Quantitative evaluation of two-dimensional dynamic deformations using digital holography

An optical system for the parallel evaluation of in- and out-of-plane dynamical deformations will be described. A double pulse laser with pulse separation in the microsecond range is used for the investigations. Two separate interferograms of an object under test, in its undeformed and deformed state, are recorded in a few microseconds. The object is illuminated from two different directions and imaged onto a CCD sensor. This produces two sensitivity vectors. The reference beams have different directions in order to produce two directional spatial carriers. The Fourier method is used for quantitative evaluation, and the measurements along different sensitivity vectors are separated in the Fourier domain. The phases of the two interferograms are obtained from the complex amplitudes and the two dimensional deformation is calculated from the phases. Experimental results are presented.     

Assessment of the quality of reedbeds using holomicroscopic moiré

Holographic interferometry is proposed to detect the change in the mechanical responses of reed stems growing in eutrophic, as compared with those in healthy, water bodies. The detection of the difference in behaviour could be a sensitive way to index the degree of eutrophication. An interferometric method based on holomicroscopic moiré is developed and preliminary results obtained are presented.     

A transflective and viewing angle controllable blue-phase liquid crystal display

A polymer-stabilised blue-phase liquid crystal display (PSBP-LCD) with double-side in-plane switching (DS-IPS) electrode structure is proposed. This structure shows the transflective characteristics because the bottom electrodes are made by aluminium material. For transflective displays, it exhibits a well-matched voltage-dependent transmission and reflection curves through designing the width and gap of the top electrodes. When a bias voltage is applied on the top electrodes, it exhibits as a good viewing angle controllable display.     

基于斜向背散射偏振拉曼光谱的{100}c-Si面内应力分析

复杂应力状态下应力分量的解耦分析对半导体的设计和制造具有重要意义。本文开展了方法学研究,首先建立了{100}晶面族单晶硅面内应力分量解耦分析模型,基于该模型,通过改变入射光和散射光的几何构型和偏振构型,可得到单晶硅拉曼频移与应力分量的解析关系。在此基础上,提出了一种利用斜向背散射偏振拉曼光谱在不同倾角、偏振方向和样品旋转角度下开展原位拉曼探测实现应力分量解耦分析的实用技术。本文通过实验验证了该方法的可靠性和适用性。     

紧凑拉剪试样中Ⅰ/Ⅱ复合型穿透裂纹的三维特性分析

进行了Ⅰ/Ⅱ复合型载荷作用下航空结构铝合金CTS试样线弹性的全场三维有限元计算,分析了复合型离面应力约束因子Tz和面内约束T应力的分布特性,研究了厚度和载荷条件对应力各分量及应力三轴性水平Rσ、应变能密度U0的影响以及这些量在实验中观察到的裂纹起裂方向上的特点。结果表明：（1）平面内约束T应力在此种试样形式下为零;（2）复合型裂纹的三维效应区与厚度成正比,为0.4-0.5B,与载荷条件基本无关,但是厚度效应随着载荷角的减小逐渐变小,到II型载荷时基本消失;（3）离面约束因子Tz随着径向和厚度尺寸的增加逐渐减小,但在周向基本不发生变化;（4）最小应变能密度U0min的方位能够表征此种材料三维复合型断裂的裂纹起裂方向。研究结果为建立三维复合型断裂准则提供了理论基础。     

In-plane bistatic backward scattering from seabottom with randomly inhomogeneous sediment and rough interface

1 Introduction Backward scattering of sound due to sediment is the main source of shallow waterreverberation. In order to predict the reverberation or detect sediment properties frommeasured reverberation data, a reasonable in-plane bistatic backward scattering (BBS)model is essential. The scattering can be caused by the roughness of water-sediment in-terface or by inhomogeneities within the volume of sediment. A great deal of researchhas been done on sediment backscattering, most of which h…     

Effects of rubbing angle on maximum transmittance of in-plane switching liquid crystal display

Measurements of the maximum transmittance of an in-plane switching liquid crystal display showed that it increases as rubbing angle is increased from 10 to 20°. This dependence was analysed in terms of the local variation of electric field intensity between electrodes, which in turn makes liquid crystal at various positions between the electrodes rotate to different angles. The local variation of electric field becomes prominent, especially in the case that the distance between the electrodes is much larger than the cell gap or electrode width.     

用白光相对客观散斑技术实测海冰力学性质的初探

本文提出了一种改进的白光散技术，应用此技术测量了单轴压缩下海冰的弹性模量，实测结果与电测法的结果符合程度良好，本文方法操作简单，避免了海水的表面缺隐和浸反射条件差以及表面升华等因素对测量的影响。     

部分相干光云纹干涉法测三维位移场

本文提出了一种用部分相干光可同时获得面内位移和离面位移场的云纹干涉法。该法具有装置简单,无需防震,可用于观场测量等特点。文中论述了此法的基本原理,应用波前干涉理论和付里叶光学理论对变形前后波前的干涉、记录和再观进行了分析,导出了计算公式。实现了透射物体和反射物体表面的面内位移分量(U_0,V_(45),U_(90))和离面位移(w)的全场同时测量,典型实验证明,实验值与计算结果符合较好。     

Spontaneous molecular orientation of polyimides induced by thermal imidization (4): Casting- and melt-induced in-plane orientation

Driving forces of in-plane chain orientation of polyimides (PIs) and their precursors were discussed and the mechanisms were proposed. A polyimide precursor, poly(amic acid) (PAA) derived from 3,3′,4,4′-biphenyltetracarboxylic dianhydride (s-BPDA) with p-phenylenediamine (PDA) showed a certain degree of in-plane orientation in its solution-casting process and clear molecular weight dependence. The results allowed us to propose the casting-induced in-plane orientation mechanism of the rigid PAA chains. The imidization-induced in-plane orientation mechanism was also discussed by investigating how residual solvent content influences the degree of in-plane orientation of resultant PI films. The results suggested that the magnitudes of the PI chain in-plane orientation are dominated by a combined effect of the initial PAA orientation, apparent stretching based on a great thickness decrease, and the molecular mobility during thermal imidization. In a system derived from s-BPDA with 2,2′-bis(trifluoromethyl)benzidine (TFMB), the effect of molecular mobility during thermal imidization was predominant when cured under usual thermal conditions owing to the presence of the trifluoromethyl groups contributing to weakened intermolecular interaction. In s-BPDA/TFMB and s-BPDA/m-TOL systems (m-TOL = m-tolidine), a melt-induced in-plane orientation phenomenon was observed at temperatures corresponding to their T_g’s when the extents of in-plane chain orientation (f values) were monitored as a function of temperature in the stepwise heating process. This behavior is very curious because there are no appreciable dimensional, morphological, and structural changes as some driving forces just above the T_g of s-BPDA/TFMB.