好,适合人工蛹虫草培养基中的虫草素的含量测定. 相似文献
9.
THREE-DIMENSIONAL STATIC ANALYSES FOR FGM PLATES WITH MEDIUM COMPONENTS AND DIFFERENT NET STRUCTURES
A new microelement method for the analyses of functionally graded structures was proposed. The key of this method is the maneuverable combination of two kinds of elements. Firstly, the macro elements are divided from the functionally graded material structures by the normal finite elements. In order to reflect the functionally graded distributions of materials and the microconstitutions in each macro-element, the microelement method sets up the dense microelements in every macro-element, and translates nodes to the same as the normal finite elements by the degrees of freedom of all microelemental the compatibility conditions. This microelement method can fully reflect the micro constitutions and different components of materials, and its computational elements are the same as the normal finite elements, so it is an effective numerical method for the analyses of the functionally graded material structures. The three-dimensional analyses of functionally graded plates with medium components and different micro net structures are given by using the microelement method in this paper. The differences of the stress contour in the plane of functionally graded plates with different net microstructures are especially given in this paper. 相似文献
10.