A possible counterexample to well posedness of entropy solutions and to Godunov scheme convergence

A particular case of initial data for the two-dimensional Euler equations is studied numerically. The results show that the Godunov method does not always converge to the physical solution, at least not on feasible grids. Moreover, they suggest that entropy solutions (in the weak entropy inequality sense) are not well posed.

     

93W合金有关力学参量的综合选评

 对93W合金材料进行了超声测量实验，并结合原有的超声测量结果进行了分析比较，提出了可以直接用冲击波速度关系式的三个系数c₀ 、λ和λ′来对钨合金的有关力学参量，如G₀、K₀、G₀′、K₀′等进行综合选评的方法。得到了一组对93W合金较为合理的力学参量推荐值。     

Enhancing the Bolzon–Schrefler–Zienkiewicz Constitutive Model for Partially Saturated Soil

This paper presents an enhanced version of the elasto-plastic model for partially saturated soil first proposed by Bolzon, Schrefler and Zienkiewicz in 1996, “BSZ” model, which uses the effective stress tensor and suction as independent stress variables. It is recalled that the effective stress tensor proposed by Lewis and Schrefler in 1982 is thermodynamically consistent and, compared with other choices of stress tensors, results particularly suitable for partially saturated soil mechanics. A hydraulic constitutive relationship and a hydraulic hysteresis are introduced in the model, to take into account the irreversible deformation during cyclic drying and wetting until structural collapse. For this reason the plastic rate of strain is split into the sum of two components: one depending on the effective stress tensor and the other one on suction. This is the new feature of the BSZ model. This enhanced model is then cast into a thermodynamical framework at macroscopic level and it is shown that it is possible to derive the constitutive law from the Helmholtz free energy and a dissipation function, both for associative and non- associative plasticity. Finally the model predictions have been compared with experimental data for Sion slime, with particular emphasis on the deviatoric part, and model predictions of hysteretic behaviour have been investigated in case of a wetting and drying cycle on compacted betonite–kaolin.     

High-Power CO2 Laser System with Repetition Rate Operation for High Current Multicharged Heavy Ion Generations

Experimental and numerical calculation results devoted to development of an optical system for an ion source based on a repetition rate CO₂ laser are described. The laser chain consists of a master oscillator, gas absorber cells, and a four-pass amplifier. The optical system provides smooth laser pulses with variable duration and high spatial quality that ensures efficiency for plasma heating and ion generation. The parameters of the plasma ion component measured in the CERN laboratory are applied for a lead target illumination.     

Delta and singular delta locus for one‐dimensional systems of conservation laws

This work gives a condition for existence of singular and delta shock wave solutions to Riemann problem for 2×2 systems of conservation laws. For a fixed left‐hand side value of Riemann data, the condition obtained in the paper describes a set of possible right‐hand side values. The procedure is similar to the standard one of finding the Hugoniot locus. Fluxes of the considered systems are globally Lipschitz with respect to one of the dependent variables. The association in a Colombeau‐type algebra is used as a solution concept. Copyright © 2004 John Wiley &Sons, Ltd.     

THERMAL AND THERMO-ELASTIC-PLASTIC RESPONSE OF CERAMIC-METAL FUNCTIONALLY GRADED MATERIALS—THERMAL SHOCK PROBLEM

The thermal and thermo-elastic-plastic response of newly developed ceramic-metalfunctionally graded materials under a thermal shock load is studied.The materials are heated at the ce-ramic surface with a sudden high-intensity heat flux input,and cooled at the metal surface with aflowing liquid nitrogen.Emphasis is placed on two aspects:(1)the influence of the graded composi-tion of the materials on the temperature and stress response;and(2)the optimum design of the gradedcomposition from a unified viewpoint of the heat insulation property and stress relaxation property.Moreover,a comparison between the thermoelastic stress and the thermo-elastic-plastic stress is alsomade to indicate the plasticity effect.     

稀薄气体二维外部柱体绕流特性研究

本文采用直接模拟蒙特卡罗方法对稀薄气体二维外部柱体绕流问题进行了数值模拟。结果表明:外部绕流问题,在特定情况下会产生激波,激波的产生,不仅与气体的稀薄程度有关,还与来流马赫数有关。而气流与壁面之间的换热,随来流马赫数增加而增加,随气体稀薄程度增加而减小。     

水力机械内鲤鱼草鱼的压力损伤模拟试验

通过试验人工模拟水力机械内压力变化过程,测量压力时间变化,观察并解剖分析不同压力变化过程对鲤鱼和草鱼造成损伤的情况。试验发现,负压状态下的压力变化过程会对鱼的生存构成直接威胁,并得到了新型环保水力机械设计中应采用的压力时变导数极限值。     

低进汽压力下超音速两相流升压特性实验研究

本文采用实验方法研究了进汽压力为0.2 MPa以下时,由蒸汽喷嘴、混合腔及相应的阀门和管道组成超音速汽液两相流升压加热装置的运行特性。实验表明在进汽压力为0.1 MPa-0.2 MPa时,超音速汽液两相流升压加热装置都可稳定可靠地运行,且升压效果明显,可满足电力、供暖、轻工等许多行业蒸汽加热的要求。     

神光Ⅱ上柱形黑腔辐射驱动冲击波

利用神光Ⅱ的八路三倍频激光装置，驱动柱形黑腔产生的x 射线作辐射源驱动台阶铝样品产生冲击波，获得了清晰的冲击波图像，通过冲击波过台阶样 品的时间差获得冲击波速度和压力分别为31.2km/s和17.5×10⁵MPa.采用软x射线能谱 仪通过激光注入孔测量的辐射温度与采用冲击波法测量辐射温度的结果一致. 关键词： 冲击波 辐射驱动 辐射温度