Elongating the area of plasma/fluid interaction of surface nanosecond pulsed discharges

Plasma-assisted flow control is of high industrial interest, but practical applications at full scale require a large surface of interaction. Nanosecond pulsed Dielectric Barrier Discharge (DBD) have demonstrated promising results of flow control, but their interacting region is limited to only a few cm². In this paper, the conditions to extend a surface nanosecond DBD are documented. It is shown that a sliding discharge regime can fully fill an inter-electrode distance of 40 mm. This discharge regime promotes the formation of two hemispheric pressure waves originating from both air-exposed electrodes while an horizontal region of pressure gradient is also observed.     

滤波器对偏振模色散的补偿

根据耦合非线性薛定谔方程 ,本文研究了偏振模色散如何影响各种码型的频谱 ,分析了滑频滤波器和固定滤波器对偏振模色散的补偿作用。研究结果表明 :偏振模色散对不同码型的频谱影响是不一样的 ,对色散管理孤子的频谱影响最大 ,产生新的频率分量也最多 ,而且每个新频率分量都较强 ,比入射频谱展宽许多 ;滑频滤波器和固定滤波器对偏振模色散都具有补偿作用 ,使最大可传输距离成倍增加 ,两种滤波器对偏振模色散的补偿作用相差较小 ;但是对色散管理孤子系统中的偏振模色散补偿效果最佳。     

Compact directed acyclic word graphs for a sliding window

Suffix trees are a well-known and widely-studied data structure highly useful for string matching. The suffix tree of a string w can be constructed in O(n) time and space, where n denotes the length of w. Larsson achieved an efficient algorithm to maintain suffix trees for a sliding window. It contributes to prediction by partial matching (PPM) style statistical data compression scheme. Compact directed acyclic word graphs (CDAWGs) are a more space-economical data structure for indexing strings. In this paper we propose a linear-time algorithm to maintain CDAWGs for a sliding window.     

A Nonconforming Arbitrary Quadrilateral Finite Element Method for Approximating Maxwell's Equations

The main aim of this paper is to provide convergence analysis of Quasi-Wilson nonconforming finite element to Maxwell's equations under arbitrary quadrilateral meshes.The error estimates are derived,which are the same as those for conforming elements under conventional regular meshes.     

Nonlinear modelling and control of a common rail injection system for diesel engines

Modern trends in designing mechatronic systems call for a synergic design of the separated subsystems (mechanic, electronic parts, control modules, etc.) concurring to the overall performance. Following this point of view, this paper presents a control oriented model and a nonlinear control design for a Common Rail injection system. First a model is developed, which is tuned in a virtual simulation environment, representing the injection system in details in a reliable replication of reality. Then a sliding mode control is developed. Both the model of the injection process and of the control law are validated by a virtual detailed simulation environment. The prediction capability of the model and the control efficiency are clearly shown.     

An algebraic multigrid solver for Navier-Stokes problems

An efficient numerical method is presented for solving the equations of motion for viscous fluids. The equations are discretized on the basis of unstructured finite element meshes and then solved by direct iteration. Advective fluxes are temporarily fixed at each iteration to provide a linearized set of coupled equations which are then also solved by iteration using a fully implicit algebraic multigrid (AMG) scheme. A rapid convergence to machine accuracy is achieved that is almost mesh-independent. The scaling of computing time with mesh size is therefore close to the optimum.     

Characterization of strongly interacted multiple cracks in an infinite plate

Based on the Kachanov method and the alternating iteration technique, a new method is proposed to deal with the problem of the strongly interacted multiple cracks in an infinite plate. Unlike the Kachanov method which neglects the interaction of the tractions of the non-uniform components, the tractions of the non-uniform components on the surfaces of cracks are considered through the alternating technique. The accuracy and efficiency of present method are validated by comparing the results of two collinear and two parallel overlapped open the cracks obtained by the present method with those of the exact solutions, the results of the Kachanov method and the alternating iteration technique. Applications of present method in solving sliding close crack problems and evaluating the plastic zones demonstrate the versatility of present method.     

Simulation of single‐ and two‐phase flows on sliding unstructured meshes using finite volume method

The paper presents an efficient finite volume method for unstructured grids with rotating sliding parts composed of arbitrary polyhedral elements for both single‐ and two‐phase flows. Mathematical model used in computations is based on the ensemble averaged conservation equations. These equations are solved for each phase and in case of single‐phase flow reduce to the transient Reynolds‐averaged Navier–Stokes (TRANS) equations. Transient flow induced by rotating impellers is thus resolved in time. The use of unstructured grids allows an easy and flexible meshing for the entire flow domain. Polyhedral cell volumes are created on the arbitrary mesh interface placed between rotating and static parts. Cells within the rotating parts move each time step and the new faces are created on the arbitrary interfaces only, while the rest of the domain remain ‘topologically’ unchanged. Implicit discretization scheme allows a wide range of time‐step sizes, which further reduce the computational effort. Special attention is given to the interpolation practices used for the reconstruction of the face quantities. Mass fluxes are recalculated at the beginning of each time step by using an interpolation scheme, which enhances the coupling between the pressure and velocity fields. The model has been implemented into the commercially available CFD code AVL SWIFT (AVL AST, SWIFT Manual 3.1, AVL List GmbH, Graz, Austria, 2002). Single‐phase flow in a mixing vessel stirred by a six‐bladed Rushton‐type turbine and two‐phase flow in aerated stirred vessel with the four‐blade Rushton impeller are simulated. The results are compared with the available experimental data, and good agreement is observed. The proposed algorithm is proved to be both stable and accurate for single‐phase as well as for the two‐phase flows calculations. Copyright 2004 John Wiley & Sons, Ltd.     

Maximum-norm error analysis of a non-monotone FEM for a singularly perturbed reaction-diffusion problem

A non-monotone FEM discretization of a singularly perturbed one-dimensional reaction-diffusion problem whose solution exhibits strong layers is considered. The method is shown to be maximum-norm stable although it is not inverse monotone. Both a priori and a posteriori error bounds in the maximum norm are derived. The a priori result can be used to deduce uniform convergence of various layer-adapted meshes proposed in the literature. Numerical experiments complement the theoretical results. AMS subject classification (2000)  65L10, 65L50, 65L60     

An $L^{\infty}$ Second Order Cartesian Method for 3D Anisotropic Interface Problems

A second order accurate method in the infinity norm is proposed for general three dimensional anisotropic elliptic interface problems in which the solution and its derivatives, the coefficients, and source terms all can have finite jumps across one or several arbitrary smooth interfaces. The method is based on the 2D finite element-finite difference (FE-FD) method but with substantial differences in method derivation, implementation, and convergence analysis. One of challenges is to derive 3D interface relations since there is no invariance anymore under coordinate system transforms for the partial differential equations and the jump conditions. A finite element discretization whose coefficient matrix is a symmetric semi-positive definite is used away from the interface; and the maximum preserving finite difference discretization whose coefficient matrix part is an M-matrix is constructed at irregular elements where the interface cuts through. We aim to get a sharp interface method that can have second order accuracy in the point-wise norm. We show the convergence analysis by splitting errors into several parts. Nontrivial numerical examples are presented to confirm the convergence analysis.