超流研究的历史回顾

回顾了超流发现的历史，介绍了超流的一些现象、理论以及新近的研究结果。强调指出超流与超导一样是一种宏观量子现象。     

几种陆用惯性自寻北方案的比较

介绍几种目前广泛应用于军事及民用工业领域的高精度自寻北方案,同时讨论并分析了这些方案的精度和误差补偿方法,提出在兵器领域尤其是在陆用车辆上的适用性等问题。     

Shock cooling of liquid nitrogen and superfluid helium

Abstract

Superfluid Helium (11) and liquid nitrogen are the only liquids which have been shown experimentally, to exhibit shock cooling. In the present paper we use the Landau model to demonstrate theoretically that the roton gap, which decreases with increasing density, plays the same role leading to shock cooling in liquid helium as the dissociation energy does in liquid nitrogen.     

Towards a solid-state ring laser gyroscope

In this paper, we report our recent progress towards a solid-state ring laser gyroscope (RLG), where mode competition is circumvented by active control of differential losses, and nonlinear effects are mitigated by longitudinal vibration of the gain medium. The resulting dynamics is significantly different from that of a classical helium–neon RLG, owing in particular to parametric resonances that occur when the Sagnac frequency is an integer multiple of the crystal vibration frequency. We describe the main experimental and theoretical results obtained so far, and the prospects of practical applications in the near future.     

Dark lump excitations in superfluid Fermi gases

We study the linear and nonlinear properties of two-dimensional matter-wave pulses in disk-shaped superfluid Fermi gases.A Kadomtsev-Petviashvili I(KPI) solitary wave has been realized for superfluid Fermi gases in the limited cases of Bardeen-Cooper-Schrieffer(BCS) regime,Bose-Einstein condensate(BEC) regime,and unitarity regime.Onelump solution as well as one-line soliton solutions for the KPI equation are obtained,and two-line soliton solutions with the same amplitude are also studied in the limited cases.The dependence of the lump propagating velocity and the sound speed of two-dimensional superfluid Fermi gases on the interaction parameter are investigated for the limited cases of BEC and unitarity.     

速率光纤陀螺寻北仪倾斜补偿算法研究

针对速率光纤陀螺寻北仪,提出了一种倾斜补偿算法.通过采用积分滑动和最小二乘拟合滤波技术,对光纤陀螺和加速度计原始测量信号进行数据处理.试验数据表明,采用本算法解决了由倾斜角存在影响其寻北准确度的关键技术问题.同时给出了提高光纤陀螺寻北仪的准确度的可能因素.     

激光陀螺磁灵敏度特性研究

分析、计算了激光陀螺的磁灵敏度特性,并进行了磁灵敏度试验.试验结果及分析表明：在腔体加工准确度不变的情况下,采用合理的设计可以大大降低激光陀螺在某些方向上的磁灵敏度,同时磁试验结果对于设计激光陀螺的磁屏蔽结构具有一定的实用价值.     

单轴旋转对惯导系统误差特性的影响

分析了单轴旋转惯导系统自动补偿的基本原理,对陀螺和加速度计常值漂移、安装误差、标度因数误差等因素在单轴旋转下的调制情况进行了研究。通过仿真分析了转动速度对各种误差的影响规律,指出了实际系统旋转速度和方式的选择要综合考虑陀螺的常值漂移和标度因数误差的影响。利用激光捷联惯导系统在实验室中进行了单轴旋转IMU实验,其定位精度优于1nm／24h。研究结果可以为单轴旋转惯导系统的进一步优化和工程设计提供理论参考。     

振动陀螺仪单向时滞耦合系统的摄动分析

针对振动陀螺仪单向时滞耦合系统,研究了角速度、耦合强度、耦合时滞与系统输出信号之间的关系,着重关注耦合时滞对待检测角速度测量结果的影响．本文采用摄动法对振动陀螺仪单向时滞耦合系统进行理论分析,得到了系统输出信号、系统振动边界和待检测角速度的近似表达式,并将数值和近似计算结果进行了对比．理论分析结果与数值结果比较吻合,验证了运用摄动法分析振动陀螺仪单向时滞耦合系统的有效性,也表明了在运用摄动法分析系统时具有局限性．     

微机械陀螺的发展现状

随着对微电子机械系统(MEMS)的深入研究和取得的进展,属于MEMS研究内容之一的微机械陀螺,在汽车工业需求的推动下,已经成为过去几十年内广泛研究和发展的主题.微机械陀螺与传统机械式陀螺、固体陀螺、光学陀螺等相比,具有成本低、尺寸小、重量轻、可靠性高等优点,其精度正不断得到提高,应用领域也随之不断扩大.本文首先简要介绍了微机械陀螺的定义及特征、性能指标、工作原理、分类以及加工技术,随后对已出现的不同类型微机械陀螺的结构、加工方式、工作原理以及性能进行了综述,最后对微机械陀螺的商业化现状以及发展趋势进行了展望.