Application of laser ablation–inductively coupled plasma-mass spectrometry (LA–ICP–MS) to investigate trace metal spatial distributions in human tooth enamel and dentine growth layers and pulp

Human tooth enamel provides a nearly permanent and chronological record of an individuals nutritional status and anthropogenic trace metal exposure during development; it might thus provide an excellent bio archive. We investigated the micro-spatial distribution of trace metals (Cu, Fe, Mg, Sr, Pb, and Zn) in 196×339 m² raster pattern areas (6.6×10⁴ m²) in a deciduous tooth using laser ablation-inductively coupled plasma-mass spectrometry (LA–ICP–MS). Ablated areas include prenatal and postnatal enamel, the neonatal line, the dentine–enamel junction (DEJ), dentine, and the dentine–pulp junction. Topographic variations in the surface elemental distribution of lead, zinc, strontium, and iron intensities in a deciduous tooth revealed heterogeneous distribution within and among regions. ⁴³Ca normalized elemental intensities showed the following order: Sr>Mg>>Zn>Pb>Fe>Cu. Elevated zinc and lead levels were present in the dental pulp region and at the neonatal line. This study demonstrates the ability of LA–ICP–MS to provide unique elemental distribution information in micro spatial areas of dental hard tissues. Elemental distribution plots could be useful in decoding nutrition and pollution information embedded in their bio apatite structure.Presented in part at the 2002 Winter Conference on Plasma Spectrochemistry, Scottsdale, AZ, January 6–12, 2002. The poster was selected as an outstanding poster presentation.     

3D scanning electron microscopy applied to surface characterization of fluorosed dental enamel

The enamel surfaces of fluorotic teeth were studied by scanning electron stereomicroscopy. Different whitening treatments were applied to 25 pieces to remove stains caused by fluorosis and their surfaces were characterized by stereomicroscopy in order to obtain functional and amplitude parameters. The topographic features resulting for each treatment were determined through these parameters. The results obtained show that the 3D reconstruction achieved from the SEM stereo pairs is a valuable potential alternative for the surface characterization of this kind of samples.     

不同年龄段天然牙的摩擦磨损行为研究

采用往复滑动摩擦磨损试验台考察了不同年龄段的天然牙同钛合金配副时的摩擦学性能.结果表明:天然牙的摩擦磨损行为同年龄密切相关,早期和中期恒牙的摩擦磨损行为相似,磨损表面主要呈现轻微擦伤迹象,中期恒牙的抗磨性能最佳;乳牙及晚期恒牙的摩擦系数变化波动较大,抗磨性能不佳,磨损表面主要呈现严重犁削和剥落特征.     

Prestomal teeth of some flies of medical importance

Comparison of prestomal teeth of adult Chrysomya megacephala, Chrysomya rufifacies, Chrysomya nigripes, Lucilia cuprina, Parasarcophaga dux and Musca domestica was accomplished by use of scanning electron microscopy. The prestomal teeth of C. megacephala, C. rufifacies, L. cuprina and P. dux are all similar in appearance in having various degrees of bifurcation at their tips. In contrast, the tips of the prestomal teeth in C. nigripes are very shallowly serrated, but are comparatively more deeply serrated in M. domestica. These features may help account for the roles these flies may play in matters of medical or veterinary importance, such as causing physical irritation or acting as vectors of disease agents.     

Calibration for Elemental Dental Tissue Analysis by Laser Ablation Inductively Coupled Plasma Mass Spectrometry

Teeth retain different elements at particular stages of life. Hence, the exposure over a selected time span may be characterized by laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS). A Nd:YAG laser with emission at 266?nm was coupled to a quadrupole ICP-MS for the quantitative study of historical human teeth for Sr and Ba, elements of anthropological significance. A calibration approach incorporating the experimentally derived k coefficient is reported. The coefficients were established based on the mean concentrations of the analytes determined by pneumatic nebulization ICP-MS using acid-digested calcium phosphate standards and the intensities recorded during laser ablation of corresponding standards as pellets. The k values were 0.54?±?0.05 (µg?g^?1)^?1 and 4.49?±?1.09 (µg?g^?1)^?1 for Sr and Ba, respectively. This calibration approach provided local quantitative data and demonstrated statistically significant differences in Sr concentrations in enamel and dentine.     

口腔环境因素对树脂牙摩擦学特性的影响

采用往复滑动摩擦磨损试验台，通过体外模拟口腔环境，考察了树脂牙同TA2钛球对摩时的摩擦磨损性能，探讨了几种口腔环境因素对树脂牙摩擦学性能的影响．结果表明：树脂牙在人工唾液介质中同钛球对摩时表现出较好的摩擦磨损性能；随着法向咬合力增加，树脂牙的主要磨损机制由轻微磨粒磨损转变为严重粘着磨损，耐磨性能变差；人工唾液和碳酸饮料长期浸泡处理对树脂牙摩擦磨损性能影响很小；而在温度0～60℃范围内经热循环老化预处理后树脂牙的耐磨性显著降低．     

Wavelength-Resolved 3-Dimensional Fluorescence Lifetime Imaging

We have developed a compact system for wide-field fluorescence imaging, resolved in three spatial dimensions, lifetime and wavelength, that is based on a gated optical intensifier and an all-solid-state diode pumped Cr:LiSAF oscillator-amplifier system. Exploiting spectral separation, the system has been applied to human teeth, obtaining good lifetime contrast between enamel, dentin and caries. Exploiting spectral separation combined with depth resolution, the study of fluorescent microspheres led to an enhancement in both lifetime contrast and lateral resolution.     

Stable isotope analysis of white-tailed deer teeth as a paleoenvironmental proxy at the Maya site of La Joyanca,northwestern Petén,Guatemala*

ABSTRACT

Carbon and oxygen isotopes ratios from herbivore teeth have previously been used as paleo-environmental proxies in temperate zones. However, their utility in tropical zones remains uncertain. In this study, sequential sub-samples from white-tailed deer (Odocoileus virginianus) teeth (second and third molars) from the Maya archaeological site of La Joyanca, located in northwestern Petén, Guatemala, show that δ¹⁸O of enamel carbonate corresponds broadly to modern observed precipitation δ¹⁸O over the 10-month period of tooth formation, capturing rainfall seasonality. The analyses also detect significant diachronic differences in the δ¹⁸O between the periods 1100–1000 BP (850–950 A.D.) and 1000–900 BP (950–1050 A.D.) at La Joyanca. The δ¹³C in both periods are indicative of a C₃-plant based diet, which suggests cultivation of maize did not differentially affect deer diet during this period.     

天然牙和牙科材料的摩擦学研究现状与进展

评述了口腔摩擦学系统的特征与参数、口腔磨损环境以及天然牙和牙科材料的磨损机理,简要介绍了目前国内外关于天然牙和牙科材料的磨损性能测量方法以及口腔磨损环境模拟测试系统的研究现状,指出今后在考虑化学环境和各种力等因素协同作用条件下,应加强牙科材料的磨损机理、磨损预测模型及其标准的实验方法和模拟系统的建立等方面的研究.     

Investigation of dental samples using a 35MHz focussed ultrasound piezocomposite transducer

Dental erosion and decay are increasingly prevalent but as yet there is no quantitative monitoring tool. Such a tool would allow earlier diagnosis and treatment and ultimately the prevention of more serious disease and pain. Despite ultrasound having been demonstrated as a method of probing the internal structures of teeth more than 40 years ago, development of a clinical tool has been slow. The aim of the study reported here was to investigate the use of a novel high frequency ultrasound transducer and validate it using a known dental technique.A tooth extracted for clinical reasons was sectioned to provide a sample that contained an enamel and dentine layer such that the enamel-dentine junction (EDJ) was of a varying depth. The sample was then submerged in water and a B-scan recorded using a custom-designed piezocomposite ultrasound transducer with a centre frequency of 35 MHz and a −6 dB bandwidth of 24 MHz.The transducer has an axial resolution of 180 μm and a spatial resolution of 110 μm, a significant advance on previous work using lower frequencies. The depth of the EDJ was measured from the resulting data set and compared to measurements from the sequential grinding and imaging (SGI) method.The B-scan showed that the EDJ was of varying depth. Subsequently, the EDJ measurements were found to have a correlation of 0.89 (p < 0.01) against the SGI measurements. The results indicate that high frequency ultrasound is capable of measuring enamel thickness to an accuracy of within 10% of the total enamel thickness, whereas currently there is no clinical tool available to measure enamel thickness.