Zone specificity in low energy electron stimulated desorption of Cl from reconstructed Si(1 1 1)-7 × 7:Cl surfaces

Diffraction in electron stimulated desorption has revealed a propensity for Cl⁺ desorption from rest atom vs. adatom areas and unfaulted vs. faulted zones of Cl-terminated Si(1 1 1)-(7 × 7) surfaces. We associate the 15 eV ± 1 eV threshold with ionization of Si-Cl σ-bonding surface states and formation of screened two-hole states with Si 3s character. Similar specificity is observed from A and B reconstructions. This can be due to reduced screening in unfaulted regions and increased hole localization in Si back-bonds within faulted regions.     

Formation and hydrogenation of p(2 × 2)-N on Pt(1 1 1)

The formation of a well-ordered p(2 × 2) overlayer of atomic nitrogen on the Pt(1 1 1) surface and its reaction with hydrogen were characterized with reflection absorption infrared spectroscopy (RAIRS), temperature programmed desorption (TPD), low energy electron diffraction (LEED), Auger electron spectroscopy (AES), and X-ray photoelectron spectroscopy (XPS). The p(2 × 2)-N overlayer is formed by exposure of ammonia to a surface at 85 K that is covered with 0.44 monolayer (ML) of molecular oxygen and then heating to 400 K. The reaction between ammonia and oxygen produces water, which desorbs below 400 K. The only desorption product observed above 400 K is molecular nitrogen, which has a peak desorption temperature of 453 K. The absence of oxygen after the 400 K anneal is confirmed with AES. Although atomic nitrogen can also be produced on the surface through the reaction of ammonia with an atomic, rather than molecular, oxygen overlayer at a saturation coverage of 0.25 ML, the yield of surface nitrogen is significantly less, as indicated by the N₂ TPD peak area. Atomic nitrogen readily reacts with hydrogen to produce the NH species, which is characterized with RAIRS by an intense and narrow (FWHM ∼ 4 cm⁻¹) peak at 3322 cm⁻¹. The areas of the H₂ TPD peak associated with NH dissociation and the XPS N 1s peak associated with the NH species indicate that not all of the surface N atoms can be converted to NH by the methods used here.     

Correlation between the Mechanical Properties and the Amount of Desorbed Water for Composites Based on Low-Density Polyethylene and Linen Yarn Production Waste

The effect of the amount of desorbed water on the mechanical properties of composites based on low-density polyethylene and linen yarn production waste (LW) is analyzed by statistical methods. It is shown that the amount of absorbed water decreases during the desorption process at room temperature both for specimens modified and unmodified with diphenylmethane diisocyanate (DIC.) The most sensitive to the action of water is the elastic modulus, which decreases considerably under the effect of water and is fully restored in the desorption process. The tensile strain also increases with the amount of absorbed water. It is found that the elastic modulus of the unmodified composite correlates linearly with the amount of desorbed water. Between the amount of desorbed water and the tensile strain, as well the specific work of deformation, a negative linear correlation is revealed. After water desorption, all strength and deformation characteristics of both the modified and unmodified composites are fully recovered.__________Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 4, pp. 515–524, July–August, 2005.     

Smoothing estimation of rate function for recurrent event data with informative censoring

This paper proposes kernel estimation of the occurrence rate function for recurrent event data with informative censoring. An informative censoring model is considered with assumptions made on the joint distribution of the recurrent event process and the censoring time without modeling the censoring distribution. Under the validity of the informative censoring model, we also show that an estimator based on the assumption of independent censoring becomes inappropriate and is generally asymptotically biased. To investigate the asymptotic properties of the proposed estimator, the explicit form of its asymptotic mean squared risk and the asymptotic normality are derived. Meanwhile, the empirical consistent smoothing estimator for the variance function of the estimator is suggested. The performance of the estimators are also studied through Monte Carlo simulations. An epidemiological example of intravenous drug user data is used to show the influence of informative censoring in the estimation of the occurrence rate functions for inpatient cares over time.     

Effects of aldehyde or dipyrromethane substituents on the reaction course leading to meso-substituted porphyrins

To better understand the effects of diverse substituents on reactions leading to porphyrins, pyrrole+aldehyde condensations and related reactions of dipyrromethanes were examined. The course of pyrrole+aldehyde condensations was investigated by monitoring the yield of porphyrin (by UV-Vis spectroscopy), reaction of aldehyde (by TLC), and changes in the composition of oligomers (by laser desorption mass spectrometry). Reaction reversibility was examined via exchange experiments. Reversibility of reactions leading to porphyrin was further probed with studies of dipyrromethanes. The reaction course was found to depend on the nature of the substituent and the acid catalyst. Alkyl or electron-donating substituents displayed levels of reversibility (exchange/scrambling) on par or greater than that of the phenyl substituent, whereas electron-withdrawing or sterically bulky substituents exhibited little to no reversibility. The results obtained provide insight into the electronic and steric effects of different substituents and should facilitate the design of synthetic plans for preparing porphyrinic macrocycles.     

Photorefractive Four-Wave Mixing Switches Utilizing Pockels Effect -Longitudinal and Lateral Switches-

We carried out detailed calculations for photorefractive wave-mixing switches based on one of three crystals with high electro-optic coefficients, namely, BaTiO₃, Strontium Barium Niobate (SBN (0.75)), and Potasium Sodium Strontium Barium Niobate (KNSBN). A comparison of results for the three crystals shows that a 0_-cut BaTiO³ crystal is suitable for a longitudinal switch and requires a voltage of about 80 for a 2-mm-thick crystal to induce sufficient phase mismatch. The electrodes must be transparent for the incident and diffracted beams. A 45_-cut SBN (0.75) crystal, however, is suitable for a lateral switch and requires a voltage of about 150 for a 1-mm-wide crystal. The electrodes do not need to be transparent.     

不连续双斜向内肋管纵向涡流动显示

利用染色线流动显示方法,显示并分析了不同雷诺数下不连续双斜向内肋管管内流场。流动显示实验结果表明不连续双斜向内肋管管内存在较强的贴近壁面的纵向涡,纵向涡沿流向可持续约一倍管径距离,并且纵向涡的强度随雷诺数的增加而增强。     

空间电荷主导电子束的纵向聚焦设计

在空间电荷主导电子束研究中,纵向聚焦非常重要,在输运过程中由于强空间电荷力的影响,束团将很快变长并崩溃,马里兰大学的电子环设计用于方形束团和抛物线形束团的研究,环中需要用三个感应腔对束团进行纵向聚焦.文中首先介绍了方形束团和抛物线形束团的纵向束流动力学,推导了两种束团纵向聚焦所需要的5MHz重复率高压脉冲波形,并给出了实现纵向聚焦的感应腔设计及其特殊要求.     

Deformation of styrene—divinylbenzene copolymers and hypercrosslinked polystyrenes during solvent adsorption and desorption

An automated procedure was developed for monitoring fast changes in the size of spherical samples of polymers during their contact with a solvent or drying. The kinetics of bulk deformation in these processes was studied for a series of cross-linked polymers, viz., gel-type and porous styrene—divinylbenzene copolymers and poly(divinylbenzenes), and hypercrosslinked polystyrenes. Gel, macroporous, and hypercrosslinked polystyrenes are substantially different in the rate, mechanism, and degree of swelling, which is associated with the principal differences in their physical structures. An unusual effect of a sharp decrease followed by a temporary increase in the volume of porous polystyrene and poly(divinylbenzene) materials were observed during desorption (evaporation) of organic solvents. Water desorption is accompanied by an excessive bulk compression of porous granules giving rise to negative deformations, which gradually relax to the state equilibrium for the dry polymer. The results of dynamic desorption porometry (for water desorption) are indicative of a bimodal size distribution of micropores in hypercrosslinked polystyrene. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 467–476, March, 2007.     

Electron-stimulated desorption of D (H) from condensed D2O (H2O) films

The electron-stimulated desorption (ESD) of D⁻ and H⁻ ions from condensed D₂O and H₂O films is investigated. Three low-energy peaks are observed in the ESD anion yield, which are identified as arising from excitation of ²B₁, ²A₁ and ²B₂ dissociative electron attachment (DEA) resonances. Additional structure is observed between 18 and 32 eV, which may be due to ion pair formation or to DEA resonances involving the 2a₁ orbital. The ion yield resulting from excitation of the ²B₁ resonance increases as the film is heated. We attribute the increase in the ion yield to thermally induced hydrogen bond breaking near the surface, which enhances the lifetimes of the excited states that lead to desorption.