Ultrahigh Loading Copper Single Atom Catalyst for Palladium-free Wacker Oxidation

Wacker oxidation is an industry-adopted process to transform olefins into value-added epoxides and carbonyls. However, traditional Wacker oxidation involves the use of homogeneous palladium and copper catalysts for the olefin addition and reductive elimination. Here, we demonstrated an ultrahigh loading Cu single atom catalyst(14% Cu, mass fraction) for the palladium-free Wacker oxidation of 4-vinylanisole into the corresponding ketone with N-methylhydroxylamine hydrochloride as an additive under mild conditions. Mechanistic studies by ¹⁸O and deuterium isotope labelling revealed a hydrogen shift mechanism in this palladium-free process using N-methylhydroxylamine hydrochloride as the oxygen source. The reaction scope can be further extended to Kucherov oxidation. Our study paves the way to replace noble metal catalysts in the traditional homogeneous processes with single atom catalysts.     

A new rule of vibration sampling for predicting acoustical radiation from rectangular plates

Structural surface velocity distribution is often used to predict structural borne sound radiation. However the sampling interval of velocity should be chosen carefully to increase the prediction accuracy and to reduce the system cost. In this paper, several factors affecting the sampling interval are theoretically analyzed and discussed for a vibrating baffled rectangular plate. A new rule for the determination of the sampling interval is formulated. Using this rule, the results from both numerical simulations and experiments may be explained well.     

介质加载环板慢波结构高频特性研究

 提出了一种适用于环板结构的计算等效相对介电常数的方法，利用变分法导出了介质加载环板慢波结构的色散方程和耦合阻抗表达式。计算结果表明，介质加载能够有效降低环板慢波结构的工作电压。计算结果与CST-MWS的模拟结果吻合良好，说明所提出的计算等效相对介电常数的方法和计算色散方程的方法对环板慢波结构是切实可行的。     

Photoluminescence linewidth broadening due to alloy/thickness fluctuation of CdxZn1 − xSe/ZnSe triple quantum wells

Photoluminescence (PL) linewidth broadening of Cd_xZn_{1 − x}Se/ZnSe triple quantum wells, grown on GaAs substrates by molecular beam epitaxy (MBE), has been investigated. Various quantum well (QW) samples have been prepared with different QW thickness and composition (Cd-composition). Measured and calculated PL linewidth are compared. Both composition and thickness fluctuations are considered for the calculation with the parameters such as the volume of exciton, nominal thickness and composition of QWs. Surface roughness measured by atomic force microscopy (AFM) is used to estimate the interface roughness. Results show that when Cd-composition increases additional linewidth broadening due to Zn/Cd interdiffusion is enhanced.     

Fractional Brownian Heavy Traffic Approximations of Multiclass Feedforward Queueing Networks

We consider multiclass feedforward queueing networks under first in first out and priority service disciplines driven by long-range dependent arrival and service time processes. We show that in critical loading the normalized workload, queue length and sojourn time processes can converge to a multi-dimensional reflected fractional Brownian motion. This weak heavy traffic approximation is deduced from a deterministic pathwise approximation of the network behavior close to constant critical load in terms of the solution of a Skorokhod problem. Since we model the doubly infinite time interval, our results directly cover the stationary case.AMS subject classification: primary 90B15, secondary 60K25, 68M20     

Investigation of annealing effects on the structural, magnetic and transport properties of Co/GaAs(0 0 1) thin films

Present paper deals with the structural, magnetic and transport studies of as-deposited as well as annealed Co/GaAs(0 0 1) thin film at different temperatures. The X-ray diffraction measurements show oriented growth of as-deposited Co film in the hcp (0 0 2) direction. However, the sample annealed at higher temperatures shows formation of ternary Co₂GaAs phase at the interface. Corresponding magnetic and transport measurements show decrement in magnetization and resistivity with annealing temperatures. The observed reductions in magnetization and resistivity values are mainly attributed to the formation of ternary Co₂GaAs phase at the interface.     

Structural and magnetic properties of RF sputtered FePt/Fe multilayers

Series of [FePt(4min)/Fe(t_Fe)]₁₀ multilayers have been prepared by RF magnetron sputtering and post-annealing in order to optimize their magnetic properties by structural designs. The structure, surface morphology, composition and magnetic properties of the deposited films have been characterized by X-ray diffractometer (XRD), Rutherford backscattering (RBS), scanning electron microscope (SEM), energy dispersive X-ray spectroscope (EDX) and vibrating sample magnetometer (VSM). It is found that after annealing at temperatures above 500 °C, FePt phase undergoes a phase transition from disordered FCC to ordered FCT structure, and becomes a hard magnetic phase. X-ray diffraction studies on the series of [FePt/Fe]_n multilayer with varying Fe layer thickness annealed at 500 and 600 °C show that lattice constants change with Fe layer thickness and annealing temperature. Both lattice constants a and c are smaller than those of standard ones, and lattice constant a decreases as Fe layer deposition time increases. Only a slight increase in grain size was observed as Fe layer decreased in samples annealed at 500 °C. However, the increase in grain size is large in samples annealed at 600 °C. The coercivities of [FePt/Fe]_n multilayers decrease with Fe layer deposition time, and the energy product (BH)_max reaches a maximum in the samples with Fe layer deposition time of 3 min. Comparison of magnetic properties with structure showed an almost linear relationship between the lattice constant a and the coercivities of the FePt phase.     

A novel specimen for investigating the mechanical behavior of elastomers under multiaxial loading conditions

In this paper we describe the design and manufacture of an axial-torsion test specimen, and provide relationships needed when conducting stress-strain characterization experiments with the specimen. The specimen is a short hollow cylinder of rubber bonded between two steel mounting rings, in which simultaneous axial and shear strains are produced via independently controlled axial and twist displacements. We present calculations for the strain-displacement and stress-load relationships, and strain energy density. These relationships have been established and validated via a combination of analytical and experimental techniques, and finite element analysis. We have investigated the extent and effects of strain and stress field non-uniformity in the test specimen. The specimen design is sufficiently simple that a closed-form expression for the strain-displacement relationship has been successfully developed.     

BELENE nuclear power plant numerical and experimental bedrock,layers and surface signals

An investigation of BELENE Nuclear Power Plant (NPP) free field signal is presented in the current study. An SH wave propagation trough multilayer geological media in the region is considered. An original structural model of the geological column has been developed. The investigated layers are isotropic, with constant depth and skyline parallel. The SH rays are with an arbitrary angle as far as the layers are concerned. The seismic SH waves have been generated by a special detonation device. The main results of the study are graphically illustrated. A comparison between the original BELENE NPP experimental and the numerical surface (free field) signals (obtained by the formulated direct problem) for the investigated geological column has been carried out and its results are hereby shown.     

Structural optimization design for large mirror

The system design must be started from the concept with low cost and high performance. In this point, the topological shape of the structure is very important in the view of the structural rigidities and light-weight design.In this paper, the optimization methodology is presented in the design stage of the large optical mirror. We obtain the optimal layout through the topology optimization and then design the details through the size or shape optimization for structural rigidity.