Bounds to optimal burn‐in and optimal work size

Burn‐in is a widely used method to improve the quality of products or systems after they have been produced. In this paper, we consider the problem of determining the optimal burn‐in time and optimal work size maximizing the long‐run average amount of work saved per time unit in the computer applications. Assuming that the underlying lifetime distribution of the computer has an initially decreasing or/and eventually increasing failure rate function, an upper bound for the optimal burn‐in time is derived for each fixed work size and a uniform (with respect to the burn‐in time) upper bound for the optimal work size is also obtained. Furthermore, it is shown that a non‐trivial lower bound for the optimal burn‐in time can be derived if the underlying lifetime distribution has a large initial failure rate. Copyright © 2005 John Wiley & Sons, Ltd.     

点支撑预应力中厚矩形板的弯曲

基于Reissner-Mindlin一阶剪切变形板理论，讨论在预加面内机械荷载或温度场作用下，点支撑中厚矩形板的弯曲问题。温度场假定沿板表面为均布，沿板厚方向为线性分布的。利用考虑剪切变形影响的Timoshenko梁函数，采用Rayleigh-Ritz法给出不同边界条件下点支撑中厚板在横向荷载作用下的挠度和弯矩分布。结果表明，均匀温度场与预加面内压力将使板的挠度和弯矩增加。支撑点位置的变化、边界约束条件和横向剪切变形效应都对板的内力大小和分布有显著影响。     

单轴〈111〉应力硅价带结构计算

基于k·p微扰法计算了单轴〈111〉应力作用下硅的价带结构, 并与未受应力时体硅的价带结构进行了比较. 给出了单轴〈111〉应力作用下硅价带顶处能级的移动、分裂以及空穴有效质量的变化情况. 计算所得未受应力作用时硅价带顶处重空穴带、轻空穴带有效质量与相关文献报道体硅有效质量结果一致. 拓展了单轴应力硅器件导电沟道应力与晶向的选择范围,给出的硅价带顶处重空穴带、轻空穴带能级间的分裂值和有效质量随应力的变化关系可为单轴〈111〉应力硅其他物理参数的计算提供参考. 关键词： 单轴应力硅 k·p法')" href="#">k·p法 价带结构     

主动抛光盘面形测试技术的研究

主动抛光盘技术是新发展起来的一种能够根据需要将抛光盘面实时地主动变形成离轴非球面来磨制深非球度高精度天文镜面的磨制技术。简单介绍了抛光盘变形控制结构和面形检测机构，对深非球面度面形变形进行了精度分析，探讨了主动抛光盘的动态响应和校正，并对抛光盘的改造提出了一些建议。     

Science and technology of stressed liquid crystals: display and non-display applications

ABSTRACT

Stressed liquid crystals (SLCs) have emerged as promising tunable electro-optical materials more than a decade ago. They are optically transparent and are characterized by a giant phase modulation of the incident light (Nπ, N >> 1), fast (millisecond and shorter) electro-optical response, and a relatively low driving voltage (～1 V/μm). Surprisingly, despite their advanced electro-optical performance, these new materials did not receive due attention in the research community. One possible reason of such an inadequate interest in SLCs is the lack of the well-documented procedure describing how to actually produce these materials. This paper is aimed at the development of such a step-by-step practical guide suitable for experimentalist and engineers. The proposed technology is applied to produce and characterize SLCs. In addition, some applications of the materials are briefly discussed and a broader overview of their possible use is outlined.     

应变液晶的负压光效应和反式压光效应

介绍聚合物分散液晶和应变液晶概念,给出聚合物分散液晶调光玻璃的"正压光效应"、"负压光效应"和"反式压光效应"三种效应定义.实验制备出负压光效应和反式压光效应新型应变调光玻璃样品,测试样品散射态雾度90%以上,半透明态透光率接近30%.用偏光显微术研究压光效应原理,表明对样品施加垂面按压或拉伸的应力诱导作用会引起液晶微滴中液晶分子具有某些特殊排列方式,导致样品光学性质发生显著变化.建立垂面拉伸液晶微滴模型,计算模拟所绘出的图形与偏光显微镜照片独特花样十分相似,进而合理解释了实验现象.应变液晶压光效应研究具有聚合物分散液晶基础研究意义和开发非电控调光玻璃的实际应用价值.     

Undrained shear strength for K0{K}_{0}K0 overconsolidated clays K01)}K0

结合K0超固结土模型、旋转角K0\omegaK0公式、临界状态不排 水条件以及基于SMP的变换应力张量建立了不排水抗剪强度的统一表达 式;采用三轴压缩、三轴拉伸的应力洛德角K0\thetaK0、旋转角K0\omega K0建立了三轴压缩、三轴拉伸条件下的不排水抗剪强度公式;基于临界状态土力学,推导出了 平面应变条件下的应力洛德角K0\thetaK0、旋转角K0\omega K0的表达式,进而得到平面应变条件下的不排水抗剪强度公式. 分别采用三轴压缩、三轴拉伸 和平面应变条件下试验数据对所提出的不排水抗剪强度公式进行验证,预测结果和试验数据 的基本吻合表明了不排水抗剪强度公式的合理性.     

Bioorthogonal Conjugation Directed by a Sugar‐Sorting Pathway for Continual Tracking of Stressed Organelles

Selective and continuous tracking of dynamic organelles is crucial for modern biology. We herein report a ship‐in‐a‐bottle strategy for tagging lysosomes by a strain‐promoted azide–alkyne cycloaddition to couple a pH sensor (RC) with mannose‐6‐carboxylate (M6C) actively transported into lysosomes through cell sorting. In contrast to classical acidotropic sensors, which are prone to dissipate from lysosomes, M6C‐RC formed in situ is stably trapped in lysosomes without resort to lysosomal acidity and exhibits “always‐on” blue fluorescence to pinpoint lysosomes and red‐to‐blue fluorescence ratios indicative of the lysosomal pH value. These advantages enable tracking of stressed lysosomes, and necrosis to be differentiated from apoptosis on the basis of lysosomal pH changes. The cell‐sorting‐mediated bioorthogonal tagging strategy offers a new route to track stressed organelles with disrupted physiological organelle–probe affinity.     

大变形下初始斜交异性本构方程

采用材料主轴法,建立了初始斜交异性材料在变形构形（Euler描述）下的斜交异性本构方程,以及在初始构形（Lagrange描述）下的形式。具体给出了斜交异性线弹性材料方程的显式,它在Lagrange描述下形式简洁,可方便地用于有限元计算。文中指出,在变形构形下是线弹性的材料,在Lagrange描述下其本构方程一般已成为非线性,我们称之为本构转换非线性。这种非线性在实际的有限元计算中还未引起重视。为理论简明,本构方程是对二维给出的。     

Inverse Problems of the Mechanics of Thin-Walled Composite Structures

New formulations and methods for the solution of the inverse problems of thin-walled layered and reinforced shells and plates are discussed. Rational projects with regard for the requirements of nonflexural deformations in layered structural members, the given deformability of particular surfaces, the realization of a strictly momentless state, an equally stressed reinforcement, and the breaking strength of the binder at the interfaces are investigated. A brief review of the known solutions to these problems is given, and solutions to some new problems are described.