Isothermal crystallization kinetics of poly(3‐hydroxybutyrate)/layered double hydroxide nanocomposites

Poly(3‐hydroxybutyrate) (PHB)/layered double hydroxides (LDHs) nanocomposites were prepared by mixing PHB and poly(ethylene glycol) phosphonates (PEOPAs)‐modified LDH (PMLDH) in chloroform solution. Both X‐ray diffraction data and TEM micrographs of PHB/PMLDH nanocomposites indicate that the PMLDHs are randomly dispersed and exfoliated into the PHB matrix. In this study, the effect of PMLDH on the isothermal crystallization behavior of PHB was investigated using a differential scanning calorimeter (DSC) and polarized optical microscopy. Isothermal crystallization results of PHB/PMLDH nanocomposites show that the addition of 2 wt % PMLDH into PHB induced more heterogeneous nucleation in the crystallization significantly increasing the crystallization rate and reducing their activation energy. By adding more PMLDH into the PHB probably causes more steric hindrance of the diffusion of PHB, reducing the transportation ability of polymer chains during crystallization, thus increasing the activation energy. The correlation among crystallization kinetics, melting behavior and crystalline structure of PHB/PMLDH nanocomposites can also be discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 3337–3347, 2006     

Front roughening in three-dimensional imbibition

We investigate the structure and dynamics of the interface between two immiscible liquids in a three-dimensional disordered porous medium. We apply a phase-field model that includes explicitly disorder and discuss both spontaneous and forced imbibition. The structure of the interface is dominated by a length scale ξ_× which arises from liquid conservation. We further show that disorder in the capillary and permeability act on different length scales and give rise to different scalings and structures of the interface properties. We conclude with a range of applications.     

存在滑移时两圆球间的幂律流体挤压流动

基于Reynolds润滑理论分析了壁面滑移对任意圆球颗粒间幂律流体的挤压流动的影响。研究表明有壁面滑移时挤压流动的粘性力可通过引进本文定义的滑移修正系数分离出无滑移解。推导出的挤压力滑移修正系数是一积分表达式，依赖于滑移参数、幂律指数、球间隙和积分上限。一般地壁面滑移导致粘性力减小，粘性力的减小量随幂律指数的增大而增大，表明壁面滑移对剪切增稠流变材料有更大的影响；粘性力的减小量还随着滑移参数的增大而增加，而这恰与假设相符合；粘性力的减小量又随球间隙减小或积分上限的增大（从液桥情况到完全浸渍）而减小直到趋于常数，这一特性在离散元模拟时可以有效地减少计算量。     

Thermal and structure analysis of FeSO4·H2O-BaO2 mixtures

Investigations on the thermal decomposition of FeSO₄·H₂O-BaO₂ mixtures were carried out under isothermal conditions by using simultaneously solid electrolyte cell (EMF-method). Evoked interactions producing oxygen in the temperature range 553-673 K were established by means of a solid electrolyte oxygen analyzer. Based on Mössbauer spectroscopy data and X-ray analysis it was proved that these reactions were associated with the release of oxygen from barium peroxide, oxidation of ferrosulphate-monohydrate to FeOHSO₄, and formation of barium ferrites such as BaFe₂O₄ and BaFe₁₂O₁₉.     

Development of a new analytical method for the evaluation of hazards from slow decomposition of waste streams and process solutions

A wide variety of liquid streams are generated as part of the process research and development effort. Frequently these streams are drummed off, either as intermediates that must be held for processing or as wastes that must be sent off-site for disposal. Because of the long times and low concentrations often involved, current thermoanalytical techniques were inadequate to detect the potential of streams to generate gas. A custom-made apparatus, the gas evolution test cell (GETC), was developed in the Merck Research Laboratories to measure the gas generation potential of various streams under precisely defined conditions, is the key innovation for the development of a quantitative gas-generation test method.     

环氧乙烷和环氧丙烷共聚体系的等温结晶和熔融

环氧乙烷（ＥＯ）和环氧丙烷（ＰＯ）共聚体系的等温结晶前期符合Ａｖｒａｍｉ方程。ＰＯ组分含量增加，Ａｖｒａｍｉ指数ｎ值由１．８到２．４，体系的结晶生长速率与共聚体系的组成和结晶度有关，ＥＯ／ＰＯ共聚体系的平衡熔点随ＰＯ含量的增加而降低。随Ｔｃ增大，△Ｈｍ与△Ｓｍ呈线性降低。     

A novel approach to study the isothermal behaviour of substances after 0.01–1 s from the chemical process initiation

New modifications of a contact heater are suggested for investigating thermal decomposition processes, as well as for determining kinetic characteristics of substances under conditions of intense heating to a fixed constant temperature.

---

Zusammenfassung Zur Untersuchung von thermischen Zersetzungsprozessen und der Bestimmung der Reaktionskinetik von Substanzen bei intensivem Erhitzen auf vorgegebene konstante Temperaturen wird eine neue Abart von Kontakterhitzern beschrieben.

     

尼龙66/蒙脱土复合材料结晶行为的研究

在密炼机中采用熔融共混法制备蒙脱土重量分数为 2 5 %、4 5 %的尼龙 6 6 /蒙脱土复合材料 .通过DSC法对非等温结晶行为及在 2 2 8～ 2 4 0℃范围内的等温结晶行为进行研究 ,并与纯尼龙 6 6进行比较 .从其等温和非等温结晶行为的研究表明 ,蒙脱土起成核剂的作用 ,它的填入使尼龙 6 6结晶速率提高 ,但填料与基体间的相互作用使其链段运动困难 ,结晶活化能提高 ;在研究的填料含量变化范围内 ,结晶行为变化不大 ,并且找到该复合材料在 2 2 8～ 2 34℃范围结晶对温度的不敏感区 ;对非等温结晶过程分析 ,刘结平 莫志深方程是适用的 ,而Ozawa方程则是不适用的 .     

Growth transition and morphology change in polypropylene

The growth rate of isotactic polypropylene is deduced from microscopic observations during isothermal crystallizations. A change in the growth regime is observed at 138 C and interpreted as a Regime III Regime II transition, according to Hoffman's kinetic theory of polymer crystallization. A Regime II Regime I transition is also theoretically predicted at 155 C, i. e. at a temperature outside the investigated temperature range. The Regime III Regime II transition is related to the positive to negative change in the spherulite birefringence, which is generally attributed to a change in the organization of crystalline lamellae: quadritic arrays of intercrossing lamellae atT _c < 138 C (Regime III) and preferentially radiating lamellae atT _c > 138 C (Regime II). It is suggested that such a morphological change could be interpreted using the concept of non-adjacent re-entry introduced in Hoffman's kinetic theory. This interpretation could also explain the interspherulitic ruptures observed in negative spherulites.