An Experimental Investigation into the Acoustic Characteristics of Fluid-filled Porous Structures—A Simplified Model of the Human Skull Cancellous Structure

In nature, shape and structure evolve from the struggle for better performance. Often, biological structures combine multiple beneficial properties, making research into mimicking them very complex. Presented here is a summary of observations from a series of experiments performed on a material that closely resembles the human skull bone’s cancellous structure under acoustic loads. Transmission loss through flat and curved open-cell polyurethane foam samples is observed using air and water as the two interstitial fluids. Reduction in strength and stiffness caused by porosity can be recovered partially by filling the interstitial pores with a fluid. The test findings demonstrate the influence of the interstitial fluid on the mechanical characteristics of a porous structure in a quantitative manner. It is also demonstrated that the transmission loss does not depend only on the mass per unit area of the structure as predicted by acoustic mass law. Current tests also demonstrate that the transmission loss is more sensitive to the interstitial fluid than the shape and support conditions of the structures. Test observations thus support the concepts of “moisture-sensitivity of biological design” and the “law of hierarchy in natural design”.     

声波团聚净化尿素造粒塔尾气实验研究*

尿素造粒塔大多采用水洗工艺处理尾气粉尘,存在较为严重的细颗粒粉尘溢出和水汽拖尾问题,因此深入探究声波团聚技术在造粒塔尾气处理方面的应用。通过实验研究了声波与喷雾对除尘效率的影响,发现声波单独作用时在3500 Hz达到最佳除尘效率,为74.49%,协同喷雾时2600 Hz即可实现相近的除尘效率,为73.83%。进一步探究其中机理,采用以粒径测试为依据的团聚效率作为评价指标,结果显示,2600 Hz声波与喷雾单独作用时团聚效率分别为30.37%和28.82%,协同作用时团聚效率大幅提升至57.95%。该研究可为后续造粒塔工程改造提供理论与数据支持。     

基于有限元模拟的超声应力系数标定及分析*

应力系数的标定作为超声应力检测最为关键的环节,直接决定应力检测结果的准确性。传统的应力系数试验标定对于被测物的表面粗糙度、耦合剂厚度、声匹配块与被测物接触力等因素十分敏感,但缺少基本参照值。基于COMSOL建立多物理场耦合的超声应力检测模型,施加不同的拉伸载荷,计算临界折射纵波到达时间与不同应力值之间的关系,模拟标定45#钢的超声应力系数为13.7MPa/ns。单轴水平拉伸试验标定的45#钢应力系数为16.5MPa/ns。结果表明,通过两种方法标定的应力系数较为接近,试验标定的应力系数偏大,这是由于有限元方法能够消除试验过程中各种不确定因素对声时精确测量所造成的影响,能够更加纯粹的反映材料的声弹性效应,因此具有作为基础数据的参考价值。有限元方法作为传统试验方法的补充,可以减小试验标定数据的离散性,提高超声应力检测结果的可信度。     

Construction of self-assembled monolayer terminated with N-heterocyclic carbene-rhodium(I) complex moiety

Functionalization of self-assembled monolayer (SAM) of alkanethiolate with metal containing unit is one of the versatile methods to obtain functional surfaces such as heterogeneous catalysts. However, organic molecules that strongly bind to transition metals at SAM terminal are limited. Recently N-heterocyclic carbenes (NHCs) such as cyclic diaminocarbenes have emerged as strongly σ-donating ligands forming a robust bond with broad spectrum of transition metals. In the present study, for the purpose of establishment of a new robust basement for heterogeneous metal catalysts, a SAM of the alkanethiolate terminated with NHC-rhodium(I) complex moiety was prepared by utilizing a newly designed disulfide molecule bearing NHC-metal complex terminals. X-ray photoelectron spectroscopy (XPS) analysis and angle resolved XPS measurement revealed successful formation of the Rh-complex-terminated SAM on a gold substrate. Infrared reflection absorption spectroscopy (IRRAS) analysis suggested that the linker methylene chains connecting the rhodium complex moiety and the gold surface are in a loosely packed structure. This unique chemical species, NHC, would be a promising candidate as a basement for the construction of functional surface.     

Adsorbate motions induced by vibrational mode coupling

Adsorbate motions are discussed with a primary attention focused on the coupling between a vibrational mode excited by ultrafast laser heated hot-electrons or by inelastic tunneling electrons with scanning tunneling microscope and the reaction coordinate (RC) mode. Recent experimental results have demonstrated an efficient reaction pathways involving an indirect excitation of a frustrated translational mode, rather than its direct excitation for adsorbate hopping on surfaces. Elementary processes are briefly described for hopping of CO molecules on a laser heated stepped Pt surface, where excitation of the frustrated rotation mode has been found to plays an indispensable. Calculation of the inelastic tunneling current (ITC) for excitation of the C-O stretch mode of a CO molecule is combined with a theory of anharmonic mode coupling to activate the frustrated translation mode above the barrier. The hopping rate as a function of the bias voltage agrees with the experimental result. An unified theory of single-, and two-electron processes for ITC-induced motions induced by an indirect excitation of the RC-mode via mode coupling is also applied to reproduce a crossover from hopping to desorption of a single NH₃ molecule on Cu(1 0 0) with an increase in the tunneling current.     

Acoustic scattering characteristics of a thick-walled orthotropic cylindrical shell at oblique incidence

The method of wave function expansion is adopted to study the scattering of a plane harmonic acoustic wave incident at an arbitrary angle upon an arbitrarily thick cylindrically orthotropic homogeneous cylindrical shell submerged in and filled with compressible ideal fluids. A laminate approximate model and the so-called state space formulation in conjunction with the classical transfer matrix (T-matrix) approach are employed to present an analytical solution based on the three-dimensional exact equations of anisotropic elasticity. The solution is used to correlate the perturbation in the material elastic constants of an air-filled and water-submerged aluminium cylindrical shell to the sensitivity of resonances associated with various modes of wave propagation appearing in the backscattered amplitude spectrum (i.e., axially guided, Lamb, Rayleigh and Whispering Gallery waves). The effects of shell wall thickness as well as inner fluid loading on the frequency response of the shell are also examined. A limiting case is considered and good agreement with the solution available in the literature is obtained.     

Evaluation of Support in Singing

This study searched for perceptual, acoustic, and physiological correlates of support in singing. Seven trained professional singers (four women and three men) sang repetitions of the syllable [pa:] at varying pitch and sound levels (1) habitually (with support) and (2) simulating singing without support. Estimate of subglottic pressure was obtained from oral pressure during [p]. Vocal fold vibration was registered with dual-channel electroglottography. Acoustic analyses were made on the recorded samples. All samples were also evaluated by the singers and other listeners, who were trained singers, singing students, and voice specialists without singing education (a total of 63 listeners). We rated both the overall voice quality and the amount of support. According to the results, it seemed impossible to observe any auditory differences between supported singing and good singing voice quality. The acoustic and physiological correlates of good voice quality in absolute values seem to be gender and task dependent, whereas the relative optimum seems to be reached at intermediate parameter values.     

Optically detected nuclear magnetic resonance at the sub-micron scale

Nuclear magnetic resonance is arguably one of the most powerful techniques available today to characterize diverse systems. However, the low sensitivity of the standard detection method constrains the applicability of this technique to samples having effective dimensions not less than a few microns. Here, we propose a novel scheme and device for the indirect detection of the nuclear spin signal at a submicroscopic scale. This approach--for which the name Dipolar Field Microscopy is suggested--is based on the manipulation of the long-range nuclear dipolar interaction created between the sample and a semiconductor tip located close to its surface. After a preparation interval, the local magnetization of the sample is used to modulate the nuclear magnetization in the semiconductor tip, which, in turn is determined by an optical inspection. Based on results previously reported, it is shown that, in principle, images and/or localized high-resolution spectra of the sample can be retrieved with spatial resolution proportional to the size of the tip.     

Low voltage electrodeposition of CNx films and study of the effect of the deposition voltage on bonding configurations

Carbon nitride (CN_x) films were deposited from acetonitrile at low voltage (150-450 V) through electrodeposition. The films were characterized by atomic force microscopy (AFM), Raman spectroscopy and Fourier transform infrared (FT-IR) spectroscopy. AFM investigations revealed that the grain size was ∼200 nm and roughness was ∼10 nm. The films were found to be continuous and close packed. IR spectra revealed existence of strong sp³, sp² type bonding and weak sp type carbon nitrogen bonds and these bonds were found to increase with voltage. The fraction of sp³-bonded species in the sample increased in low voltage range and after reaching maximum at 350 V, decreased for higher voltages. However, the concentration of sp² CN ring structures in the film increased with increasing voltage. Also, the peak width decreased at low voltages reaching a minimum and increased thereafter. It was observed that the voltage dependent increase in the concentration of polymeric type sp² CN (chain) structures was much more pronounced than that of graphitic type sp² CN (ring) structures. Raman spectra showed the presence of both the D and G bands. The shift in the G band indicated the presence of nitrogen in the film. The I_D/I_G ratio was found to increase with the incorporation of nitrogen. Auger electron spectroscopy (AES) showed a clear increase in the nitrogen content with increase in the voltage. The formation of the film could be explained on the basis of dissociation of electrolyte under applied voltage.     

Measurement of acoustic particle velocities in enclosed sound field: Assessment of two Laser Doppler Velocimetry measuring systems

The performances of two Laser Doppler Velocimetry (LDV) systems adapted for measuring the acoustic particle velocities are assessed in enclosed sound field. This assessment is performed by comparing the acoustic velocities measured by means of LDV to reference acoustic velocities estimated from sound pressure measurements. The two LDV systems are based on a single optical bench which delivers an optical signal called Doppler signal. The Doppler signal, which is frequency modulated, is analyzed by means of two signal processing systems, the BSA (Burst Spectrum Analyser from Dantec) on the one hand, and a system specifically developed for the estimation of the acoustic velocity on the other hand. Once the experimental setup has been optimized for minimizing the errors made on the reference velocities, the assessment is performed and shows that both systems can measure the acoustic velocity in enclosed field in two the frequency ranges [0-4 kHz] and [0-2 kHz] respectively for acoustic velocity amplitudes of 10 mm/s and 1 mm/s.