Optimization of Transducer Location for Novel Non-Intrusive Methodologies of Diagnosis in Diesel Engines

The health monitoring has been studied to ensure integrity of design of engine structure by detection, quantification, and prediction of damages. Early detection of faults may allow the downtime of maintenance to be rescheduled, thus preventing sudden shutdown of machines. In cylinder pressure developed, vibrations and noise emissions data provide a rich source of information about condition of engines. Monitoring of vibrations and noise emissions are novel non-intrusive methodologies for which positioning of various transducers are important issue. The presented work shows applicability of these diagnosis methodologies adopted in case of diesel engines. The effects of changing various fuel injection parameters was analyzed. Scope of using non-intrusive technique has been analyzed by changing locations of microphone. Novelty of this worklies in exploring signal processing methods for various locations around the engine test set up. Various frequency ranges of contributing noise and vibration sources were identified. Time-Frequency analysis showed the onset of various cyclic. Based on the identification of various frequency bands, it is possible to device suitable filters in order to extract more information.     

水力机械内鲤鱼草鱼的压力损伤模拟试验

通过试验人工模拟水力机械内压力变化过程,测量压力时间变化,观察并解剖分析不同压力变化过程对鲤鱼和草鱼造成损伤的情况。试验发现,负压状态下的压力变化过程会对鱼的生存构成直接威胁,并得到了新型环保水力机械设计中应采用的压力时变导数极限值。     

In Situ Labeling and Distance Measurements of Membrane Proteins in E. coli Using Finland and OX063 Trityl Labels

In situ investigation of membrane proteins is a challenging task. Previously we demonstrated that nitroxide labels combined with pulsed ESR spectroscopy is a promising tool for this purpose. However, the nitroxide labels suffer from poor stability, high background labeling, and low sensitivity. Here we show that Finland (FTAM) and OX063 based labels enable labeling of the cobalamin transporter BtuB and BamA, the central component of the β-barrel assembly machinery (BAM) complex, in E coli. Compared to the methanethiosulfonate spin label (MTSL), trityl labels eliminated the background signals and enabled specific in situ labeling of the proteins with high efficiency. The OX063 labels show a long phase memory time (T_M) of ≈5 μs. All the trityls enabled distance measurements between BtuB and an orthogonally labeled substrate with high selectivity and sensitivity down to a few μm concentration. Our data corroborate the BtuB and BamA conformations in the cellular environment of E. coli.     

A novel rigid wheel for agricultural machinery applicable to paddy field with muddy soil

The working performance of agricultural machinery is largely determined by the walking performance of the wheel when driving in complex unstructured soil. However, the driving performance of existing wheels is not satisfactory for paddy field with muddy soil. The purpose of the current study is therefore to propose a novel rigid wheel for agricultural machinery which is applicable to paddy field with muddy soil. Firstly, a novel arc edge shaped wheel was designed based on the principles of mechanics on the ground. Then the driving performance of this arc edge shaped wheel was evaluated using FE modeling of interaction between rigid wheel and soil. Finally, the structure originally designed arc edge shaped wheel was improved according to FE modeling results, and this improved design was further evaluated by both FE simulation and prototype experiments. Both FE modeling and experimental results indicate that the improved arc edge shaped wheel proposed in this study has a good driving performance with regarding to wheel sinkage and soil reaction force. The proposed arc edge shaped wheel could be used as an effective component of rice harvester for paddy field with muddy soil.     

Nanoscale detection of faint machinery vibration using the NV center in diamond

We propose a novel method for detection of the faint machinery vibration at the nanometer resolution based on the spin magnetic resonant effect. A suspension magnet acts as a vibration sensor to transfer the vibration signals as the magnetic field fluctuation to excite the spin magnetic resonance. Due to the high sensitivity of the magnetic field of the nitrogen-vacancy center in diamond, the theoretical detection limit of mechanical vibration is as high as 5.7 nm, and the actual measurement resolution reached 12.8 nm, and proved the potential for further improvement to ∼pm resolution. The feasibility of this method is verified by dynamic tests. This method provides a novel approach for the detection of micro-mechanical vibrations.     

基于i.MX35的工程机械显示终端设计

工程机械显示终端是重要的人机交互界面,随着工程机械控制系统信息化和智能化水平的不断提高,对车载显示终端也提出了越来越高的要求。为了满足需求,研制了基于i.MX35的工程机械显示终端,该显示终端以i.MX35多媒体应用处理器为核心,采用CODESYS作为应用编程平台,实现了人机界面显示、CAN总线通信、摄像头视频采集、大容量数据存储等功能,具有显示性能强大、启动速度快、应用编程灵活、易于扩展等特点,可以广泛应用于各种工程机械控制系统中。     

A modeling concept of a mechanical system having a piecewise linear spring property for its diagnosis

Machine condition monitoring and fault diagnosis of rotating machinery are very important because of the wide use of rotating machinery in industry. Couplings and gears are used in many mechanical systems to connect elements and transmit power. The system is usually modeled as a single-degree-of-freedom system with a piecewise linear spring property, where the mass of main machine is only considered. In the present study, the dynamic behavior of a system with an unsymmetrical nonlinearity and a significant mass of the connecting part was investigated both experimentally and by numerical simulation. In the experiment, a 1/3 sub-harmonic oscillation was observed, but this oscillation was not found in the simulation using a single-degree-of-freedom system, in which the mass of the connecting part was ignored. However, when a two-degrees-of-freedom system was used that considered both the mass of the connecting part and the impact property, the 1/3 sub-harmonic oscillation was observed. Thus it is recognized that an adequate mathematical model for diagnosis in the early stage of abnormality must be selected on the basis of the mass ratio between the connecting part and the main body.     

A preliminary step toward molecular spring driven by cooperative guest binding

A macrocyclic host molecule that comprised two different rotating modules, cerium(IV) bis(porphyrinate)s and ferrocenyl rotating units, exhibiting contraction/expansion motion was synthesized, which can be regarded as a prototype of artificial molecular spring driven by cooperative guest binding in 1:6 stoichiometry.     

Laboratory optimization of the soil digging process

A new idea for the optimization of digging using earth-working machinery is presented and experimentally verified. This idea is based on the conclusions derived from previous papers presented by the same authors, that the soil cutting trajectories incorporating the generated shear band as a part of them are the optimal ones. Dividing the whole excavation task into several repeatable cycles for which the soil free boundary before and after the experiment are similar the optimization of a single cycle plays a significant role in the energetic efficiency of the whole task. A single cycle of the working process is defined using several basing parameters. The influence of each parameter on the specific unit energy of the process was experimentally verified. Finally, a set of values for the discussed parameters is recommended for the particular soil and tool shape.     

基于向后逐步回归模型的我国农机需求特征及影响因素研究

以2004-2014年数据为样本,以农机总动力为因变量,以农机购置补贴、农机价格、农机作业服务价格、农户人均纯收入、农产品价格、农业劳动力数量和农作物播种总面积为自变量构建了我国农机需求影响因素的回归方程,向后逐步回归结果表明:(1)除农作物播种总面积、农机作业服务价格、农产品价格之外,其余变量对农机总动力的影响均统计上显著;(2)农机购置补贴、农机价格指数、农户人均纯收入及农业劳动力四个变量对农机需求的弹性系数分别为0.027、-0.004、0.457、0.474。最后根据研究结果提出加大与落实农机购置补贴、规范农机价格、培育新型经营主体、加速土地规范流转等政策建议。