Picosecond control of coherent magnetisation dynamics in permalloy thin films by picosecond magnetic field pulse shaping

We have measured the response of a 20×10 μm, 8 nm thin NiFe (80:20) permalloy film due to excitation by short in-plane magnetic field pulses. We will show that using a two-pulse-technique a complete control of the precessional motion of the magnetisation can be achieved on picosecond timescales. Furthermore, we will present numerical calculations which show that a complete suppression of magnetisation ringing after switching can only be realised by a cascade of short field pulses.     

Off-resonance frequency filtered magnetic resonance imaging

One of the main problems with rapid magnetic resonance imaging (MRI) techniques is the artifacts that result from off-resonance effects. The proposed off-resonance frequency filtered MRI (OFF-MRI) method focuses on the elimination of off-resonance components from the image of the observed object. To maintain imaging speed and simultaneously achieve good frequency selectivity, MRI is divided into two steps: signal acquisition and post-processing.     

Coalescence suppression in model immiscible polymer blends by nano-sized colloidal particles

The effect of nanometer sized silica particles (R16 nm) on the flow-induced morphology of immiscible polymer blends is studied. Polydimethylsiloxane (PDMS) and polyisobutylene (PIB) are chosen as model components. A stable droplet/matrix microstructure is obtained for blends of 30% PIB in 70% PDMS or vice versa. Rheological measurements are used to show that the silica particles alter the sensitivity of the of dispersed phase/matrix microstructure to shear flow. Coalescence is suppressed or at least slowed down on a practical time scale, especially when PDMS is the matrix phase. The effect of mixing conditions, pre-shear rate and particle concentration on the blend morphology are studied. Cryo-SEM is used to observe the accumulation of the particles at the interface. Blends stabilized by solid particles could provide an interesting alternative to blends compatibilized by block-copolymers.This paper was presented at the first Annual European Rheology Conference (AERC) held in Guimarães, Portugal, September 11-13, 2003.     

Silica surface controversies,strong adsorption sites,their blockage and removal. Part II

Summary In this second part of the review heterogeneity of the silica surface is described and evidence is presented for the existence of a low population of strong adsorption sites. Methods of detection and determination of these strongly interacting sites are discussed. The last part of the review is devoted to the suppression of unwanted adsorption activity. Methods of blockage and special methods for the preparation of HPLC packings are described.     

Inhibition of premixed and nonpremixed flames with phosphorus-containing compounds

The inhibition/extinction of various flames—premixed stoichiometric C₃H₈/air, nonpremixed counterflow CH₄/O₂/N₂, and nonpremixed coflow n-heptane/air cup-burner flames doped with a number of phosphorus-containing compounds (PCCs)—has been investigated experimentally. More than 20 PCCs (organic phosphates, phosphonates, phosphates) and their fluorinated derivatives were studied. All PCCs exhibited similar dependencies in burning velocities, extinction strain rates, and extinction volume fractions of CO₂ upon PCC loading in the range of mole fractions of 0–7000 ppm within an experimental deviation of ± 5%. This confirms that the inhibition effectiveness of the PCCs is influenced by the phosphorus content in the PCC molecule rather than by the structure of the molecule. The burning velocity of a stoichiometric C₃H₈/air mixture and the extinction strain rate of a nonpremixed counterflow CH₄/O₂/N₂ flame doped with trimethylphosphate were calculated. Satisfactory agreement between experimental and modeling results confirms the conclusion that the reactions of phosphorus oxyacids with radicals are responsible for flame inhibition.     

Temperature Sensitivity Control and Mechanical Stress Effect of Boron-Doped Long-Period Fiber Gratings

We will present in this work the quantitative analysis of the relationship between the doping concentrations of GeO 2 and B 2 O 3 in the core and cladding regions and the temperature sensitivity of the resonance wavelength shift in long-period fiber gratings (LPFGs). Based on this analysis, the temperature sensitivity was suppressed and enhanced to 0.002 nm/C and 0.28 nm/C, respectively. We will also discuss the effect of the residual mechanical stress on the optical and mechanical properties of LPFGs. In particular, we will present the measurement results of the dependence of the refractive index change and mechanical strength on the residual mechanical stress in the boron-doped fibers with depressed clad and matched clad.     

Reactive Polymer as Artificial Solid Electrolyte Interface for Stable Lithium Metal Batteries

Lithium (Li) metal anodes have the highest theoretical capacity and lowest electrochemical potential making them ideal for Li metal batteries (LMBs). However, Li dendrite formation on the anode impedes the proper discharge capacity and practical cycle life of LMBs, particularly in carbonate electrolytes. Herein, we developed a reactive alternative polymer named P(St-MaI) containing carboxylic acid and cyclic ether moieties which would in situ form artificial polymeric solid electrolyte interface (SEI) with Li. This SEI can accommodate volume changes and maintain good interfacial contact. The presence of carboxylic acid and cyclic ether pendant groups greatly contribute to the induction of uniform Li ion deposition. In addition, the presence of benzyl rings makes the polymer have a certain mechanical strength and plays a key role in inhibiting the growth of Li dendrites. As a result, the symmetric Li||Li cell with P(St-MaI)@Li layer can stably cycle for over 900 h under 1 mA cm⁻² without polarization voltage increasing, while their Li||LiFePO₄ full batteries maintain high capacity retention of 96 % after 930 cycles at 1C in carbonate electrolytes. The innovative strategy of artificial SEI is broadly applicable in designing new materials to inhibit Li dendrite growth on Li metal anodes.     

Hetero-/homogeneous combustion of hydrogen/air mixtures over platinum at pressures up to 10 bar

The hetero-/homogeneous combustion of fuel-lean hydrogen/air premixtures over platinum was investigated experimentally and numerically in the pressure range 1 bar  p  10 bar. Experiments were carried out in an optically accessible channel-flow catalytic reactor and included planar laser induced fluorescence (LIF) of the OH radical for the assessment of homogeneous (gas-phase) ignition, and 1-D Raman measurements of major gas-phase species concentrations for the evaluation of the heterogeneous (catalytic) processes. Simulations were performed with a full-elliptic 2-D model that included detailed heterogeneous and homogeneous chemical reaction schemes. The predictions reproduced the measured catalytic hydrogen consumption, the onset of homogeneous ignition at pressures of up to 3 bar and the diminishing gas-phase combustion at p  4 bar. The suppression of gaseous combustion at elevated pressures bears the combined effects of the intrinsic homogeneous hydrogen kinetics and of the hetero/homogeneous chemistry coupling via the catalytically produced water over the gaseous induction zone. Transport effects, associated with the large diffusivity of hydrogen, have a smaller impact on the limiting pressure above which gaseous combustion is suppressed. It is shown that for practical reactor geometrical confinements, homogeneous combustion is still largely suppressed at p  4 bar even for inlet and wall temperatures as high as 723 and 1250 K, respectively. The lack of appreciable gaseous combustion at elevated pressures is of concern for the reactor thermal management since homogeneous combustion moderates the superadiabatic surface temperatures attained during the heterogeneous combustion of hydrogen.     

Silica surface controversies,strong adsorption sites,their blockage and removal. Part I

Summary The review describes many different controversies concerning the surface chemistry of silica. The first part concerns the variable nature of alkyl bonded phases for HPLC, the physical requirements for silica and the role of silanols as adsorption centres. The existence of a small population of strong adsorption sites is pointed out and the reasons for the strong and undesirable adsorption discussed; the part played by trace metals in the silica matrix is emphasised.