On the hysteresis of vortex shedding in a periodically-varying flow

Efforts are made to explore the hysteresis characteristics of vortex shedding in a pipe flow, whose velocity varies periodically in time. Results obtained show that during acceleration of the flow, the vortex strength tends to be stronger, whereas during deceleration of the flow, the situation is reversed. As reconstructed from the velocity signals measured at a point in the flow field, the shed vortex arrays appear to possess uneven vortex strengths in response to periodically-varying incoming flows. Furthermore, in the hysteresis range, the streamwise spacings between the vortices appear to be unequal.     

Contact angle hysteresis of liquid drops as means to measure adhesive energy of zein on solid substrates

Adhesion of zein to solid substrates has been studied using surface energy profiles as indices and by adhesion mapping using atomic force microscopy (AFM). Different plasticizers like glycerol and sorbitol have been used to form mixed films with zein and properties of these films are studied using surface energy profiles. Comparison of the results from the different mixed samples with those from the pure zein films showed that force mapping could identify areas rich in protein. The adhesion maps produced were deconvoluted from sample topography and contrasted with the data obtained from contact angle measurements. A comparison of the two methods shows that the extent of contact angle hysteresis is indicative of both hydrophobicity of the surface as well as the force of adhesion. Mechanical properties and microstructure of zein films prepared by casting from solutions and using Langmuir-Blodgett film technique have been investigated. Pure zein seemed brittle and exhibited an essentially linear relationship between stress and strain. Films with plasticizer were tougher than these films. In general, mixed films showed better mechanical properties than pure films and had higher ultimate tensile strength and increased per cent elongation. Further, the mixed films of zein showed a higher force of adhesion compared to the pure films.     

Adsorption Isotherm of Water Vapor and Its Large Hysteresis on Highly Ordered Mesoporous Silica

The first and second adsorption–desorption isotherms of water vapor on a new mesoporous material derived from kanemite have been measured. The isotherms show unusual type V isotherms and large hysteresis. The type V isotherms, which have never been observed for the other adsorbates, suggest that the mesoporous material has a hydrophobic surface, although the hydrophobicity decreased after treatment with water vapor because of rehydration of the surface. The significantly large hysteresis could be explained by the difference in contact angle between adsorption and desorption.     

Specific features of the thermodynamics of activation in the LaNi<Subscript>5</Subscript>-H<Subscript>2</Subscript> and CeNi<Subscript>5</Subscript>-H<Subscript>2</Subscript> systems

Using heat conducting Tian—Calvet calorimetry and volumetric measurements, the first hydrogen absorption—desorption cycles in the LaNi₅-H₂ and CeNi₅-H₂ systems were studied. The pressure—composition isotherms were plotted, the equilibrium pressures of hydrogen along the absorption and desorption branches and in the region of hysteresis for different activation steps were determined, and the enthalpies of phase transitions α → β and β → α were calculated. The profiles of the heat evolution curves were analyzed. It was concluded that the mechanism of the reactions studied changes upon activation.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 1, pp. 134–139, January, 2005.     

Theory of electron tunneling through a bridge molecule with two electronic levels at low temperatures

A theory of electron tunneling through a single-center bridge redox group that has two electronic levels participating in the electron transfer process is presented. The temperature is presumed to be low enough to ignore activation redox conversions of the bridge group. Salient features of this system are due both to the presence of two electroactive states of the bridge group and to relaxation processes along the reaction coordinate. The processes in question make the tunneling current time-dependent at fixed potentials and can bring about hysteresis in current-voltage curves when cycling the bias potential. Effects of inelastic tunneling with excitation of vibrations of a local quantum degree of freedom are considered.     

Bifurcation phenomena near homoclinic systems: A two-parameter analysis

The bifurcations of periodic orbits in a class of autonomous three-variable, nonlinear-differential-equation systems possessing a homoclinic orbit associated with a saddle focus with eigenvalues ( ±i,), where ¦/¦ < 1 (Sil'nikov's condition), are studied in a two-parameter space. The perturbed homoclinic systems undergo a countable set of tangent bifurcations followed by period-doubling bifurcations leading to periodic orbits which may be attractors if ¦/¦ < 1/2. The accumulation rate of the critical parameter values at the homoclinic system is exp(-2¦/¦). A global mechanism for the onset of homoclinicity in strongly contractive flows is analyzed. Cusp bifurcations with bistability and hysteresis phenomena exist locally near the onset of homoclinicity. A countable set of these cusp bifurcations with scaling properties related to the eigenvalues±i of the stationary state are shown to occur in infinitely contractive flows. In the two-parameter space, the periodic orbit attractor domain exhibits a spiral structure globally, around the set of homoclinic systems, in which all the different periodic orbits are continuously connected.     

Mechanism of the molecular hysteresis

The redox behavior in acetone solution of (1,5-dithiacyclooctane 1-oxide)bis(pentaammineruthenium(II)) has been characterized, where the concept of “molecular hysteresis” is presented. Detailed thermodynamics for the complex are studied, in which intramolecular electron transfer rates for Ru³⁺OS/Ru²⁺→Ru²⁺SO/Ru³⁺ were determined as 0.12 sec^?1 and 0.055 sec^?1. The molecular hysteresis consists of two important factors: isomerizations for the sulfoxideruthenium complexes and the slow intramolecular electron transfer in the complex; both are examined. Isomerization rates for Ru³⁺S→O and Ru²⁺O→S determined range from 0.4 to 5000 sec^?1 and from 0.7 to 16 sec^?1, respectively, for [Ru(NH₃)₅(sulfoxide)]^2+/3+. A mechanism for the slow electron transfer in the complex is also presented. Features of molecular hysteresis are discussed.     

Modulated differential scanning calorimetry in the glass transition region

Temperature-modulated calorimetry (TMC) allows the experimental evaluation of the kinetic parameters of the glass transition from quasi-isothermal experiments. In this paper, model calculations based on experimental data are presented for the total and reversing apparent heat capacities on heating and cooling through the glass transition region as a function of heating rate and modulation frequency for the modulated differential scanning calorimeter (MDSC). Amorphous poly(ethylene terephthalate) (PET) is used as the example polymer and a simple first-order kinetics is fitted to the data. The total heat flow carries the hysteresis information (enthalpy relaxation, thermal history) and indications of changes in modulation frequency due to the glass transition. The reversing heat flow permits the assessment of the first and higher harmonics of the apparent heat capacities. The computations are carried out by numerical integrations with up to 5000 steps. Comparisons of the calculations with experiments are possible. As one moves further from equilibrium, i.e. the liquid state, cooperative kinetics must be used to match model and experiment.On leave from Toray Industries, Inc., Otsu, Shiga 520, Japan.This work was supported by the Division of Materials Research, National Science Foundation, Polymers Program, Grant # DMR 90-00520 and the Division of Materials Sciences, Office of Basic Energy Sciences, U. S. Department of Energy at Oak Ridge National Laboratory, managed by Lockheed Martin Energy Research Corp. for the U. S. Department of Energy, under contract number DE-AC05-96OR22464. Support for instrumentation came from TA Instruments, Inc. Research support was also given by ICI Paints, and Toray Industries, Inc.     

Highly Axial Magnetic Anisotropy in a N3O5 Dysprosium(III) Coordination Environment Generated by a Merocyanine Ligand

A spiropyran‐based switchable ligand isomerizes upon reaction with lanthanide(III) precursors to generate complexes with an unusual N₃O₅ coordination sphere. The air‐stable dysprosium(III) complex shows a hysteresis loop at 2 K and a very strong axial magnetic anisotropy generated by the merocyanine phenolate donor.     

L1_0-FePt合金单层磁性薄膜的微磁学模拟

具有四方结构的L10-FePt合金因其具有高磁晶各向异性和良好的化学稳定性而成为超高密度薄膜磁记录介质的最佳选择.对实验制备得到的磁性能良好的垂直取向L10-FePt合金单层膜进行了微磁学分析.在传统微磁学模型的基础上,根据晶体的对称性,引入了四角磁晶各向异性能密度的唯象表达形式;又依据薄膜生长过程中晶格对称性的破坏,考虑了薄膜面内的应力,并引入了磁弹性能.以四角磁晶各向异性能和磁弹性能为重点,对L10-FePt合金单层膜的磁滞回线进行了详细的分析,并且用微磁学方法确定了薄膜面内应力的大小.