D—^3He聚变动力可行性研究

本文首先简要地讨论D-3He聚变的物理要求并与D-T聚变作相应的比较,然后运用目前的约束定律和第一稳定区β极限,对计划的近期ETR规模装置(如CIT,TIBER,FER,NET)进行D-3He得失相当和点火实验的可行性研究,并对高径比第二稳定区D-3He托卡马克堆进行参数学研究,最后指出潜在的缩短商用化进程可能性。     

非定常机匣处理扩稳实验研究

针对一种非定常处理机匣,在轴流风扇实验台上开展偏流吹气扩稳实验研究.主要包括t改善风扇稳定裕度的稳态特性;影响失速先兆波产生及发展的动态分析.结果表明:非定常机匣处理能够在不同工作转速下对风扇稳定裕度有显著效果,效率没有明显改变.偏流吹气可以进一步改善风扇稳定裕度,但同时也会带来一定的效率损失.动态分析证实处理机匣没有阻止失速先兆波的出现.而是有效地抑制了其非线性发展.     

Safety margin criterion of nonlinear unbalance elastic axle system

IntroductionAtpresentanewanddevelopingsubject—chaoticdynamicsstartsabroadprospectforanalysisofnonlinearsystem[1～ 5 ].Largerotatingmachineryisatypicalnonlinearnon_autonomoussystem .Thesaferunofrotorsystemisofgreatsignificancetosociallifeandeconomicdevelopment.Thestabilityisthekeytosafeoperation .Thesafestabilityanalysisandcontrolforlargesystemisnotonlyamajorbasicresearchbutalsoisveryimportanttosolvethesafeproblemsinlifeandproduction[6 ,7].Soar,althoughmanymathematicians,mechanistsandengineer…     

基于博弈论的融资租赁保证金确定方法研究

针对融资租赁中租金偿还违约风险的防范问题,研究了如何合理设置租赁保证金来防范违约风险.运用博弈理论建立了租金偿还的动态博弈模型,采用逆向归纳法求解该博弈模型并推导出了预防性保证金确定方法及其适用条件,通过边界条件的改变继而推导出了补偿性保证金确定方法及其适用条件.算例分析表明,运用两种方法来计算租赁保证金时,只需已知租赁项目各期租金和租赁资产的价值而无需知道租赁项目的各期收益,仅以出租人预期租赁项目在各期的收益与租金之间的大小作为判据来选择保证金确定方法.两种保证金确定方法具有较高的实用性和可操作性,是出租人合理地确定租赁保证金的有效方法.     

Valuation of futures options with initial margin requirements and daily price limit

The paper presents a valuation model of futures options trading at exchanges with initial margin requirements and daily price limit, and this result gives an academic guidance to design trading rules at exchanges. Unlike the leading work of Black, certain trading rules are considered so as to be more fit for practical futures markets. The paper prices futures options with initial margin requirements and daily price limit by duplicating them with the help of the theory of backward stochastic differential equations （BSDEs, for short）. Furthermore, an explicit expression of the price Of the call （or the put） futures option is given and also is shown to be the unique solution of the associated nonlinear partial differential equation.     

弯曲动叶对跨音轴流压气机性能的影响

对具有弯曲动叶的跨音轴流压气机性能的数值研究表明,反弯曲动叶中通道激波沿径向倾斜角度最大,在顶部移向下游,在中部移向前缘,提高了失速裕度,但也增加了中部损失,反弯曲动叶级效率最低。正弯曲动叶中通道激波在顶部前移,失速裕度下降,通道激波近似为径向,负荷沿叶高分布均匀,气动效率最高。通道激波位置合理分布是弯曲动叶改型设计成功的关键。     

Highly stable dielectric frequency response of chemically synthesized Mn-substituted ZnFe2O4

The tenacity of the present study was to develop a material using an economical chemical route, having balance between magnetic and dielectric order parameters for maximum transmittance of electromagnetic waves in order to use them in shielding materials. In this context, Mn-Zn ferrites were prepared using a wet chemical based sol-gel auto-combustion technique. X-ray diffraction confirmed the pure phase formation of samples, while some impurity peaks were also present for the higher value of Mn substitution. Field emission scanning electron microscopy revealed a decrease in grain size with increasing Mn substitution. While energy dispersive X-ray spectroscopy confirmed the elemental composition of pure and Mn substituted samples, the dielectric constant, dielectric loss and tangent loss were decreased with increasing frequency and increasing Mn substitution. The complex electric modulus was found to be a function of frequency and values of complex electric modulus were increased with increasing frequency and Mn substitution. The complex impedance of RC series circuit and RC parallel circuit was also decreased with increasing both the parameters while AC conductivity was increased in the series. Dielectric frequency response was also studied for the prepared samples and the best match was found with expected results. The Nyquist and Cole-Cole plots revealed the semi-conductive behavior at higher frequency and Mn substitution also yielded the same results. The relative stability of the samples to be used as dielectric materials was also studied using Bode and Nichols plots, and a comparatively high gain margin was observed, well suitable for potential applications in electromagnetic shielding.     

Experimental and Numerical Investigation on Effects of the Steam Ingestion on the Aerodynamic Stability of an Axial Compressor

In order to investigate the influence of steam ingestion on the aerodynamic stability of a two-stage low-speed axial-flow compressor, multiphase flow numerical simulation and experiment were carried out. The total pressure ratio and stall margin of the compressor was decreased under steam ingestion. When the compressor worked at 40% and 53% of the nominal speed, the stall margin decreased, respectively, by 1.5% and 6.3%. The ingested steam reduced the inlet Mach number and increased the thickness of the boundary layer on the suction surface of the blade. The low-speed region around the trailing edge of the blade was increased, and the flow separation region of the boundary layer on the suction surface of the blade was expanded; thus, the compressor was more likely to enter the stall state. The higher the rotational speed, the more significant the negative influence of steam ingestion on the compressor stall margin. The entropy and temperature of air were increased by steam. The heat transfer between steam and air was continuous in compressor passages. The entropy of the air in the later stage was higher than that in the first stage; consequently, the flow loss in the second stage was more serious. Under the combined action of steam ingestion and counter-rotating bulk swirl distortion, the compressor stability margin loss was more obvious. When the rotor speed was 40% and 53% of the nominal speed, the stall margin decreased by 6.3% and 12.64%, respectively.     

主动发起的融资融券交易对中国股票市场的影响

本文以融资买入和融券卖出为研究对象,分析了投资者主动发起的融资融券交易对股票回报、流动性和波动性的影响,给出了中国股票市场融资融券发展现状。研究发现,融资买入(融券卖出)对当日股票回报有显著为正(负)的影响,交易表现与政策制定动机——融资反映投资者看涨情绪、融券反映投资者看跌情绪一致。此外,融资买入(融券卖出)增加了(降低)股票流动性;融资买入(融券卖出)降低(增加)了股票波动性;融资融券对股票交易特征的影响有随时间逐渐改善的趋势。最后,本文发现融资融券对股票回报、流动性和波动性产生的影响与股票所在板块有关,随着中小板和创业板股票所占比重的增加,调整和优化融资融券对股票市场的影响仍然是监管者未来主要任务之一。     

Safe bounds in linear and mixed-integer linear programming

Current mixed-integer linear programming solvers are based on linear programming routines that use floating-point arithmetic. Occasionally, this leads to wrong solutions, even for problems where all coefficients and all solution components are small integers. An example is given where many state-of-the-art MILP solvers fail. It is then shown how, using directed rounding and interval arithmetic, cheap pre- and postprocessing of the linear programs arising in a branch-and-cut framework can guarantee that no solution is lost, at least for mixed-integer programs in which all variables can be bounded rigorously by bounds of reasonable size. Mathematics Subject Classification (2000):primary 90C11, secondary 65G20