利用弧形光栅尺测量大型转轴扭矩的原理研究

利用弧形光栅尺的旋转微位移测量功能,组建一组测量体系,用于测量巨型转轴的扭矩。采用四组相同的弧形光栅尺同时测量两截面的相对转角,通过多点测量实现误差均化,得出了消除转轴直径对测量影响的公式,使仪器的环境适应能力得到了极大地提高。根据不同的工作情况,提出了相应的动态测量扭矩的计算方程。实现了大型机械设备主传动的动力监测,为设备自动化、智能化奠定了基础。     

A combined programming and iteration algorithm for finite element analysis of three-dimensional contact problems

Comparing with two-dimensional contact problems, three-dimensional frictional contact problems are more difficult to deal with, because of the unknown slip direction of the tangential force and enormous computing time. In order to overcome these difficulties, a combined PQP (Parametric Quadratic Programming) and iteration method is derived in this paper. The iteration algorithm, which alleviates the difficulty of unknown slip direction, is used along with the PQP method to cut down computing costs. Numerical example is given to demonstrate the validity of the present algorithm. The project supported by the Machinary and Electronics Ministry of China     

The driving torque of a rotating levitated cylindrical permanent magnet above a superconductor

Due to the Meissner effect, a permanent magnet is levitated, when released above a high temperature superconductor. When there is an inhomogeneous temperature field around the magnet, the magnet might start to oscillate with increasing amplitude until it remains in a continuous rotation. A mathematical model for the described effect is presented which couples heat transfer and electromagnetic forces with the equation of motion, yielding to a multiphysics task. In a detailed analysis it is found, that the torque which drives the rotation of the magnet, is explicitly given in terms of Bessel functions and the Fourier coefficients of order zero and one of the temperature field of the surrounding air.     

Magnetization switching modes in nanopillar spin valve under the external field

The current-induced magnetic switching is studied in Co/Cu/Co nanopillar with an in-plane magnetization traversed under the perpendicular-to-plane external field.Magnetization switching is found to take place when the current density exceeds a threshold.By analyzing precessional trajectories,evolutions of domain walls and magnetization switching times under the perpendicular magnetic field,there are two different magnetization switching modes:nucleation and domain wall motion reversal;uniform magnetization ...     

Relaxation Dynamics and Magnetic Anisotropy in a Low‐Symmetry DyIII Complex

The magnetic behaviour of a Dy(LH)₃ complex (LH^? is the anion of 2‐hydroxy‐N′‐[(E)‐(2‐hydroxy‐3‐methoxyphenyl)methylidene]benzhydrazide) was analysed in depth from both theoretical and experimental points of view. Cantilever torque magnetometry indicated that the complex has Ising‐type anisotropy, and provided two possible directions for the easy axis of anisotropy due to the presence of two magnetically non‐equivalent molecules in the crystal. Ab initio calculations confirmed the strong Ising‐type anisotropy and disentangled the two possible orientations. The computed results obtained by using ab initio calculations were then used to rationalise the composite dynamic behaviour observed for both pure Dy^III phase and Y^III diluted phase, which showed two different relaxation channels in zero and non‐zero static magnetic fields. In particular, we showed that the relaxation behaviour at the higher temperature range can be correctly reproduced by using a master matrix approach, which suggests that Orbach relaxation is occurring through a second excited doublet.     

Friccohenics of Continuum and Non‐Continuum Models for Liquid Flow Applied for Heteromolecular Interaction of DNA Bases and Sugars Estimated with Mansingh Equation

Newtonian and non‐Newtonian liquids widely characterize continuum and non‐continuum models for flows, thus, viscous (continuum) and drop wise (non‐continuum) flows of water and aqueous nucleotides (2‐deoxy adenosine‐DOA, thymidine‐TMD) and nucleosides (guanosine monophosphate‐GMP, adenosine triphosphate‐ATP) with integral unites‐2‐deoxy ribose‐DOR (referred as DNA bases and sugars) have been studied with Survismeter. Time data for viscous (t and drop wise (dt) flows along with drop counts (n) for aqueous solutions of 0.4–1.4 millimol (mm) DNA base and sugars with survismetere at 288.15, 293.15, and 298.15 K are measured for viscosities and surface tension, respectively. The t and n are fitted in Mansingh equation for Friccohesity (σ) calculation that determines dipole moment (µ). The t, dt, and n data are measured for water from 15 to 70°C at an interval of 5°C for standard equation for dipole moment calculation. The t, dt and n values decrease with temperature where the σ is directly proportional to μ values with slight increase with compositions and decreases with temperatures. A continuous decrease in μ values with compositions is noted with slightly higher decrease at 288.15 with both millimol and temperature. The higher decrease with temperatures weakens Coulombic forces ((q₁ · q₂)/r², with charges q₁ and q₂, and radii r)) where σ increase.     

综合传动装置起动扭矩测试试验研究

低温环境起动性能是表征车辆动力性能的一项重要指标。对液力机械传动车辆而言,由于综合传动装置自身技术特点,改善车辆起动性能除应当考虑发动机自身起动阻力外,还应当考虑综合传动装置的起动阻力。在系统分析综合传动装置技术特点和功率流向的基础上,总结了发动机起动过程的主要特征,提出采用稳态试验与动态试验相结合的台架试验方法进行综合传动装置起动扭矩测试。以某高速履带车辆为研究对象,进行了综合传动装置起动扭矩测试。试验结果表明,传动油温的变化和各类油泵的功率消耗是决定综合传动装置起动扭矩大小的关键因素,为改进车辆总体设计和提高车辆起动性能提供了依据。     

取压方式对微通道内单相摩擦阻力特性的影响

本文以去离子水和氮气为工质,在水平圆形微通道(dh=0．336 mm)中采用两种直接取压方式-缝隙取压和小孔取压,对单相摩擦阻力特性进行了实验研究,并通过改变缝隙宽度,研究缝隙宽度对压降测量偏差的影响．     

矿物凸起在贝壳珍珠母界面中摩擦耗能机理的研究

论文建立了珍珠母矿物质板相对滑移时表面矿物凸起相互攀爬摩擦的理论模型,得到了界面等效摩擦性能可以表示为两个无量纲参数的函数:凸起高宽比α=A/l、凸起高度与板厚度比β=A/D.理论预测与有限元模拟结果对比,两者符合良好,验证了理论模型的有效性.通过理论和计算分析,得到以下结论:(1)矿物质板表面凸起的存在对板间界面摩擦...     

O形与C形组合密封圈的力学性能对比分析

建立了 O形密封圈与C形组合密封圈的轴对称模型,分析了两种密封圈的静、动密封性能和过孔性能,并计算出了不同压力下密封圈的摩擦阻力.对比两种密封圈的性能,结果表明:O形密封圈适用于较低压力的静密封;高压静密封、压力超过15MPa时的动密封及过孔工况下,O形密封圈的使用需增加挡圈;因O形圈变形严重,局部应力较大,易发生疲劳...