Organic SIMS with single massive gold projectile: Ion yield enhancement by silver metallization

The yield of CN from glycine rises from one CN per projectile impact to two when the sample is covered with a nominally 1 nm thick layer of silver. These yields were obtained for bombardment with Au₄₀₀⁴⁺ projectile with 136 keV impact energy. A multitude of CN-based clusters, e.g. Ag_xO_y(CN)_z are produced concurrently. As a result, a total of three CN-based secondary ions are generated per projectile impact. The exceptionally high yield for CN is of interest for biological SIMS.     

聚乙烯醇高含水胶固定化脲酶的研究

冷冻-部分脱水法制成的聚乙烯醇高含水胶固定化脲酶活力收率及对脲素的分解能力明显高于聚丙烯酰胺囱定化脲酶,稳定性相近;用低浓度的戊二醛后处理,提高了固定化酶的稳定性。     

Preparation and mechanical properties of thermal energy storage microcapsules

A series of heat energy storage microcapsules was prepared using melamine-formaldehyde resin as the shell material and the mechanical properties of the shell were investigated. A phase change material whose melting point was 24 °C was used as core and the quantity of heat involved in phase transition was 225.5 J/g. Average diameter of the microcapsules varied from 5 to 10 μm, and the globular surface was smooth and compact. The mechanical properties of the shell were evaluated by observing the surface morphological structure change after application of pressure by means of scanning electron microscopy. When the mass ratio of the core and shell material is 3:1, a yield point of about 1.1×10⁵ Pa was found and when the compression was increased beyond this point the microcapsules showed plastic behavior. This has been attributed to the cross-link density and to the high degree of reaction of the shell material. Different yield points subsequently reflected differences in the mechanical behavior. It was also found that the mechanical intensity of double-shell microcapsules was better than that of single shelled ones.     

Mixed Cationic‐nonionic Surfactants and pH Adjustment Route to Synthesize High‐quality MCM‐48

Using the mixture of cetyltrimethylammonium bromide (CTAB) and p‐Octyl polyethylene glycol phenyl ether (OP‐10) as templates, siliceous MCM‐48 materials can be synthesized with low molar ratio of CTAB to silica (0.139:1) and low concentration of mixed surfactants (ca.5%) and within a wide range of OP‐10/CTAB ratio (0.08?0.25). The materials were characterized by X‐ray powder diffraction, N₂ adsorption/desorption isotherm, TEM, TG‐DSC and ²⁹Si MAS NMR. Measurements indicated that the use of mixed surfactants allowed better condensation and higher ordering of the cubic mesostructure; at the same time, some properties of these materials were sensitive to the OP‐10/CTAB ratio. It was also found that the reduced pH of the gel which had been crystallized for a certain time gave a highly reproducible synthesis with a high silica yield (about 95%). Furthermore, the reaction mechanism of the synthesis is discussed in detail.     

Shear flow experiments in an assembly of gel beads and modelling of bingham behavior

In this paper, we present a rheological study of a compact layer of highly swollen gel beads. The flow regimes of these systems are modelled by an elastic sinusoid moving in a Newtonian fluid. This model predicts a yield stress varying with the square root of the elastic modulus of the gel bead. The slope at the origin (at zero velocity) of the flow curve is expected to depend only on geometrical parameters and on the solvent viscosity. The experimental data are in qualitative agreement with the theoretical predictions.     

An efficient metal catalyst free approach to synthesize 5-(4-(1,2,4,5 tetrazin-3-yl)benzylamino)-5-oxopentanoic acid

Despite the wide use of 1,2,4,5- tetrazines in biomaterials and materials science, currently there does not exist synthetic method(s) that can yield significant amount of 1,2,4,5- tetrazines without the use of potentially toxic metal catalysts. Here, we report a less energy intensive and more efficient metal catalyst free approach for the synthesis of an asymmetric tetrazine. A range of operating parameters such as extraction pH and temperature were regulated to achieve a practical yield nearly 1.5 times greater than the yields reported in the literature for similar synthetic procedures.     

Reproducible method to enrich membrane proteins with high purity and high yield for an LC‐MS/MS approach in quantitative membrane proteomics

The proportionately low abundance of membrane proteins hampers their proteomic analysis, especially for a quantitative LC‐MS/MS approach. To overcome this limitation, a method was developed that consists of one cell disruption step in a hypotonic reagent using liquid nitrogen, one isolation step using a low speed centrifugation, and three wash steps using high speed centrifugation. Pellets contained plasma, nuclear, and mitochondrial membranes, including their integral, peripheral, and anchored membrane proteins. The reproducibility of this method was verified by protein assay of four separate experiments with a CV of 7.7%, and by comparative LC‐MS/MS label‐free quantification of individual proteins between two experiments with 99% of the quantified proteins having a CV ≤30%. Western blot and LC‐MS/MS results of markers for cytoplasm, nucleus, mitochondria, and their membranes indicated that the enriched membrane fraction was highly pure by the absence of, or presence of trace amounts of, nonmembrane marker proteins. The average yield of membrane proteins was 237 μg/10 million HT29‐MTX cells. LC‐MS/MS analysis of the membrane‐enriched sample resulted in the identification of 2597 protein groups. In summary, the developed method is reproducible, produces a highly pure membrane fraction, and generates a high yield of membrane proteins.     

ELECTRORHEOLOGICAL PROPERTIES OF POLYANILINE/PUMICE COMPOSITE SUSPENSIONS

Electrorheological （ER） properties of polyaniline （PAni）, pumice and polyaniline/pumice composites （PAPC） were investigated. Polyaniline and PAni/pumice composite were prepared by oxidative polymerization. PAni/pumice particlesbased ER suspensions were prepared in silicone oil （SO）, and their ER behavior was investigated as a function of shear rate, electric field strength, concentration and temperature. Sedimentation stabilities of suspensions were determined. It has been found that ER activity of all the suspensions increases with increasing electric field strength, concentration and decreasing shear rate. It has shown that the suspensions have a typical shear thinning non-Newtonian viscoelastic behavior. Yield stress of composite suspensions increased linearly with increasing applied electric field strength and with concentrations of the particles. The effect of high temperature on ER activity of purrfice/silicone oil systems was also investigated.     

人参栽培研究进展

人参作为经济作物在中国有着数千年的种植历史。人参具有多种药理活性,在食品、医药和化妆品等领域有着广泛的应用。然而,目前人参的实际产量并不能满足市场需求。提升人参生产效率仍是当前阶段人参种植研究工作的首要目标。近些年,在人参选地、种子处理、播种、搭棚、培育和采收等生产环节中,涌现了许多新模式、新技术、新方法和新仪器。本文从栽培模式和技术角度综述人参栽培的研究现状,希望为进一步提升人参生产效率提供参考。     

Effect of ultrasound and enzymatic pre-treatment on yield and properties of banana juice

Effect of ultrasound and enzymatic pre-treatments with cellulase and pectinase on yield and properties of banana juice were investigated. A two-level full factorial design was employed. The factors selected were ultrasonication time (0 and 30 min), cellulase concentration (0 and 0.2%) and pectinase concentration (0 and 0.2%). The responses studied were yield, viscosity, clarity, total soluble solids (TSS) and pH. It was observed that pectinase was more effective in increasing the yield of juice compared to cellulase. Ultrasonic pre-treatment alone did not significantly increase the yield of juice. When ultrasound was combined with pre-treatment with both the enzymes maximum yield of 89.40% was obtained compared to 47.30% in the control. The viscosity of the juice decreased with addition of enzymes and with application of ultrasound. The clarity of the juice was not affected by cellulase treatment, but improved with pectinase treatment. Ultrasonication alone was found to be more effective than pectinase or cellulase treatment in improving the clarity of the juice. The TSS increased with enzymatic treatment, ultrasonication and their combination. pH was not affected by treatment type, but was found to be lower for the treated juices. Significant correlations were observed between the various responses.