Modification of Polylactide Nonwovens with Carbon Nanotubes and Ladder Poly(silsesquioxane)

Electrospun nonwovens of poly(L-lactide) (PLLA) modified with multiwall carbon nanotubes (MWCNT) and linear ladder-like poly(silsesquioxane) with methoxycarbonyl side groups (LPSQ-COOMe) were obtained. MWCNT and LPSQ-COOMe were added to the polymer solution before the electrospinning. In addition, nonwovens of PLLA grafted to modified MWCNT were electrospun. All modified nonwovens exhibited higher tensile strength than the neat PLA nonwoven. The addition of 10 wt.% of LPSQ-COOMe and 0.1 wt.% of MWCNT to PLLA increased the tensile strength of the nonwovens 2.4 times, improving also the elongation at the maximum stress.     

混凝土动态劈裂拉伸试验的数值模拟

采用LS-DYNA有限元编码程序，对混凝土的动态劈裂拉伸试验进行了数值模拟，给出了混凝土试样在不同类型加载情况下应力分布之间的差异，证实了动态劈裂拉伸试验的有效性，提出了改进试验方法的若干结论．     

Statistical Analysis of the Effect of Mineral Admixtures on the Strength of the Interfacial Transition Zone

Microscopic evidence indicates that the thickness of the interfacial transition zone (ITZ) between the aggregate and the cement paste is modified when mineral admixtures partially replace portland cement. Unfortunately, there is limited information on the significance of these microscopic modifications to the mechanical properties of the ITZ. This research reports experimental results on the shear and tensile strength of the ITZ as affected by the addition of the following mineral admixtures: silica fume, fly ash, and natural pozzolan. Statistical analysis was used to identify the significant parameters affecting the tensile and shear strength of the ITZ. Experimental results indicate that not only does the incorporation of silica fume and fly ash increase the strength of the ITZ, these mineral admixtures have a greater influence on the strength increase of the ITZ than in the strength increase of the cement paste.     

Molecular flow and wall collision age distributions

The use of storage cells has become a standard technique for internal gas targets in conjunction with high energy storage rings. In case of spin-polarized hydrogen and deuterium gas targets the interaction of the injected atoms with the walls of the storage cell can lead to depolarization and recombination. Thus the number of wall collisions of the atoms in the target gas is important for modeling the processes of spin relaxation and recombination. It is shown in this article that the diffusion process of rarefied gases in long tubes or storage cells can be described with the help of the one-dimensional diffusion equation. Mathematical methods are presented that allow one to calculate collision age distributions (CAD) and their moments analytically. These methods provide a better understanding of the different aspects of diffusion than Monte Carlo calculations. Additionally it is shown that measurements of the atomic density or polarization of a gas sample taken from the center of the tube allow one to determine the possible range of the corresponding density weighted average values along the tube. The calculations are applied to the storage cell geometry of the HERMES internal polarized hydrogen and deuterium gas target. Received 9 July 2001 and Received in final form 18 September 2001     

高强混凝土弯压极限应变试验研究与计算

由于混凝土材料理化特性的差异,高强混凝土的弯压极限应变明显地小于普通混凝土,依据试验结果分析了高强混凝土的弯压极限应变变化规律,并给出了它的计算公式.     

UNIQUENESS PROBLEM WITH TRUNCATED MULTIPLICITIES OF MEROMORPHIC MAPPINGS FOR MOVING TARGETS

In this article,two uniqueness theorems of meromorphic mappings on moving targets with truncated multiplicities are proved.     

红外图像掠海小目标的检测算法研究

针对红外图像掠海小目标信噪比低，且易受到水天线和背景杂波干扰的特点，提出了一种红外掠海小目标的提取与检测算法。该方法的特点是：首先采用中值滤波来减小噪声，并提出了差方和算法，用以抑制背景噪声并对目标增强；再采用了图像行扫描法有效地滤除水天线；最后通过弱化背景边缘和阈值分割等综合算法得到候选小目标。仿真结果表明，该算法达到了较好的效果。     

Thermal Oxidative Stability of Heat-Stabilised Polyamide 66 by Differential Scanning Calorimetry

The thermal stability of heat-stabilised polyamide 66 in an oxidative environment is evaluated by DSC. The oxidative stability of the polyamide decreases as a result of repeated injection moulding. The results also indicate that the presence of glass fibres in the polyamide has a negative influence on the oxidative stability. Both isothermal and dynamic DSC measurements seem to be useful tools for assessing the stability of polyamides and there is a relationship between data determined using both procedures. This revised version was published online in July 2006 with corrections to the Cover Date.     

ICP-AES法测定混凝土外加剂中微量氯离子

由于Cl^-过量引起混凝土钢筋锈蚀而过早的破坏，已成为世界性问题。混凝土外加剂中微量Cl^-是一个重要指标，准确测定氯离子的含量直接关系到混凝土配比的确定及浇灌后的质量。部颁及行业标准中是采用电化学滴定法和蒸馏法来测定混凝土外加剂的微量Cl^-[1,2]，电化学滴定法对测定干扰大。本文采用电感耦合等离子体原子发射光谱法间接测定与微量Cl^-定量反应后剩余的Ag^ 含量，从而换算出Cl^-的含量，经回收验证及比较，证明本法简便、灵敏、快速，切实可行。     

Calorimetric studies of refractory corundum

Calorimetry has been used in the investigations of calcium aluminate materials produced as a binder for aluminate-corundum composites of high refractoriness. The kinetics and of hydration process was thus characterized and the optimum compositions of initial binders and cement-corundum refractory filler blends could be selected for further tests. The acceleration of heat evolution - the shortening of so-called induction period and relatively high heat output in the presence of corundum was observed. It means the acceleration of hydration process, that is early crystallisation of hydration products and subsequent further dissolution of initial anhydrous aluminate phases. In the presence of fine grained corundum particles these phenomena should be attributed to the nucleating effect of fine corundum particles. This revised version was published online in July 2006 with corrections to the Cover Date.