Steering forces on undriven tractor wheel

The steering forces on an undriven, angled wheel mounting a 6-16 8PR tire were measured on a wheel test carriage at zero camber angle and at 1.5 km/h forward speed in a soil bin with sandy clay loam soil. The lateral force developed was found to be a function of slip angle, normal load, and inflation pressure for a particular soil condition. An exponential relationship could estimate the coefficient of lateral force of the 6-16 tire. The coefficients of this equation were found to be linearly related to inflation pressure. Rolling resistance of the wheel tested was found to be a function of slip angle, normal load, and inflation pressure for the soil condition tested. A linear relationship existed between the rolling resistance and slip angle, where the coefficients were found to be a function of inflation pressure and normal load. The generalized equations developed in the present study for estimating coefficients of lateral force and rolling resistance by taking both the tire and operating parameters into account, were found to be reasonably good by looking at the high coefficient of determination between experimental and estimated values.     

Numerical analysis on tractive performance of off-road wheel steering on sand using discrete element method

This paper presents a numerical analysis on steering performance including tractive parameters and lug effects. To explore the difference between the turning and straight conditions of steering, a numerical sand model for steering is designed and appropriately established by the discrete element method on the basis of triaxial tests. From the point of mean values and variation, steering traction tests are conducted to analyze the tractive parameters including sinkage, torque and drawbar pull and the lug effects resulting from type, intersection and central angle. Analysis indicates that steering motion has less influence on the sinkage and torque. When the slip ratio exceeds 20%, the steering drawbar pull becomes increasingly smaller than in the straight condition, and the increase of steering radius contributes to a decline in mean values and a rise in variation. The lug effect of central angle is less influenced by the steering motion, but the lug intersection is able to significantly increase the steering drawbar pull along with the variation reduced. However, the lug inclination reduces the steering drawbar pull along with the variation raised in different degrees.     

基于LabWindows/CVI的导弹舵机测控系统设计

舵机是导弹控制系统的重要执行机构,为实现对电动及气动多种型号导弹舵机性能的测试,设计开发了一种基于LabWindows/CVI虚拟仪器的测控系统。介绍了该测控系统硬件组成和软件结构流程,软件设计过程中充分利用多线程、数据库等技术,准确快速完成舵机自动化性能测试。应用结果表明:该舵机测控系统工作稳定,测试精度和自动化程度高,满足舵机试验测试精度和技术指标要求,为舵机的性能研究和维修维护提供了良好的测试环境。     

An optimal method for the design of a robotic tracked vehicle to operate over fresh concrete under steering motion

The objective of this paper is to find an optimal method for the design of tracked base travel systems for special purpose vehicles and robotic machines that may be required to steer over a light bonded terrain composed of fresh concrete. For the case of a vehicle traveling on a weak fresh concrete during construction, the paper presents detailed comparative studies of the steering performances of a small model tracked test vehicle with alternative amount of steering ratio for various concrete slump values. For these studies a detailed simulation analytical method has been developed. From this work it is proven, in comparison to experiment, that the simulation analytical method is useful for predicting various steering performances of a test tracked vehicle running upon soft fresh concrete of various consistencies.     

Error analysis and a new steering law design for spacecraft control system using SGCMGs

Based on the singular value decomposition theory,this paper analyzed the mechanism of escaping/avoiding singularity using generalized and weighted singularity-robust steering laws for a spacecraft that uses single gimbal control moment gyros (SGCMGs) as the actuator for the attitude control system.The expression of output-torque error is given at the point of singularity,proving the incompatible relationship between the gimbal rate and the output-torque error.The method of establishing a balance between the gimbal rate and the output-torque error is discussed,and a new steering law is designed.Simulation results show that the proposed steering law can effectively drive SGCMGs to escape away from singularities.     

A tighter steering criterion using the Robertson–Schrödinger uncertainty relation

We consider quantum steering by non-Gausssian entangled states. The Reid steering criterion based on the Heisenberg uncertainty relation fails to detect steerability for many categories of such states. Here, we derive a tighter steering criterion using the Robertson–Schrödinger uncertainty relation. We show that our steering condition is able to detect steerability of several classes of non-Gaussian states such as entangled eigenstates of the two-dimensional harmonic oscillator, the photon subtracted squeezed vacuum state and the NOON state.     

A new contact & slip model for tracked vehicle transient dynamics on hard ground

This study presents a new general transient contact and slip model for tracked vehicles on hard ground which is simple, accurate, and in agreement with the test results to a satisfactory level. Simulating zero track speed instances become possible with the new contact/shear model which is the major proposed improvement in addition to more accurate results for transient steering and tractive inputs. The model represents a general tracked vehicle having rear or front sprockets, with parameters for center of gravity, wheel positions, number of wheels, and track-pretention. To calculate longitudinal and lateral forces, a transient shear model is used. Shear stress under each track pad is assumed to be a function of shear displacement. The contact time formulation used in shear displacement calculation is improved to gain accuracy for transient and zero track speed conditions.The model is implemented on the Matlab/Simulink platform and verified with a comprehensive program of road tests composed of transient steering and tractive/braking scenarios. The results of the simulations and the road tests are satisfactorily similar for both constant and transient input maneuvers. Moreover, sensitivity simulations for vehicle parameters are conducted to show that the model responses are inline with the expected vehicle dynamics behaviours.     

Numerical simulation of a 4WD–4WS tractor turning in a rice field

For the steady-state circular turning of a 4WD–4WS (4 wheel driven–4 wheel steered) tractor in a rice field, a numerical simulation was achieved. Equations of motion of this tractor were developed in a vehicle fixed x–y coordinate system. By comparing the calculated and measured results of acting forces on the tractor tires, this simulation was evaluated. Then, the characteristic parameters of the turning vehicle, which are the side slip angle and the yaw angular velocity of the vehicle center of gravity, were simulated in several combinations of the steering wheel angle and the forward speed. Also the same simulation applied to a 4WD–2WS tractor which had the same body as the 4WD–4WS tractor. The simulated results showed a clear difference of turnability between 4WS and 2WS. ©     

快速反射镜在像移补偿中的应用

本文提出了一种基于快速反射镜的像移补偿方法用于解决航空成像中的像移问题。首先通过计算航空相机在曝光时间内的像移速度证明了像移补偿的必要性;针对快速反射镜存在伺服模型不确定性的问题,设计了模型参考自适应控制器;最后通过实验验证了该算法的性能,结果显示:采用本算法后,快速反射镜的阶跃响应稳定时间降低了50%以上,在振动情况下快速反射镜的稳定精度都可以达到10μrad,精度比传统控制方案提升10倍以上。最终的像移补偿成像实验成功验证了基于快速反射镜的像移补偿方案有较高的工程应用价值。     

A skid steering model using the Magic Formula

The paper describes a computer model for predicting the steering performance and power flows of a notional skid steered tracked vehicle. The force/slip characteristics of the rubber track pads are calculated by means of the so-called Magic Formula. Relevant parameters for the Magic Formula are derived from the limited amount of data available from traction tests with a tracked vehicle on a hard surface. The computer model considers the vehicle in steady state motion on curves of various radii and allows for lateral and longitudinal weight transfer, roll and pitch motions and the effects of track tension forces. Vehicle dimensions, Magic Formula parameters and the equations of motion are set up in a Microsoft Excel spreadsheet and solutions obtained using the Solver routine. Model outputs are described in terms of driver control input and various power flows against lateral acceleration. Maximum lateral acceleration is generally limited by the available engine power. In some conditions the outer track sprocket could be transmitting almost twice the maximum net engine power. For vehicles with a single electric motor/inverter driving each sprocket, these units would need to be able to transmit these high intermittent powers.