The operational performance of the Yale ESTU

The ESTU began operation in 1988 and achieved the design voltage of 20 MV in 1990. Since that time, improvements to the gas handling system, negative ion injector, accelerator terminal and control system have greatly increased its capability and reliability. Today, the ESTU can efficiently produce an extensive assortment of stable ions at wide-ranging energies in support of low-energy nuclear physics.     

“神龙一号”注入器研制

“神龙一号”注入器是直线感应加速器的束流源，它采用了感应叠加的高压加载方式，包括脉冲功率系统、感应腔、阴阳极杆、绝缘支撑、二极管和束流传输系统等子系统. 在研制中采用了径向绝缘支撑、对中支撑调节系统、类Pierce阴极等先进技术，以及二极管线圈内置和外径为800mm的铁氧体大环等创新. 参数测试显示，3.5MeV注入器达到了世界先进水平.     

同轴双无衍射光的理论与实验

提出同轴双无衍射光的概念。如果两束汇聚角略有不同的同轴无衍射光同时存在，则它们相互之间叠加干涉后产生一种纵向呈周期变化的光场结构，这是一种新的光束空间分布，这种光束在横向仍是一种同心环光斑，可用于精密对准。而在不同纵向位置，这些同心环的强度分布是不同的，且是周期性变化的。同轴双无衍射光的轴向周期性可用于沿光束传播方向的定位。文中提出了双环缝法、分段圆锥透镜法、正弦相位环光栅法等实现同轴双无衍射光的理论与实验方法，分析了同轴双无衍射光的横向与纵向传播的衍射光斑特性，理论计算与实验测量的结果基本相符合。     

Efficiency Enhancement of Coaxial-Cavity Electron Cyclotron Resonance Maser by Tapering Guide Magnetic Field

A coaxial-cavity cyclotron resonance maser (CRM) oscillator with tapered guide magnetic field is proposed. It is shown that the transmission quality can be improved by tapering the guide magnetic field. Simulation indicates that the efficiency of a millimeter-wave gyrotron oscillator may be reached up to 38.7% by optimizing the tapered magnetic field.     

An improved injector bunching geometry for ATLAS

The bunching system of the ATLAS positive ion injector (PII) has been improved by relocating the harmonic buncher to a point significantly closer to the second stage sine-wave buncher and the injector LINAC. The longitudinal optics design has also been modified and now employs a virtual waist from the harmonic buncher feeding the second stage sine-wave buncher. This geometry improves the handling of space charge for high-current beams, significantly increases the capture fraction into the primary rf bucket and reduces the capture fraction of the unwanted parasitic rf bucket. Total capture and transport through the PII has been demonstrated as high as 80% of the injected dc beam while the population of the parasitic, unwanted rf bucket is typically less than 3% of the total transported beam. To remove this small residual parasitic component a new traveling-wave transmission-line chopper has been developed reducing both transverse and longitudinal emittance growth from the chopping process. This work was supported by the U.S. Department of Energy under contract W-31-109-ENG-38.     

HIRFL注入器PIG离子源的研制

本文介绍了兰州重离子加速器(HIRFL)的注入器(SFC)所用PIG离子源的研制和改进工作,使用新研制的PIG源,已在注人器SFC上获得了5μA的O_(16)~(5+)及10μA的C_(16)~(4+)的离子束。     

Spectral Domain Analysis of Coaxial Cavities

Coaxial cavities are used in high power gyrotrons as the beam-wave interaction structure. Much research has been devoted to their mode selective properties. A coaxial cavity lacks a sharp boundary at its open end, so it has some physical features that can only be observed using a spectral model, such as frequency-dependent field profiles and mode overlapping effects. These properties are important since cold tests are usually conducted in the frequency domain. This study applies the incident/reflected wave boundary condition to the wave equation of a weakly irregular coaxial waveguide. The resistivity of the wall is considered in the analysis. Calculations reveal that the fixed-position spectrum yields an uncertain resonant frequency and quality factor. Although the maximum-field spectrum can uniquely determine the properties of the coaxial cavity, the resonant frequency obtained using the maximum-field spectral model is inconsistent with that obtained using the temporal model. The field-energy spectrum explains the low Q nature of the coaxial cavity. Moreover, resonant frequencies evaluated using the field-energy spectrum agree precisely with those evaluated using the temporal model.     

Solventless injecction for packed column supercritical fluid chromatography

The adverse effects of injection solvent strength on microbore packed column SFC band broadening are demonstrated and a solventless injection system that eliminates these effects is introduced. The injection system removes solvent in a GC-like manner using a retention gap and an on-column capillary GC syringe. The analyte is delivered to the analytical column in a solvent-free plug of supercritical fluid mobile phase.     

At-column injector for capillary GC — design and evaluation

The present paper describes constructional details and evaluations of an at-column injector for capillary GC. Injections were made via a sample loop on a 0.32 mm i.d. capillary column. Two rotary valves were employed to allow a wash of the sample loop and a backflush of the transfer line. Repeatability, calculated from absolute area counts for n-alkanes was between 0.3–1% RSD, for injected sample volumes between 5 and 100 μl. Promising results were also obtained with syringe-based injections on narrow bore (100 μ i.d.) columns. Repeatability on the basis of normalized area counts was in the order of 0.1–0.2% RSD, while solvent tailing was practically absent.     

Large volume sample application by a simplified “closed” on-column injector in capillary gas chromatography

Summary A new simplified version of a closed on-column injector is introduced. Because of its design isobaric injection conditions do not have to be followed and a wide range of injection temperatures above the boiling point of the sample solvent can be chosen for on-column injections in capillary gas chromatography. Also, when following certain basic injection rules, injections of large sample volumes (20 l or more) give accurate and reproducible results without further problems.Presented at the 17th International Symposium on Chromatography, September 25–30, 1988, Vienna, Austria.