单光子探测器量子效率的绝对自身标定方法

提出一种单光子探测器量子效率的绝对自身标定方案，利用光参量下转换过程中产生的光子对在时间上的相关性，先将参量光束分为两路，然后引入相对延时，使同时产生的孪生光子先后进入单光子探测器，然后将探测器之后的电路分为三路，其中一路直接进入计数器得到探测器所探测到的光子的总计数率，另两路用电路方法引入和光路相当的相对延时，经符合电路后进入计数器，得到前后到达探测器的光子对之间的符合计数率.这样，从符合计数率与总光子计数率之比即可在不需要任何其他探测器或者参照标准的情况下获得探测器的量子效率.文中给出两种方案，分别适     

Volume of Domains in Symmetric Spaces

The authors derive a formula for the volume of a compact domain in a symmetric space from normal sections through a special submanifold in the symmetric space.This formula generalizes the volume of classical domains as tubes or domains given as motions along the submanifold.Finally,some stereological considerations regarding this formula are provided.     

Thermally Induced Measurement Error by a Water-Cooled Enthalpy Probe

Errors in stagnation-pressure measurement, due to a large temperature gradient at the face of a water-cooled enthalpy probe, were experimentally measured and numerically simulated. Two probes were used to measure the stagnation-pressure in a dc plasma jet; a standard water-cooled enthalpy probe and an uncooled ceramic (Thoria) probe. There was a maximum difference of 10% between the two measurements, with the water-cooled probe measuring lower pressures. Numerical simulations of plasma flow around the probe showed that the magnitude of the error depends on the thickness of the thermal boundary layer. The measurement error causes a maximum of 3% error in velocity measurements, using the Bernoulli equation. This error is no worse than other measurement errors associated with water-cooled enthalpy probe meaurements.     

Toxicological screening of human plasma by on‐line SPE‐HPLC‐DAD: identification and quantification of acidic and neutral drugs

A multi‐analyte screening method for the quantification of 50 acidic/neutral drugs in human plasma based on on‐line solid‐phase extraction (SPE)–HPLC with photodiode array detection (DAD) was developed, validated and applied for clinical investigation. Acetone and methanol for protein precipitation, three different SPE materials (two electro‐neutral, one strong anion‐exchange, one weak cation‐exchange) for on‐line extraction, five HPLC‐columns [one C₁₈ (GeminiNX), two phenyl‐hexyl (Gemini C₆‐Phenyl, Kinetex Phenyl‐Hexyl) and two pentafluorophenyl (LunaPFP(2), KinetexPFP)] for analytical separation were tested. For sample pre‐treatment, acetone in the ratio 1:2 (plasma:acetone) showed a better baseline and fewer matrix peaks in the chromatogram than methanol. Only the strong anion‐exchanger SPE cartridge (StrataX‐A, pH 6) allowed the extraction of salicylic acid. Analytical separation was carried out on a Gemini C₆‐Phenyl column (150 × 4.6 mm, 3 µm) using gradient elution with acetonitrile–water 90:10 (v/v) and phosphate buffer (pH 2.3). Linear calibration curves with correlation coefficients r ≥ 0.9950/0.9910 were obtained for 46/four analytes. Additionally, this method allows the quantification of 23 analytes for therapeutic drug monitoring. Limits of quantitation ranged from 0.1 (amobarbital) to 23 mg/L (salicylic acid). Inter‐/intra‐day precisions of quality control samples (low/high) were better than 13% and accuracy (bias) ranged from ?14 to 10%. A computer‐assisted database was created for automated detection of 223 analytes of toxicological interests. Four cases of multi‐drug intoxications are presented. Copyright © 2015 John Wiley & Sons, Ltd.     

A Water-Stable Lanthanide Coordination Polymer as Multicenter Platform for Ratiometric Luminescent Sensing Antibiotics

As a hot topic of global concern, the distinguishing and detecting of antibiotic pollution is crucial owing to its adverse effect on ecosystems and human health stemming from excessive use and poor management. Herein, a water-stable lanthanide coordination polymer sensor (Dy-TCPB) with multiple emitting centers is prepared. The versatile Dy-TCPB can conveniently differentiate various antibiotics, and displays a self-calibration luminescent response to nitrofurazone (NFZ) and furazolidone (FZD). Each antibiotic exhibits notable correlation to a unique combination of the two ligand-to-Dy ion emission intensity ratios, enabling two-dimensional fingerprint recognition. Furthermore, the novel self-calibration sensor demonstrates effective recognition of NFZ and FZD with excellent sensitivity and selectivity, and detection limits as low as 0.0476 and 0.0482 μm for NFZ and FZD, respectively. The synthetic approach for the fabrication of a singular coordination polymer exhibiting multiple emissions provides a promising strategy for the development of facile and effective ratiometric sensors.     

A novel microwave assisted reverse micelle fabrication route for Th (IV)‐MOFs as highly efficient adsorbent nanostructures with controllable structural properties to CO and CH4 adsorption: Design,and a systematic study

Reducing gas contaminants by affordable and effective adsorbents is a major challenge in the 21^st century. In the present study, thorium metal organic framework (Th‐MOF) nanostructures are introduced as highly efficient adsorbents. These compounds were manufactured via a novel route resulting from the development of microwave assisted reverse micelle (MARM) and ultrasound assisted reverse micelle (UARM) methods. The products were characterized utilizing XRD, SEM, TGA/DSC, BET, and FT‐IR analyses. Based on the results, the samples synthesized by MARM had uniform size distribution, high thermal stability, and significant surface area. Calculations using DFT/B3LYP indicated that the compounds have a tendency to the polymeric form, which could theoretically confirm the formation of Th‐MOF. Results of analysis of variance (ANOVA) showed that synthesis parameters played a critical role in the manufacturing of products with distinctive properties. Response surface methodology (RSM) predicted the possibility of creating Th‐MOF adsorbents with the surface area of 2579 m²/g, which was a considerable value in comparison with the properties of other adsorbents. Adsorption studies showed that, in the optimum conditions, the Th‐MOF products had high adsorption capacity for CO and CH₄. It is believed that the synthesis protocol developed in the present study and the systematic studies conducted on the samples which lead to products with ideal adsorption properties.     

彩虹自标定方法对混合喷雾比例的原位测量

传统彩虹测量技术标定复杂、精度可重复性差且难以适应密闭空间。一种基于多彩虹谱线自标定方法,可省去原有的标定系统装置,将标定过程内化于对彩虹信号的处理,以水为例的测量偏差仅为0.13%。将该技术应用于混合喷雾液滴组分浓度测量中,探究并优化了参与混合的两种液体组分的方案。实验采用60%乙醇-水混合喷雾,原位测量了混合喷雾场多点组分浓度,测量结果差别可以控制在0.5%以内,表明该方法技术在相关领域的应用潜力。     

高中化学必修课程“变化观念与平衡思想”学科核心素养的系统构成研究

“变化观念与平衡思想”学科核心素养的系统构成对开展“素养导向”的教学与评价具有重要意义。通过课标分析,基于学科能力模型明确了高中必修学段“变化观念与平衡思想”核心素养的核心知识与活动经验、认识方式、研究对象及问题情境、学科能力活动及其表现等4个维度的具体内涵,系统建构了高中化学必修课程“变化观念与平衡思想”学科核心素养模型。     

三线摆实验中摆角偏大产生的误差及修正方法

研究了三线摆实验中摆角偏大(5°θ20°)时对测量转动惯量产生的误差和修正办法。实验发现随着摆角的增大,测得的圆盘转动惯量也会相应偏大,从而导致测量误差增大。文章通过进一步的理论分析解释了这一现象,并对测量结果进行了系统误差修正。     

真值、随机误差、系统误差的新定义

我国计量技术规范《JJF1001—1998通用计量术语及定义》对真值、随机误差和系统误差给予了新的定义,对过去的定义作了原则上的改变.本文对新定义的科学性和合理性进行了讨论,并建议在大学物理实验教学和教材中采用.