The study of the influence of uniaxial stress on impurity complexes in silicon

The influence of external uniaxial stress on the different indium-donor complexes in silicon has been studied using the perturbed γ –γ angular correlation (PAC) method. Such effect of an applied stress is detected by means of the probe atoms situated at different complexes in the sample. The current results showed that the responses of the probes in an extrinsic silicon samples are found to be dissimilar for the same value of stress. Such change in the local environments of the probe atoms could be associated with the various strain field created by the implantations of varied size of impurities. The phosphorous implantation in silicon has even lead to the complete absence of observable effect of the applied stress suggesting significant lose of the elasticity of the sample.     

爆磁压缩发生器通过脉冲变压器对脉冲形成线充电的理论分析

 将爆磁压缩等效为电流源的方法，对爆磁压缩发生器通过脉冲变压器对脉冲形成线充电进行了理论分析，得出爆磁压缩发生器在负载上产生电流波形（简称负载电流）为直线情况和任意电流波形情况下充电电流和充电电压的表达式。分析表明变压器耦合互感与负载电流随时间变化增长率是脉冲形成线充电的两个重要参数，脉冲形成线第一个充电电压峰值与变压器的耦合互感和负载电流波形斜率成正比，负载电流波形斜率的变化可以改变充电电压峰值的时间，斜率不断增加可以延长第一个充电电压峰值时间，从而可能增加充电电压的幅值，提高爆磁压缩发生器能量的利用效率。     

Applying a Mode Selector to Improve the Pulse-Compression Performance of Asymmetric-Coupled-Waveguide-Based Dispersion Compensators

An InGaAsP slab-type asymmetric-coupled-waveguide-based dispersion compensator with a mode selector has been designed and fabricated. The mode selector is necessary to select either a symmetric [with a positive group-velocity dispersion (GVD)] or antisymmetric (with a negative GVD) supermode. These supermodes exist simultaneously in the dispersion-compensation region of the device. Pulse-compression experiments were used to test the dispersion compensator, evaluating the function of the mode selector. A theoretical study of the experimental results shows that the mode selector obtains a very strong selectivity (nearly 100%) for the antisymmetric supermode.     

The change of the superstructure of semicrystalline polymers during deformation: results from small-angle scattering with synchrotron radiation

The change of the superstructure of different polyethylenes during uniaxial deformation is investigated. The method used is small-angle scattering with synchrotron radiation. For branched polyethylene (Lupolen 1840D) the whole deformation range is analyzed. Beginning with superstructure of the lamellar cluster type, the superstructure partly disappears on a time scale of a few minutes and the fibrillar structure is built up. The degree of destruction and rebuilding depends on the drawing temperature. For very high molecular weight polyethylene (GUR) a reversible change of the superstructure at higher deformation ratios and at different temperatures is observed. The superstructure of (ethylene—hexene) copolymers (TIPELIN) at high draw ratios depends on the drawing temperature and is almost independent of the side group content. Interfibrillar microcracks parallel to the draw direction are produced in samples with a low side group content for draw ratios λ ≥ 1.5.     

The prediction of coal properties using compressed infrared data from osculating polynomials

Reduction of the representation of infrared spectra from coal samples by osculating polynomials of degree nine is discussed. The reduced representation contains polynomial coefficients of order zero to four. Mathematical models of the original spectra are obtained by linear combination of the coefficients. These compressed models are statistically correlated to coal properties, namely, volatile matter, fixed carbon, ash content, heating value, hydrogen, carbon, sulphur, nitrogen, and maximum vitrinite reflectance, and the results are compared with those previously obtained from second derivatives of the same spectra. The use of compressed data, while giving slightly better correlations for some of the properties, has the advantage of requiring less computational time.     

An unflexural refined model of deformation of multilayered plates on an undeformable foundation

The stress-strain state of multilayered plates on an undeformable foundation is investigated. The design diagram of a transversely loaded plate is formed by supplementing it with a symmetric one about the contact surface of the foundation. The double-thickness plate obtained becomes loaded bilaterally and symmetrically about its midsurface. In such a way, only unflexural deformations can be modeled, which reduces the number of unknowns and the general order of differentiation of the resolving system of equations. The refined continual model developed takes into account the deformations of transverse shear and transverse compression in high iterative approximations. The cases of a rigid contact between the foundation and the plate and frictionless slip of the plate over the foundation are considered. Calculations confirm the efficiency of such an approach, which allows one to obtain solutions qualitatively and quantitatively close to three-dimensional ones. __________ Translated from Mekhanika Kompozitnykh Materialov, Vol. 42, No. 5, pp. 643–654, September–October, 2006.     

Multiscale kernels

This paper reconstructs multivariate functions from scattered data by a new multiscale technique. The reconstruction uses standard methods of interpolation by positive definite reproducing kernels in Hilbert spaces. But it adopts techniques from wavelet theory and shift-invariant spaces to construct a new class of kernels as multiscale superpositions of shifts and scales of a single compactly supported function φ. This means that the advantages of scaled regular grids are used to construct the kernels, while the advantages of unrestricted scattered data interpolation are maintained after the kernels are constructed. Using such a multiscale kernel, the reconstruction method interpolates at given scattered data. No manipulations of the data (e.g., thinning or separation into subsets of certain scales) are needed. Then, the multiscale structure of the kernel allows to represent the interpolant on regular grids on all scales involved, with cheap evaluation due to the compact support of the function φ, and with a recursive evaluation technique if φ is chosen to be refinable. There also is a wavelet-like data reduction effect, if a suitable thresholding strategy is applied to the coefficients of the interpolant when represented over a scaled grid. Various numerical examples are presented, illustrating the multiresolution and data compression effects.     

轴线起爆式螺线管型爆磁压缩发生器理论模型

 对轴线起爆式螺线管型爆磁压缩发生器进行了理论模型研究，建立了爆炸管的一维爆轰驱动模型、螺线管内空间磁场强度分布模型、爆炸管外表面磁压力模型和发生器系统的等效电路模型等，对此类发生器的物理过程进行系统描述。在此基础上，编制了相应的零维数值模拟程序CEMG 1.0，利用该程序分别对四种不同模型参数的发生器进行了理论计算和参数优化，并对其中一模型发生器爆炸管外表面的磁压力及其引起的剩余电感进行了计算，给出了剩余电感与初始输入条件及负载电感的关系，从而得到该模型的输出性能极限。对理论模型的正确性进行了实例验算证明。     

Long-Term Prediction of Creep Strain of Expanded Polystyrene

Data obtained in investigating the creep of expanded polystyrene in compression are discussed. An analysis of the results of creep tests 65–608 days long showed that the creep can be predicted for 50 years based on experiments of less duration than the 605 days indicated in EN 13163. For this purpose, it is suggested to employ a 95-fold extrapolation in time if the creep curves are described by a power function (as recommended by EN 13163) or a 50-fold extrapolation if the exponential equation proposed in the present paper is used. __________ Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 6, pp. 795–802, November–December, 2005.     

SINGLE MACHINE SCHEDULING WITH CONTROLLABLE PROCESSING TIMES AND COMPRESSION COSTS （PART I：EQUAL TIMES AND COSTS）

Most papers in scheduling research have treated individual job processing times as fixed parameters. However, in many practical situations, a manager may control processing time by realloeating resources. In this paper, authors consider a machine scheduling problemwith controllable processing times. In the first part of this paper, a special case where the pro-cessing times and compression costs are uniform among jobs is discussed. Theoretical results are derived that aid in developing an O（n^2) algorithm to slove the problem optimally. In the second part of this paper, authors generalize the discussion to general case, An effective heuristic to the genera/ problem will be presented.