Stress-Strain State in the Zone of Load Transfer in a Composite Specimen under Uniaxial Tension

The stress-strain state in the zone of load transfer in a uniaxially stretched specimen made of a unidirectional epoxy carbon-fiber-reinforced plastic (CFRP) is investigated. A parametric analysis of the influence of geometric and mechanical characteristics of the specimen on its stress-strain state is performed by means of finite-element modeling. The parameters allowing us to significantly reduce the dangerous concentration of transverse and tangential stresses are revealed. The mechanical tensile characteristics of a high-strength pultruded unidirectional CFRP are determined experimentally, and the size effect of its strength is estimated.     

A refined stress-strain analysis in the load transfer zone of flat specimens of high-strength unidirectional composites in uniaxial tension 1. Theoretical analysis

With the use of an analytical approach developed, the influence of distribution of a tangential load on the stress concentration in uniaxially tensioned flat specimens of high-strength unidirectional composites near the grips of a testing machine is evaluated. In view of singularity of the analytical solution derived at the points of discontinuity of boundary conditions, for estimating the stress concentration, it is suggested to employ the averaged value of longitudinal stresses, which is calculated by means of an improper integral across the thickness of a near-surface layer. __________ Translated from Mekhanika Kompozitnykh Materialov, Vol. 42, No. 6, pp. 787–796, November–December, 2006.     

单轴晶体内表面入射e光线的双反射

基于光线遵从的Fermat原理,从几何学的角度讨论和分析了在单轴晶体中入射的e光线在界面上的双反射,得到了确定光线反射方向的一般公式,并对几种特殊情况进行了讨论.指出了上述结果与由电磁波的边界条件计算所得结果是一致的.     

Ferromagnetic Properties of Bond-Dilution and Random Positive or Negative Uniaxial Anisotropy Blume-Capel Model

We study the ferromagnetic properties of spin-1 system, which is considered in the frame of the bond dilution and random positive or negative anisotropy Blume-Capel model in the effective field theory and a cutting approximation. The investigation of phase diagrams displays some rich properties of the trajectory of tricritical point, reentrant henomena at low temperatures. Under certain both bond concentrations and random negative anisotropy, there are new transition lines of double tricritical points. So special emphasis is placed on the influence of the bond dilution and random anisotropy on phase diagrams. The magnetizations of the system are also discussed. Some results have not been evealed in previous reports.     

对一个大单轴磁各向异性镍(Ⅱ)配合物中的磁跃迁的直接观察

最近Ruamps和同事发现三角双锥构型的Ni（Ⅱ）配合物[Ni（Me₆tren）Cl]ClO₄（1，Me₆tren=tris（2-（dimethylamino）ethyl）amine）具有大的单轴磁各向异性（J.Am.Chem.Soc.，2013，135：3017-3026）。他们利用HF-EPR研究获得横向零场分裂（ZFS）参数E=1.56（5）cm^-1但未能确定轴向零场分裂参数D。在本工作中，我们利用0~17.5 T和5 K的变磁场远红外光谱（FIRMS）来检测自旋基态S=1中的M_S=±1和M_S=0态之间的磁跃迁。在FIRMS中直接观察到Zeeman分裂态之间的跃迁，得出轴向ZFS参数D=-110.7（3）cm^-1。我们对1的晶体结构进行了Hirshfeld表面分析，揭示了1分子中的阳离子与阴离子之间以及分子之间的相互作用。     

Multiaxial mechanical behavior of aramid fibers and identification of skin/core structure from single fiber transverse compression testing

The transverse and longitudinal mechanical properties of aramid fibers like Kevlar? 29 (K29) fibers are strongly linked to their highly oriented structure. Mechanical characterization at the single fiber scale is challenging especially when the diameter is as small as 15 µm. Longitudinal tensile tests on single K29 fibers and single fiber transverse compression test (SFTCT) have been developed. Our approach consists of coupling morphological observations and mechanical experiments with SFTCT analysis by comparing analytical solutions and finite element modeling. New insights on the analysis of the transverse direction response are highlighted. Systematic loading/unloading compression tests enable to experimentally determine a transverse elastic limit. Taking account of the strong anisotropy of the fiber, the transverse mechanical response sheds light on a skin/core architecture. More importantly, results suggest that the skin of the fiber, typically representing a shell of one micrometer in thickness, has a transverse apparent modulus of 0.2 GPa. That is around more than fifteen times lower than the transverse modulus of 3.0 GPa in the core. By comparison, the measured longitudinal modulus is about 84 GPa. The stress distribution in the fiber is explored and the critical areas for damage initiation are discussed. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2016 , 54, 374–384     

单轴拉伸对Nafion 结构及性能的影响

²H NMR 和PFG-NMR 用于研究拉伸过程中Nafion 结构的改变以及对溶剂分子运动性质的影响．²H 谱表明单轴拉伸Nafion 膜在拉伸比率较低情况下（L < 5），通道排列取向程度随着拉伸比率变大而增大，同时扩散实验表明水分子的运动能力也得到增强，表明取向化的通道网络有助于增强材料取向方向质子的导电能力，可以用于提高质子膜材料性能．在取向达到最大值后（L≥5）继续拉伸，膜内水分子的移动能力相比略有降低．溶胀实验表明取向膜的溶胀行为呈各向异性,拉伸作用致使膜内通道沿拉伸方向取向排列，通道的取向效应使得其在垂直拉伸方向（Y）和膜厚度方向（Z）溶胀更为显著．拉伸Nafion 膜对甲醇的吸附能力随着拉伸比率的增加而增强，同时甲醇的扩散数据显示，甲醇的运动能力在该通道网络中也随着拉伸比率的变大而不断增强，甲醇燃料在该类质子膜内的渗透效
应得以增强，不利于其在直接甲醇燃料电池中的应用．     

变温下橡胶材料力学性能的实验分析

利用Zwick020材料试验机研究了天然橡胶材料在不同温度条件下单向拉伸的大变形力学行为。得到了不同温度和不同加载速率条件下材料的应力-应变关系曲线和材料的破坏条件,由此分析了高温和低温的温度变化条件及加载速率对材料力学性能的影响,得出天然橡胶材料在大变形条件下的温度和加载速率敏感特性。同时利用实验结果拟合出材料的应变能函数,并应用热超弹性模型对材料进行了理论分析。结果表明,理论分析结果与实验结果仅在一定温度范围内吻合得较好,因为材料软化或硬化,在很高或很低的温度情况下二者有一定差别。     

Modeling the mechanical properties of highly oriented polymer films: A fiber/gel composite theory approach

Controlling the extent of orientation is of great interest in polymer processing and is effected by the choice of polymer, the fabrication technique and the processing conditions. Understanding the crystalline transitions that form highly oriented fibrils is necessary for modeling the changes in physical properties, relative to degree of orientation. A model is proposed to describe the mechanical properties of drawn semicrystalline polymer films based on structural transitions. With a minimal amount of experimental data (requiring testing on only two drawn films samples), this model can be used to predict film properties. These properties include the critical and maximum draw ratios, the moduli at the maximum draw ratio, the moduli of the fiber, the modulus of the nonfibrous gel relative to draw ratio, the volume fraction of fibers, and the rate of fibrillation. Where high degrees of uniaxial orientation are required, the polymer is typically drawn in the solid state, meaning the polymer is stretched in a single direction at temperatures below the melting point. During this process, pre‐existing crystallites are transformed into fiber‐like structures with large aspect ratios. The presence of these rigid asymmetric structures significantly enhances the moduli and break strength of the polymer. This work presents a model that describes the formation of fiber‐like structures. The volume fraction of fibers is predicted to be linear in draw ratio. The derived relationship between volume fraction of fibers and draw ratio can then be used for the prediction of the various properties of the oriented film. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 607–618, 2008