Geometry of random sequential adsorption

By sequentially adding line segments to a line or disks to a surface at random positions without overlaps, we obtain configurations of the one- and two-dimensional random sequential adsorption (RSA) problem. We have simulated the one- and two-dimensional problem with periodic boundary condition. The one-dimensional simulations are compared with the exact analytical solutions to give an estimate of the accuracy of the simulation. In two dimensions the geometrical properties of the RSA configuration are discussed and in addition known results of the RSA process are reproduced. Various statistical distributions of the Voronoi-Dirichlet (VD) network corresponding to the RSA disk configuration are analyzed. In order to characterize pores in the RSA configuration, we introduce circular holes. There is a direct correspondence between vertices of the VD network and these holes, and also between direct/indirect geometrical neighbors and these holes. The hole size distribution is found to be a parabola. We also find general relations that connect the asymptotic behavior of the surface coverage, the correlation function, and the hole size distribution.     

一套新型基于物理放大原理的微小长度测量工具的设计

设计了一套利用圆盘放大和普通长度测量工具相结合的测量微小长度的工具,分别利用该设计装置和螺旋测微器对钢丝的直径和普通A4纸张的厚度进行了测量。结果显示了新设计的可行性、创新性和数据的高精度性、准确性。     

Perpendicular magnetic recording—Its development and realization—

The principle of conventional magnetic recording is that magnetic fields are applied parallel to the plane of the magnetic medium. As described in this paper, the invention and development of a new method of placing the magnetized information perpendicular to the plane of the magnetic recording medium is presented. The yield in the mass production of high-density hard disk drives (HDDs) for perpendicular recording is much higher than that of HDDs for conventional recording. Consequently, it is estimated that as many as 75% of the 500 million HDDs to be shipped this year will use this technology.     

瞄准制导仪中的调制盘光学系统分析

瞄准制导仪中的调制盘光学系统包含有光束投射系统、光束投影系统和旋转调制盘。基于旋转调制盘图案设计的原理,分析了瞄准制导仪中内、外调制图案与光学系统的配合问题。较详细地分析了激光束投射系统和投影系统。     

Optical and Thermal Simulator for Laser-assisted Magnetic Recording

“Laser-assisted magnetic recording”, in which a recording media is heated by a laser beam while writing data, is attracting attention as a technology that enables a recording density of 1 Tb/in.². There exists another technology for media in which the recording layer is constructed with many small projections that enable high magnetic coercivity. This is called “patterned media”. For developing hard disk drives using these methods, we developed a simulator that analyzes the optical intensity distribution from the optical head for laser-assisted recording and the temperature profile on the patterned media. The simulator calculates the optical model using the finite-difference time-domain (FDTD) method. The thermal analysis of the three-dimensional model allows fast calculations using the alternating direction implicit (ADI) method. The heat source distribution data for thermal analysis is calculated in order to use the results of optical analysis. The optical and thermal analyses of the laser-assisted recording model were investigated with the simulator.     

组合式片状激光放大器钕玻璃片参数的优化设计

 运用随时间变化的氙灯辐射光谱模型,建立了组合式钕玻璃片状激光放大器动态增益特性的模拟程序,实现了从氙灯放电到引出激光的全过程动态模拟。研究了钕玻璃片的两个重要参数厚度和掺杂浓度对增益性能的影响。在相同的泵浦强度下,储能通量由片厚度与掺杂浓度的乘积N₀D决定,在N₀D相同时得到相同的小信号增益。当N₀D比较小时,N₀D增加1倍时储能通量增加1.25倍,相应的单片放大器增益提高5.5%,对于7片长的放大器链,总的小信号增益将提高45%;当N₀D比较大时,储能通量趋于饱和。     

量子盘中的三阶非线性光学极化率

利用密度矩阵方法讨论了量子盘中的三阶非线性光学极化率,导出了近共振条件下的三次揩波的解析表达式,并以GaAs量子盘为例进行了具体的计算。结果表明,GaAs量子盘中的三阶非线性光学极化率要比GaAs量子阱的大几十倍。而且,选取适当的参量,可在吸收系数相对较小的情况下获得较大的折射率。     

基于液晶调制器调制的实时测温系统

分析了一种基于基尔霍夫定律的钽酸锂(LiTaO3)热释电探测器作为接收元件的实时测温系统中,机械式调制盘对测量精度影响,提出了改变机械式调制盘对测量精度的影响的方法;介绍了液晶调制器的结构、对辐射调制的原理以及在使用过程中的优点。设计了利用液晶调制器替代机械调制器的钽酸锂热释电实时测温系统。结果表明,利用液晶调制器改进后的测温系统在给定的温度范围中,测量精度均有明显的改善,符合测量要求。     

The spreading behaviour of perfluoropolyether droplets on solid surfaces

The spread of perfluoropolyether （PFPE） droplets on solid surfaces has been measured from the top-down view through a microscope system. Effects of substrates, molecular weight and end-group functionality on spreading of the PFPE droplets have been studied experimentally and the results were compared with those by molecular dynamics （MD） simulations. Silicon wafer and diamond-like carbon （DLC） substrates were used to study the effect of substrates on spreading. Two types of PFPE, Z-dol and Z-tetraol, with the same chain structure and various molecular weights （2000 and 4000 g/mol） were employed in experiments. Effect of molecular weight has been investigated through comparing the spreading of Z-dol 2000 and Z-dol 4000, and it is found that the increase of molecular weight will decrease the mobility of PFPE. Comparison between spreading of Z-dol and Z-tetraol of the same molecular weight proved that functional end group plays a significant role on the spreading of PFPE, which confirmed the MD simulation results.