燃煤循环流化床燃烧脱硫的模型预测

燃煤循环流化床燃烧脱硫的模型预测池涌，岑可法，倪明江Ｐ·Ｂａｓｕ（浙江大学能源系杭州３１００２７）关键词：循环流化床，燃烧，脱硫，模型预测一、引言循环流化床锅炉在过去十几年中得到了广泛的应用，但与此同时由于循环流化床内流体动力特性的高度复杂使得数学模...     

Optimizing control of simulated moving beds--linear isotherm

A new optimization based adaptive control strategy for simulated moving beds (SMBs) is proposed. A linearized reduced order model, which accounts for the periodic nature of the SMB process, is used for online optimization and control. The manipulated variables are the four inlet flow rates, the outputs are the raffinate and extract concentrations. Concentration measurements at the raffinate and extract outlets are used as the feedback information. The state estimate from the periodic Kalman filter is used for the prediction of the outlet concentrations over a chosen horizon. Predicted outlet concentrations are the basis for the calculation of the optimal input adjustments, which maximize the productivity and minimize the desorbent consumption subject to constraints on product purities. The realization of this concept is discussed and the implementation on a virtual eight column SMB platform is assessed, in the case of binary linear systems. For a whole series of typical plant disturbances it is shown that the proposed approach is effective in minimizing off-spec products and in achieving optimal SMB operation, also in the case where there are significant model uncertainties.     

Adsorption in columns packed with porous adsorbent particles having partially fractal structures

A mathematical model is constructed and solved that could describe the dynamic behavior of the adsorption of a solute of interest in single and stratified columns packed with partially fractal porous adsorbent particles. The results show that a stratified column bed whose length is the same as that of a single column bed, provides larger breakthrough times and a higher dynamic utilization of the adsorptive capacity of the particles than those obtained from the single column bed, and the superior performance of the stratified bed becomes especially more important when the superficial velocity of the flowing fluid stream in the column is increased to accommodate increases in the system throughput. This occurs because the stratified column bed provides larger average external and intraparticle mass transfer and adsorption rates per unit length of packed column. It is also shown that increases in the total number of recursions of the fractal and the ratio of the radii between larger and smaller microspheres that make up the partially fractal particles, increase the intraparticle mass transfer and adsorption rates and lead to larger breakthrough times and dynamic utilization of the adsorptive capacity of the particles. The results of this work indicate that highly efficient adsorption separations could be realized through the use of a stratified column comprised from a practically reasonable number of sections packed with partially fractal porous adsorbent particles having reasonably large (i) total number of recursions of the fractal and (ii) ratio of the radii between larger and smaller microspheres from which the partially fractal particles are made from. It is important to mention here that the physical concepts and modeling approaches presented in this work could be, after a few modifications of the model, applied in studying the dynamic behavior of chemical catalysis and biocatalysis in reactor beds packed with partially fractal porous catalyst particles.     

Near Infrared Spectroscopy of the Cretaceous Red Beds in Inner Mongolia DongshengmiaoSCIEI北大核心CSCD

Take the cores and surface weathered soil from the Cretaceous red beds in the western of Dongshengmiao mine of Inner Mongolia and analysis with near-infrared spectroscopy. The result shows that near-infrared spectroscopy can identify mineral quickly through the characteristic absorption peaks of each group. The Cretaceous red beds in the western of Dongshengmiao mine is argillaceous cementation, it is mainly composed of quartz, feldspar, montmorillonite, illite, chlorite, muscovite etc, the mineral composition is mainly affected by the upstream source area. The clay mineral like montmorillonite water swelling and uneven drying shrinkage expands the original crack and creates new cracks, reduces its strength, which is the mainly reason of its disintegration. According to the composition of clay mineral, we speculate its weathering process is mainly physical weathering, the climate during the weathering is cold and dry. The results can not only improve the geological feature of the mining area, but also show that the near-infrared spectroscopy technology can analyze the mineral composition of soil and rock effectively on the basis of Mineral spectroscopy, which demonstrates the feasibility of the near-infrared spectroscopy can analyze minerals in soil and rock quickly, that shows the feasibility in geology study, provides new ideas for the future research of soil and rock.     

基于RST-QFD-Bayes的新型装甲装备通用质量特性评价指标体系构建研究

针对新型装甲装备通用质量特性评价指标体系难以确定的问题,在明确评价指标体系构建原则的基础上,结合新型装甲装备特点,确定了通用质量特性初始评价指标及指标筛选要求,运用QFD将新型装甲装备通用质量特性需求映射为评价指标筛选要求,采用粗糙集理论(Rough Set Theory,RST)确定了指标筛选重要度,考虑到关联度的不确定性及多个专家估计值的平均值和估计值的波动程度,将贝叶斯理论引入关系矩阵的确定中,用区间数确定了关联度,进行了评价指标筛选,构建了新型装甲装备通用质量特性评价指标体系,为新型装甲装备通用质量特性评价奠定了基础。     

Multi-scale magnetic resonance measurements and validation of Discrete Element Model simulations

This short review describes the capabilities of magnetic resonance (MR) to image opaque single- and two-phase granular systems, such as rotating cylinders and gas-fluidized beds operated in different fluidization regimes. The unique capability of MR to not only image the solids’ distribution (voidage) but also the velocity of the particulate phase is clearly shown. It is demonstrated that MR can provide measurements over different length and time scales. With the MR equipment used for the studies summarized here, temporal and spatial scales range from sub-millisecond to hours and from a few hundred micrometres to a few centimetres, respectively. Besides providing crucial data required for an improved understanding of the underlying physics of granular flows, multi-scale MR measurements were also used to validate numerical simulations of granular systems. It is shown that predictions of time-averaged properties, such as voidage and velocity of the particulate phase, made using the Discrete Element Model agree very well with MR measurements.     

济阳坳陷陡坡带砂砾岩体储层测井识别及描述技术

陆相断陷湖盆陡坡带发育各种成围的砂砾岩扇体,其储集性能具有极强的非均质性,已成为高成熟勘探区重要的勘探目标,钻前对有利沉积相带的预测以及钻后对储集性能的分析,已成为提高勘探开发效益的关键．针对胜利油田济阳坳陷陡坡带发育的各种成围的砂砾岩扇体,综合应用测井相、多种测井咱应交会法、储层参数的测井定量解释、含油渗透层的测井判识等多种技术和方法,有效地对砂砾岩扇体的成围类型和储层岩性进行了判识,建立了孔隙度、渗透卑等储层参数解释的理论模型并进行了定量解释,划分了有效渗透层,取得了明显的勘探开发效果．这些新技术的综合运用为其他类似地区砂砾岩扇体的勘探与开发提供了技术支持．     

中国红层的分布及地质环境特征

根据我国红层的分布特征及形成背景 ,将我国红层划分为西南地区红层、西北地区红层、中南、东南地区红层和其他地区 (西藏及华北的部分地区 )红层。重点研究了以川滇红层为代表的西南地区红层和以甘肃红层为代表的西北地区红层 ,研究了各个区域红层的地质构造特征、地形地貌特征、气候环境特征等工程地质环境特征 ,根据工程地质环境特征 ,将研究区域的红层划分为四川盆地红层、西昌—滇中红层、滇西红层和甘肃红层.     

FLOW STRUCTURE FORMATION AND EVOLUTION IN CIRCULATING GAS-FLUIDIZED BEDS

The occurrence of heterogeneous flow structures in gas-particle flows seriously affects the gas-solid contacting and transport processes in high-velocity gas-fluidized beds. Particles do not disperse uniformly in the flow but pass through the bed in a swarm of clusters. The so-called “core-annulus“ structure in the radial direction and “S“ shaped axial distribution of solids concentration characterize the typical flow structure in the system. A computational study, using the discrete particle approach based on molecular dynamics techniques, has been carried out to explore the mechanisms underlying formation of the clusters and the core-annulus structure. Based on energybudget analysis including work done by the drag force, kinetic energy, rotational energy, potential energy, and energy dissipation due to particle-particle and particle-wall collisions, the role of gas-solid interaction and inelastic collisions between the particles are elucidated. It is concluded that the competition between gas-solid interaction and particle-particle interaction determines the pattern formation in high-velocity gas-solid flows: if the gas-solid interaction (under elevated pressure) dominates, most of particle energy obtained by drag from the gas phase is partitioned such that particle potential energy is raised, leading to a uniform flow structure. Otherwise, a heterogeneous pattern exists, which could be induced by both particle -particle collisions and gas-solid interaction. Although both factors could cause the flow instability, the non-linear drag force is demonstrated to be the necessary condition to trigger heterogeneous flow structure formation. As gas velocity increases and goes beyond a critical value, the fluid-particle interaction suppresses particle collisional dissipation, and as a consequence a more homogeneous flow regime is formed.     

Magnetic filtration with magnetized granular beds： Basic principles and filter performance

This study is devoted to the explanation of different characteristics of magnetic filtration and the way these characteristics affect the important filtration parameters. Magnetic fields in pores and the force effect of these fields on magnetic particles and the magnetization properties of packed beds composed of ferromagnetic spheres and metal chips are evaluated. The profile of accumulation and capture regions of the particles, the variation of the fluid velocity in these regions and analytic expressions of particle capture radius are presented. The effects of filtration regime parameters on magnetic filter performance were investigated. An analytical expression has been obtained for the dependence of the logarithmic efficiency coefficient on filtration velocity, the geometry of filter elements, the particle size and other parameters of filtration. The stationary and non-stationary equations of the magnetic filtration processes are given. An expression of magnetic filter performance is shown with dimensionless parameters obtained from the filtration system. These relations are useful for calculations in engineering practice, including the design of magnetic filters, provision of suggestions on construction, and optimization and control of filter operation.