Numerical Modeling of Interior Ballistics Processes in Light Gas Guns

An improved procedure for modeling the operation of a light-gas gun is proposed. The motion of working bodies in both the firing chamber and the light-gas chamber is studied within the framework of the mechanics of heterogeneous media. The problem of barrel heating taking into account its melting and removal of thermal ablation products into the medium inside the bore is solved in a coupled formulation. Heat and mass transfer and friction on the barrel surface are calculated using empirical dependences. The deformable piston is considered compressible and elastoviscoplastic. Allowance is made for the presence of a clearance between the lateral surface of the piston and the barrel bore walls and the associated gas flow between the firing and the light-gas chamber. Calculation results are given.     

双阳极磁控注入枪束流特性的研究

 介绍了用于34GHz基波回旋速调管的双阳极磁控注入枪的结构特点，为了准确分析磁控注入枪的束流特性，建立了阴极表面理论模型，用新编制的程序模拟了电子轨迹。模拟和测量结果显示磁场对磁控注入枪的束流有影响，磁控注入枪的束流也与阴极温度和空间电荷效应有关系。     

中物院远红外自由电子激光实验研究

中国工程物理研究院基于射频直线加速器技术的远红外自由电子激光(FIR-FEL)实验取得阶段性进展,于2005年3月24晚8时30分首次出光, 并多次重复. 中心波长115μm, 谱宽1%.介绍了实验系统的主要组成部分和主要实验结果.     

X波段盘圈加速结构热阴极微波电子枪的研究

介绍了采用盘圈(DAW)加速结构在11.43GHz下研制的热阴极微波电子枪注入器，分析了注入器中DAW加速结构支撑杆对于微波特性的影响以及加速结构中的模式重叠问题. 针对该结构的强腔间耦合以及次临近耦合不能忽略的特点，对其调谐方法进行了分析研究.给出了该长腔链热阴极微波电子枪注入器的物理设计及粒子动力学计算结果，电子能量为5—6MeV，脉冲流强为40mA，电子束发射度为3.4πmm.mrad. 该微波电子枪的加工焊接已经完成，文中给出了其冷测结果.     

相对论二极管电子枪设计的分析解与实验的比较

本文对轴对称场二极管区电子运动所遵循的近似轨迹方程进行数值求解,以此做为设计相对论二极管电子枪的依据,与实验结果相比较,符合较好。     

UV protection filters by dielectric multilayer thin films on Glass BK-7 and Infrasil 301

The increasing use of Ultraviolet (UV) light in medicine, industrial environments, for cosmetic use, and even in consumer products necessitates that greater attention be paid to the potential hazards of this type of electromagnetic radiation. To avoid any adverse effects of exposure to this type of radiation, four suitable protection filters were produced to block three UV bands (UVA, UVB, and UVC). The design structure of the required dielectric multilayer filters was done by optical thin film technology using the absorbing property of UV radiation for the substrates and dielectric materials. The computer analyses of the multilayer filter formulas were prepared using Macleod Software for the production processes. The deposition technique was achieved on optical substrates (Glass BK-7 and Infrasil 301) by dielectric material combinations including Titanium dioxide (Ti₂O₃), Hafnium dioxide (HfO₂), and Lima (mixture of oxides SiO₂/Al₂O₃); deposition being achieved using an electron beam gun. The output results of the theoretical and experimental transmittance values for spectral band from 200 nm to 800 nm were discussed in four processes. To analyze the suitability for use in ‘real world’ applications, the test pieces were subjected to the durability tests (adhesion, abrasion resistance, and humidity) according to Military Standard MIL-C-675C and MIL-C-48497A.     

微脉冲电子枪的初步实验研究

给出了微脉冲电子枪的模拟计算及其初步实验结果. 该电子枪采用铜铝镁合金作为冷阴极材料, 在以磁控管作为微波功率源的出束实验中得到了100mA/cm²的电流密度.实验结果与次级电子倍增解析计算和SEEG程序的模拟计算结果基本符合, 初步验证了微脉冲电子枪的基本原理, 为今后实验中得到更大的电流密度打下了基础.     

北京自由电子激光最近进展──实现饱和振荡

北京自由电子激光(BFEL)装置于1993年底在10.68μm处实现了饱和振荡.输出激光能量为3mJ,饱和平顶宽度2μs.对应饱和振荡平均功率为210kW(宏脉冲),峰值功率约为20MW,比自发辐射高8个量级,单程小讯号净增益为24%,转换效率为0.45%,与理论预期结果相符.光束质量接近衍射极限.目前装置可工作于9-11μm.     

NEPCⅡ新电子枪热结构分析与测试

北京正负电子对撞机重大改造工程(BEPCⅡ)要求其直线注入器提供更高的能量和流强, 为此必须设计大电流和小发射度的新电子枪, 以提高正电子的产额. 利用ANSYS对BEPCⅡ新电子枪的温度场分布及结构的热变形进行了模拟分析. 对于电子枪复杂的内部结构形态以及能量转换方式, 分析了传导传热方式对温度场的影响. 在此基础上进行了温度场与结构变形的耦合分析, 利用EGUN对电子枪形变前后束流光学特性进行模拟分析, 并对模拟结果与试验 测试结果进行了分析比较.     

ELECTRON GUN FOR LARGE ORBIT GYROTRON (LOG) WITH DECREASED INFLUENCE OF CATHODE PLASMA ON ELECTRON BEAM PROPERTIES

High power Large Orbit Gyrotron (LOG) [1] is now under development at FIR FU. First version of this device was recently manufactured and then assembled with power supply ETIGO-IV [2]. Results of preliminary tests of electron-optic system are presented. The conditions when stableflat form of current pulse realized are discussed. Analytical estimations of cathode-anode distance to achieve small influence of cathode plasma during high voltage (HV) pulse are performed. Two new electron gun versions with decreased influence of the cathode plasma on its impedance and pulse form are suggested and optimized. New optimal magnetic field distributions are found. First gun has quiasi-flat cathode configuration near the anode diaphragm and provides operating current about 60 A. Second one uses blade cathode with operating current about 30 A. Beam quality for both guns is suitable for LOG operation.