Enantiomeric Cyclic Peptides with Different Caco‐2 Permeability Suggest Carrier‐Mediated Transport

Recently, oral absorption of cyclic hexapeptides was improved by N‐methylation of their backbone amides. However, the number and position of N‐methylations or of solvent exposed NHs did not correlate to intestinal permeability, measured in a Caco‐2 model. In this study, we investigate enantiomeric pairs of three polar and two lipophilic peptides to demonstrate the participation of carrier‐mediated transporters. As expected, all the enantiomeric peptides exhibited identical lipophilicity (logD_7.4) and passive transcellular permeability determined by the parallel artificial membrane permeability assay (PAMPA). However, the enantiomeric polar peptides exhibited different Caco‐2 permeability (P_app) in both directions a–b and b–a. The same trend was observed for one of the lipophilic peptide, whereas the second lipophilic enantiomer pair showed identical Caco‐2 permeability (within the errors). These findings provide the first evidence for the involvement of carrier‐mediated transport for peptides, especially for those of polar nature.     

Effects of Moisture and Stresses on the Structure and Properties of Polyester Resin

The results of a complex study of structural changes in a cured Norpol 440 polyester resin under the action of damp environment and mechanical loading are presented. A considerable effect of absorbed moisture on the structure and some characteristics of the material is revealed by using thermophysical methods and X-ray diffractometry. The joint effect of moisture and mechanical stress is estimated by investigating the creep in stationary and nonstationary moisture conditions. The anisotropy of the material structure formed during creep is evaluated from the results of dilatometric measurements. It is found that the degree of anisotropy of the material after creep accompanied by moisture sorption is higher than that after creep in the conditions of moisture equilibrium with atmosphere. It is established that the aftercure and relaxation of the residual creep deformation come to an end at heating to 80-85°C. At a further rise in temperature and repeated heating, changes in the material structure are not observed.     

FeCoB-SiO2磁性纳米颗粒膜的微波电磁特性

采用交替沉积磁控溅射工艺制备了超薄多层的FeCoB SiO2 磁性纳米颗粒膜 .利用x射线衍射仪、扫描探针显微镜、透射电子显微镜分析了薄膜的微结构和形貌特征 .采用振动样品磁强计、四探针法、微波矢量分析仪及谐振腔法测量薄膜试样的磁电性能和微波复磁导率 .重点对SiO2 介质相含量、薄膜微结构对电磁性能产生重要影响的机理做了分析和探讨 .结果表明 :这类FeCoB SiO2 磁性纳米颗粒膜具有良好的软磁性能和高频电磁性能 ,2GHz时的磁导率 μ′高于 70 ,可以应用于高频微磁器件或微波吸收材料的设计     

Homogenization of two-phase flow: high contrast of phase permeabilityHomogénéisation d'écoulement diphasique : grand contraste de perméabilité d'une phase

The steady-state two-phase flow non-linear equation is considered in the case when one of phases has low effective permeability in some periodic set, while on the complementary set it is high; the second phase has no contrast of permeabilities in different zones. A homogenization procedure gives the homogenized model with macroscopic effective permeability of the second phase depending on the gradient and on the second order derivatives of the macroscopic pressure of the first phase. This effect cannot be obtained by classical (one small parameter) homogenization. To cite this article: G.P. Panasenko, G. Virnovsky, C. R. Mecanique 331 (2003).     

铸膜液溶剂体系的物理参数与BCA不对称膜的透气性

铸膜液的溶剂体系（溶剂和非溶剂）对不对称膜形态的形成有重要作用。为了探索溶剂和透气性间的关系，本文考虑到了制备ＢＣＡ梯度密度不对称膜的各种溶剂的一系列物理参数，得到了一些定性结果，并指出了更全面、明确、解释两者关系的研究方向。     

Influence of moisture on the viscoelastic relaxations in long aliphatic chain contained semiaromatic polyamide, (PA9‐T) fiber

The effect of moisture on the mechanical relaxation processes of semiaromatic semicrystalline polyamides synthesized by a long‐chain aliphatic diamine and terephthalic acid was investigated by dynamic viscoelastic analysis (DVA) and differential scanning calorimetry (DSC). Moreover, the implication of moisture with the amorphous and crystalline domains was also examined by temperature‐dependent wide‐angle X‐ray diffraction and Fourier transform infrared spectra. The characteristics of the relaxations such as α, β, γ, and the pronounced peak shoulder appeared at 25–100 °C in DVA tan δ curves were found to be strongly susceptible to the presence of moisture. With moisture evaporation, the peak shoulder of 25–100 °C and the β‐relaxation disappeared. The former is anticipated to originate from to the side group motion of hydrogen‐bonded water, whereas the later one is from the motions of the amide–water complex units. With the disappearance of the β‐relaxation, the γ‐relaxation appeared simultaneously in much lower temperatures and ultimately coupled with the δ‐relaxation. The γ‐relaxation is attributed to be associated with the molecular motion of the amide group and δ‐relaxation with for the motion of the methylene units. The existence of two types of water was identified in the polymer, namely, tightly bound and loosely bound. The tightly bound water is believed to be directly connected by hydrogen bonding with the strong polar groups and the loosely bound water weakly links with those connected water making hydrogen bridges. The moisture acts as a plasticizer in the polymer matrix, which causes quite a large depression in its glass transition temperature (T_g). WAXD and FTIR studies corroborated the existence of water solely in amorphous regions, i.e., no rapport of water with the crystalline parts. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 2878–2891, 2003     

Permeability,permselectivity, and penetrant‐induced plasticization in fluorinated polyimides studied by positron lifetime measurements

The ortho‐positronium (o‐Ps) lifetime τ₃ and its intensity I₃ in various fluorinated polyimides were determined by the positron annihilation technique and were studied with the spin–lattice relaxation time T₁ and the propylene permeability, solubility, diffusivity, and permselectivity for propylene/propane in them. τ₃, I₃, and the distribution of τ₃ changed when the bulky moieties in the polyimides were changed. The polyimides, having both large τ₃ and I₃ values, exhibited a short T₁ and a high permeability with a low permselectivity. The propylene permeability and diffusivity were exponentially correlated with the product of I₃ and the average free‐volume hole size estimated from τ₃. In highly plasticized states induced by the sorption of propylene, the permeability increased with the propylene pressure in excellent agreement with the change in the free‐volume hole properties probed by o‐Ps. The large and broad distribution of the free‐volume holes and increased local chain mobility for the 2,2‐bis(3,4‐decarboxyphenyl) hexafluoropropane dianhydride‐based polyimides are thought to be important physical properties for promoting penetrant‐induced plasticization. These results suggest that o‐Ps is a powerful probe of not only the free‐volume holes but also the corresponding permeation mechanism and penetrant‐induced plasticization phenomenon. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 41: 308–318, 2003     

Surface characterization and barrier properties of plasma‐modified polyethersulfone/layered silicate nanocomposites

This study describes the preparation of polyethersulfone (PES)/layered silicate nanocomposites (PLSNs) by mixing PES polymer chain into organically‐modified layered silicate in 1‐methyl‐2‐pyrrolidinone (NMP) solution. Both X‐ray diffraction data and transmission electron microscopy images of PLSNs indicate that the silicate layers were almost exfoliated and randomly distributed into the PES matrix. The mechanical and barrier properties of PLSNs show remarkable enhancement in the storage modulus and water/oxygen permeability when compared with that of neat PES matrix. Surfaces modification of PES and PLSN films with various treated times, system pressures, and radio frequency (RF) powers were performed using a mixture of oxygen (O₂) and nitrogen (N₂) plasmas. The topographical and physical properties of plasma‐modified PES and PLSN surfaces were investigated using scanning probe microscopy (SPM), contact‐angle measurements, and X‐ray photoelectron spectroscopy (XPS). These results indicate that the surface roughness of PLSNs with the same condition of plasma modification is lower than that of neat PES matrix and is probably due to the increase of stiffness with the presence of inorganic layered silicates in PES matrix. The surface properties of the PES and PLSNs are also changed from hydrophobic to hydrophilic. The XPS spectra suggest that the exposure of the PES and PLSNs to the plasmas led to the combination of etching reactions of polymer surface initiated by plasma and the following addition reactions of new oxygen‐ and nitrogen‐containing functional groups onto polymer surfaces to change their surface properties. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3185–3194, 2006     

Computation of moisture and temperature profiles in soil—The coupled model

The coupled model has been developed in this study for moisture transport and beat exchange in soil. The model is driven by atmospheric conditions measured in a field. The concept that soil has a surface resistance to evaporation is introduced in order to relate the evaporation from surface with the vapour flux in air. With the use of this concept, the simulation results agree quite well with the measured data.