Electrical properties and Schottky diodes using N-N′diphenyl-1-4phenylenediamine

Thin films of, N-N′diphenyl 1-4phenylene-diamineane are prepared using vacuum sublimation technique. The electrical conductivity from room temperature down to 127 K is studied. It is found that the conduction of charge carriers obeys T^−1/2 dependence on temperature. The average hopping distance, hopping energy, density of states and their variation due to post-deposition heat treatment are studied. Schottky diodes are fabricated with gold as ohmic contact and aluminium as Schottky contact. From the observed current voltage characteristics the saturation current density, diode ideality factor and the barrier height are determined. Their variation with air annealing is also investigated.     

On the electron energy spectrum in heavily doped non-parabolic semiconductors

An attempt is made to present a simple theoretical analysis of the energy-wave vector dispersion relation of the conduction electrons in heavily doped non-parabolic semiconductors forming band tails. We observe that the complex energy spectrum in doped small-gap materials whose unperturbed conduction band is described by the three band model of Kane is due to the interaction of the impurity atoms in the tail with the spin-orbit splitting constant of the valence band (Δ), For band-gap (E_g)<Δ the imaginary part predominates which tails in to the conduction band. For the opposite inequality the real part comes in to play which tails in to the split-off band. In the absence of the band tailing effect, the imaginary part of the complex energy spectrum vanishes and the same is also true for doped two-band Kane-type and parabolic energy bands respectively. The present formulation helps us in investigating the Boltzmann transport equation dependent transport properties of degenerate semiconductors and are expected to agree better with experiments. The well-known results of unperturbed three and two band models of Kane together with wide-gap parabolic energy bands have been obtained as special cases of our generalized analysis under certain limiting conditions.     

Hydrodynamical limit for a drift-diffusion system modeling large-population dynamics

In this paper we study the stability of the following nonlinear drift-diffusion system modeling large population dynamics ∂_tρ+div(ρU−ε∇ρ)=0, divU=±ρ, with respect to the viscosity parameter ε. The sign in the second equation depends on the attractive or repulsive character of the field U. A proof of the compactness and convergence properties in the vanishing viscosity regime is given. The lack of compactness in the attractive case is caused by the blow-up of the solution which depends on the mass and on the space dimension. Our stability result is connected, depending of the character of the potentials, with models in semiconductor theory or in biological population.     

The effects of O deficiency on the electronic structure of rutile TiO2

Ab initio density functional calculations (plane wave GGA, CASTEP) were performed to determine the effect of O deficiency on the electronic structure of rutile, TiO₂. O deficiency was introduced through either the removal of O or the insertion of interstitial Ti atoms. At physically realistic concentrations of O vacancies in the rutile lattice (i.e. 25% and less) O deficiency results in the population of the bottom of the conduction band, the location of the Ti 3d orbitals in the pure structure, increasingly with increasing vacancy concentration. We propose that this could be confused with the formation and population of gap states especially where O vacancies occur in isolated positions in the lattice. In contrast, Ti interstitials introduce a defect state into the energy gap, without an overall reduction in the size of the energy gap. O vacancies result in a spin polarized solution, whereas Ti interstitials do not.     

Self-assembly of doped semiconductor nanocrystals leading to the formation of highly luminescent nanorods

Meso-scale self-assembly of doped semiconductor nanocrystals leading to the formation of monocrystalline nanorods showing enhanced photo- and electro-luminescence properties are reported. Polycrystalline ZnS: Cu⁺-Al³⁺ nanoparticles of zinc-blended (cubic) structure with an average size of ∼4 nm were aggregated in aqueous solution and grown into nanorods of length ∼400 nm and aspect ratio ∼12. Transmission electron microscope (TEM) images indicate crystal growth mechanisms involving particle-to-particle oriented-attachment assisted by sulphur-sulphur catenation leading to covalent-linkage. The nanorods exhibit self-assembly dependant luminescence properties such as quenching of the lattice defect-related emissions accompanied by enhancement of dopant-related emission, efficient low-voltage electroluminescence (EL) and super-linear voltage-brightness EL characteristics. This study demonstrates the technological importance of aggregation based self-assembly in doped semiconductor nanosystems.     

Preparation, characterization and photocatalytic activity of polycrystalline Bi2O3/SrTiO3 composite powders

Bi₂O₃/SrTiO₃ composite powders have been prepared and their photocatalytic activities were investigated by photooxidation of methanol. These powders were characterized by UV-Visible diffuse reflectance spectra, SEM and X-ray diffraction (XRD). The results revealed that all the Bi₂O₃/SrTiO₃ composite powders exhibited higher photocatalytic activity than pure SrTiO₃, Bi₂O₃ and TiO₂ (P25) under visible light irradiation (λ>440 nm). The effects of the Bi₂O₃ contents on the photocatalytic activities of the composite powders were examined, the photocatalytic activities increased with the content of Bi₂O₃ increasing to a maximum of 83% and then decreased under visible light irradiation. The effects of the calcination temperatures on the photocatalytic activities of the composite powders were also investigated.     

Properties of sol-gel dip-coated zinc oxide thin films

Zinc oxide (ZnO) films were deposited on glass substrates by the sol-gel dip coating method using acrylamide route. The films were characterized by X-ray diffraction studies which indicated wurtzite structure. Optical absorption measurements indicated band gap in the range 3.17-3.32 eV. XPS studies indicated the formation of ZnO. The resistivity of the films were in the range 1000-10,000 ohm cm.     

Co-doped In2O3 thin films: Room temperature ferromagnets

Laser-ablated Co-doped In₂O₃ thin films were fabricated under various growth conditions on R-cut Al₂O₃ and MgO substrates. All Co:In₂O₃ films are well-crystallized, single phase, and room temperature ferromagnetic. Co atoms were well substituted for In atoms, and their distribution is greatly uniform over the whole thickness of the films. Films grown at 550 °C showed the largest magnetic moment of about 0.5 μ_B/Co, while films grown at higher temperatures have magnetic moments of one order smaller. The observed ferromagnetism above room temperature in Co:In₂O₃ thin films has confirmed that doping few percent of magnetic elements such as Co into In₂O₃ could result in a promising magnetic material.     

Atomic scale properties of interior interfaces of semiconductor heterostructures as determined by quasi-digital highly selective etching and atomic force microscopy

We report on first experiments combining quasi-digital highly selective etching and atomic force microscopy (AFM) to examine the interior interfaces of semiconductor heterostructures. Lattice matched (GaIn)As/InP heterostructures grown by metalorganic vapour-phase epitaxy (MOVPE) are taken as a model system to check the capabilities of this new method. Standard selective etchants for different material systems have been optimized in selectivity and etch rate to achieve a quasi-digital etching behaviour. In this way, the real structure of interior interfaces can be determined by AFM. We find a significant difference between the surface of the heterostructure and the interior interfaces.