COMPACT COUPLED LINEAR TAPERED LINE BANDPASS FILTER WITH TWO TRANSMISSION ZEROS

A new compact bandpass filter composed of two coupled linear tapered line resonators (LTLRs) is designed. The two resonators are arranged in different layers. The filter has two transmission zeros on both sides of the passband. It has small size and steep response below its passband. It is also shown that this filter has 0.6 dB low insertion loss at the centre frequency and 10.5% 3dB bandwidth. This work was supported by the Development Foundation of Shanghai Educational Committee (217608) and Shanghai Leading Academic Discipline Project (T0102).     

叠层连续开口圆柱壳的精确解

抛弃任何有关位移和应力模式的假设，引入δ-函数，对正变异性连续开口圆柱壳建立状态方程．给出薄的、中厚的和强厚的叠层连续开口圆柱壳静力问题的统一的精确解．数值结果和SAPS解进行了对比．     

Pitch-Based Laminated Carbon Formed by Pressure Driving at Low Temperature as High-Capacity Anodes for Lithium Energy Storage Systems

Pitch has been used to prepare electrodes by high-temperature heat treatments for supercapacitors, lithium-ion batteries, on account of its rich aromatic ring structure. Here, the toluene-soluble component of pitch is used to prepare a kind of laminated carbon. This was realized by a template-free synthesis at low temperature with the addition of pressure. The toluene-soluble component has a small molecular weight, which makes the thermal deformation ability stronger and then enhances the orientation of the carbon layer with the help of pressure. The prepared anode exhibits a splendid electrochemical performance compared with the traditional graphite anode. A high stable capacity of approximately 550 mAh g⁻¹ at 50 mA g⁻¹, which is much higher than graphite (372 mAh g⁻¹), is obtained. Also, when the current density is up to 2 A g⁻¹, the capacity is about 150 mAh g⁻¹. Surprisingly, it also delivers a superior cycling performance. And when used as the anode/cathode electrode for lithium-ion capacitors, a high energy density can be obtained. The present work offers an opportunity to utilize the pitch source in lithium energy storage with promising cycle life, high energy/power density, and low cost.     

Influence of the molding angle on tensile properties of FDM parts with orthogonal layering

Fused deposition molding (FDM) is one of the most widely used three‐dimensional (3D) printing technologies. This paper explores the influence of the forming angle on the tensile properties of FDM specimens. Orthogonal layering details were studied through experiments, theory, and finite element simulations. The stiffness and strength of the specimens were analyzed using the classical laminated plate theory and the Tsai–Wu failure criterion. The experimental process was simulated using finite element simulations. Results show that it is feasible to predict the stiffness and strength of FDM specimens using classical laminated plate theory and the Tsai–Wu failure criterion. A molding angle of 45° leads to specimens with maximized tensile properties. Numerical simulations show that changing the molding angle changes the internal stress and deformation fields inside samples, leading to FDM samples with different mechanical properties due to the orthogonal layers at different molding angles.     

复合材料层合板冲击损伤及剩余强度分析方法

应用三维逐渐累积损伤理论和分析技术对层合板的冲击及冲击后含损伤的层合板在拉伸载荷下损伤扩展的全过程进行分析.分析中取消了以往研究者对冲击后层合板损伤状态所做的人为假设,将冲击后层合板的实际损伤状态直接用于剩余拉伸强度研究.通过与已有文献结果比较,验证了方法的正确性.     

板结构计算模型的新发展

现代复合材料层合板具有高强和轻型的突出优点,从而在军工和民用等诸多领域发挥着重要作用。这种板结构的特点是随着纤维走向的不同,层间材料的物理-力学特性发生剧烈变化。沿板厚方向变形的梯度比较陡峭,并在层间结合面处发生强不连续,呈现zig-zag （锯齿状）现象。这导致横向剪应变在板的静态和动态响应中发生重要作用,不计横向变形的经典组合板计算模型CLPT难以适应现代多层板计算分析的需要。考虑横向剪切变形影响的板的计算模型得到重视和发展。需要指出,现有各种考虑剪切变形影响的计算模型虽然有了很大的发展,但在全面和准确性上仍然存在一定的不足,难以适应现代多层组合板横向力和物理性能多变的情况。模型预测的沿板厚方向位移和应力的变化规律难以通过严格的检验。本文提出的以比例边界有限元为基础的正交各向异性板的数值计算模型,同时可适用于各种薄板与厚板的分析,对现代复合材料层合板的分析具有特殊的优越性。所得到的板的位移、正应力和剪应力沿板厚方向的变化,与三维弹性理论的标准解高度吻合。数值算例进一步表明,随着层间纤维走向的变化,板内位移场和应力场沿板厚方向剧烈变化所呈现的锯齿现象均可以精准地进行模拟。据此,本文建议方法对现代板分析的广泛适应性和高度准确性得到了充分论证。     

基于高阶位移模式的压电层合板动力有限元模型

建立了含压电片层合板的有限元动力学模型。以位于压电层上下表面处的电场强度和层间电压为未知量,给出了三次函数的电势分布模式,采用Reddy的高阶剪切理论描述板的位移场,假设板厚度方向的正应力为零给出了减缩的本构方程,采用有限元方法,基于Hamilton原理导出结构的动力学方程,然后用静态缩聚的方法压缩掉电场自由度和次要的位移自由度。最后用四边形矩形单元求解了一对称铺层和非对称铺层悬臂板的固有频率,并与ANSYS结果对比验证了本文模型的精确性。     

Nonaxisymmetric thermal stress state of laminated rotational bodies of orthotropic materials under nonisothermic loading

A procedure for numerical investigation of nonaxisymmetric temperature fields and the elastic stress-strain state of laminated rotational bodies of cylindrically and rectilinearly orthotropic materials under nonisothermal loading is proposed. The deformation of orthotropic materials is described by the equations of anisotropic elasticity theory. The equations of state are written in the form of Hookes law for homogeneous materials, with additional terms which take into account the thermal deformation, changes in the mechanical properties of materials in the circumferential direction, and their dependence on temperature. A semianalytic finite-element method in combination with the method of successive approximations is used. An algorithm for numerical solution of the corresponding nonlinear boundary problem is elaborated, which is realized as a package of applied FORTRAN programs. Some numerical results are presented.Translated from Mekhanika Kompozitnykh Materialov, Vol. 40, No. 6, pp. 731–752, November–December, 2004.     

On two models in the three-dimensional theory of stability of composites

A comparative analysis is made of the infinite-fiber and finite-fiber models in the three-dimensional theory of stability of composites. The results analyzed have been obtained using the three-dimensional linearized theory of stability of deformable bodies. A historical sketch is given of the theory of stability for and approaches used in the mechanics of laminated and fibrous composite materials Translated from Prikladnaya Mekhanika, Vol. 44, No. 8, pp. 3–31, August 2008.     

复合材料迭层板弯曲分步分析法

本文提出了一种用于分析复合材料迭层板弯曲的新方法。首先利用经典理论进行初步分析,之后,据所得横向剪力,设定横向剪切应变,再进一步分析。本文方法基本未知函数少,基本方程易解,计算精度较高。