Modified Three-Dimensional Formulations of Bending Problems of Homogeneous Plates and Beams under Complex Fixing Conditions

Modified three-dimensional formulations of bending problems of homogeneous elastic plates and beams are considered. Modification of the known three-dimensional formulations reduces to using additional constraints imposed on displacement functions. An advantage of the formulations proposed is that complex fixing conditions of plates and beams can be taken into account.     

Load-Carrying Capacity of Circular Plates Made of a Fiber-Reinforced Composite

The load-carrying capacity of circular plates made of a fiber-reinforced composite and loaded with axisymmetric transverse forces under axisymmetric boundary conditions is investigated. The plates can be freely supported or clamped along their contour. To the known yield condition used, in the plane of main bending moments, there correspond irregular hexagons, which depend on the mechanical properties of composite constituents and some characteristic geometrical parameters. It is shown that, depending on the ratio of ultimate radial and circumferential bending moments, in the plastic state, the circular plates (the central part of the clamped plates) take the form of a cone or a frustum of cone. For each of the cases, the limit load is found, which is a function of the above-mentioned mechanical parameters. The statically allowable fields of bending moments and the corresponding allowable fields of deflection rates are determined. The solutions found are exact. Special cases for the freely supported plates are analyzed, and the results obtained are presented in the form of graphs.__________Translated from Mekhanika Kompozitnykh Materialov, Vol. 41, No. 2, pp. 177–192, March–April, 2005.     

Critical percolation exploration path and SLE 6: a proof of convergence

It was argued by Schramm and Smirnov that the critical site percolation exploration path on the triangular lattice converges in distribution to the trace of chordal SLE ₆. We provide here a detailed proof, which relies on Smirnov’s theorem that crossing probabilities have a conformally invariant scaling limit (given by Cardy’s formula). The version of convergence to SLE ₆ that we prove suffices for the Smirnov–Werner derivation of certain critical percolation crossing exponents and for our analysis of the critical percolation full scaling limit as a process of continuum nonsimple loops. Research of Charles M.Newman was partially supported by the US NSF under grants DMS-01-04278 and DMS-06-06696.     

Material-Adapted Design of Textile-Reinforced Composite Structures with Optimized Vibro-Acoustic and Damping Properties Including Shear Effects

Advanced analytical models have been developed at the ILK, which offer a possibility of calculating the vibro-acoustic and damping behavior of textile-reinforced composite shells and plates with account of shear effects. The simulation models elaborated have been verified on selected examples, and the analytical results were fully corroborated by accompanying numerical calculations for typical lay-ups.__________Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 41, No. 3, pp. 289–302, May–June, 2005.     

ContributionsTriangular embeddings of Kn−Km with unboundedly large m

The author has proposed methods of constructing index 2 and 3 current graphs generating triangular embeddings of graphs K_n−K_m with unboundedly large m (as n increases). As a result, triangular embeddings of graphs of many families of graphs K_n−K_m with unboundedly large m were constructed. The paper gives a survey of these results and a short explanation of the methods.     

An orthotropic plate model for decks of suspension bridges

The main purpose of the present paper is to compare two different kinds of approaches in modeling the deck of a suspension bridge: in the first approach we look at the deck as a rectangular plate and in the second one we look at the deck as a beam for vertical deflections and as a rod for torsional deformations. Throughout this paper we will refer to the model corresponding to the second approach as the beam-rod model. In our discussion, we observe that the beam-rod model contains a larger number of elastic parameters if compared with the isotropic plate model. For this reason the beam-rod model is supposed to be more appropriate to describe the behavior of the deck of a real suspension bridge. A possible strategy to make the plate model more efficient could be to relax the isotropy condition with a more general condition of orthotropy, which is expected to increase the number of elastic parameters. In this new setting, a comparison between the two approaches becomes now possible.Basic results are proved for the suggested problem, from existence and uniqueness of solutions to spectral properties. We suggest realistic values for the elastic parameters thus obtaining with both approaches similar responses in the static and dynamic behavior of the deck. This can be considered as a preliminary article since many work has still to be done with the perspective of formulating models for a complete suspension bridge which take into account not only the deck but also the action on it of cables and hangers. With this perspective, a section is devoted to possible future developments.     

High throughput continuous titration based on a flow ratiometry controlled with feedback-based variable triangular waves and subsequent fixed triangular waves

We propose a new approach for high-throughput continuous titration based on a flow ratiometry. The method was applied to potentiometric titrations of acids and bases. A base solution, the flow rate F_B of which was varied in response to controller output voltage V_c, was merged with an acid solution under constant total (acid + base) flow rate. Downstream, the pH of the mixed solution was measured with a flow-through glass electrode. Initially, V_c, and thus F_B was increased linearly. At the instant the equivalence point (EP) was sensed, the ramp direction of V_c was reversed from upward to downward. The direction was reversed to upward when EP was sensed again. Such the feedback-based operation gives a triangular waveform of V_c, because there is a delay corresponding mainly to the transit time of merged solutions to reach the sensor. The value of V_c that gives EP composition, V_E, was estimated by averaging the most recent maximum and minimum values of V_c. Next, fixed triangular waves of V_c was used to control F_B. The amplitude and the scan rate of the waves were fixed narrower and faster, respectively, than those in the feedback-based operation in order to improve the throughput rate. The EP can be located as long as the scan range covers V_E. These automated processes limited the titration to just the narrow range around EP, and thus realized extremely high throughput rate of maximally 17.6 titrations per minute (=3.4 s per titration) at R.S.D. = 0.35%.     

Efficiency of composite vs. conically shaped chromatographic columns

The theory of composite chromatographic columns has been re-examined and general equations relating their efficiency to those of individual columns were derived. The derivations were based on elementary principles without reference to the principle of variance additivity. Derived also, were general equations for the efficiency of columns with continuously varying diameters, HETP and other properties from which formulae for special cases of practical interest were deduced. An example comparing the efficiencies of two columns, one conical and the other composite was given. The calculations show clearly that the conical column is superior in efficiency for the same total length and total retention volume.     

~(13)C代谢通量分析

代谢通量分析(metabolic flux analysis,MFA)是通过确定代谢网络中代谢流分布来表征细胞代谢状态的强有力的工具。鉴于计量学代谢通量分析在处理复杂代谢网络时表现出的局限性,发展了以13C标记实验为基础的13C MFA。本文介绍了13C MFA的原理与方法,总结和评述了13C MFA在实验与数据分析方面的最新进展以及MFA在功能基因组研究中的重要地位,同时对代谢通量分析的发展前景进行了展望。     

Imaging Magnetic Domain Structures with Soft X-Ray Microscopy

The current achievements in magnetic transmission soft X-ray microscopy will be reviewed. The magnetic contrast is given by X-ray magnetic circular dichroism (X-MCD), i.e., the dependence of the absorption coefficient of circularly polarized X rays on the projection of the magnetization in a ferromagnetic system onto the photon propagation direction. X-MCD contrast can reach, e.g., at L_2,3 edges in transition metals, large values up to 50%. Combined with a soft X-ray microscope where Fresnel zone plates acting as optical elements provide a lateral resolution down at 25 nm, it allows for imaging magnetic microstructures. Specific features of this photon-based technique are the recording of images in varying external magnetic fields, an inherent chemical specificity, a high sensitivity to thin magnetic layers, due to the large contrast, and the possibility to distinguish between in-plane and out-of plane contributions. In this report, recent results obtained with the XM-1 microscope at the ALS (Berkeley/CA) demonstrate the broad applicability of this novel experimental technique to both fundamental and technological relevant issues in nanomagnetism. The future potential will be briefly outlined.