Numerical solutions of the shallow water equations with discontinuous bed topography

A simple scheme is developed for treatment of vertical bed topography in shallow water flows. The effect of the vertical step on flows is modelled with the shallow water equations including local energy loss terms. The bed elevation is denoted with z_b^‐ for the left and z_b⁺ for the right values at each grid point, hence exactly representing a discontinuity in the bed topography. The surface gradient method (SGM) is generalized to reconstruct water depths at cell interfaces involving a vertical step so that the fluxes at the cell interfaces can accurately be calculated with a Riemann solver. The scheme is verified by predicting a surge crossing a step, a tidal flow over a step and dam‐break flows on wet/dry beds. The results have shown good agreements compared with analytical solutions and available experimental data. The scheme is efficient, robust, and may be used for practical flow calculations. Copyright © 2002 John Wiley & Sons, Ltd.     

Two-dimensional numerical calculation of the flow field about a scoop inlet by the piecewise linear method

The piecewise linear method (PLM) based on time operator splitting is used to solve the unsteady compressible Euler equations describing the two-dimensional flow around and through a straight wall inlet placed stationary in a rapidly rotating supersonic flow. The PLM scheme is formulated as a Lagrangian step followed by an Eulerian remap. The inhomogeneous terms in the Euler equations written in cylindrical coordinates are first removed by Sod's method and the resulting set of equations is further reduced to two sets of one-dimensional Lagrangian equations, using time operator splitting. The numerically generated flow fields are presented for different values of the back pressure imposed at the downstream exit of the inlet nozzle. An oblique shock wave is formed in front of the almost whole portion of the inlet entrance, the incoming streamlines being deflected towards the higher pressure side after passing through the oblique shock wave and then bending down to the lower pressure side. A reverse flow appears inside the inlet nozzle owing to the recovery pressure of the incoming streams being lower than the back pressure of the inlet nozzle.     

Plasticity field adjacent to faces of asperities on a rotating roll after initial indentation into a half-space

The plastic deformation field near the horizontal surface of a half space of perfectly plastic material associated with an indenting rotating rigid tooth is studied using slip line theory. The tooth is one of many on a roll surface and indents first into the half-space material and then rotates about the roll center. A slip line field is proposed for the deforming plastic region and a solution scheme is outlined. The emphasis is on determining the shape of the deforming region, especially that of the free surface. The study has a potential application in roughness transfer in metal forming processing.     

Condensation film on an inclined rotating disk

The three dimensional problem of steady fluid deposition on an inclined rotating disk is solved by similarity transform. For a given spraying rate there may be one, two or no steady state solution. The inclination causes a downward draining flow and a lateral flow. Perturbation solutions compare well with exact similarity solutions when the fluid film is thin.     

Unsteady MHD flow of a non-Newtonian fluid on a porous plate

This paper deals with the study of the MHD flow of non-Newtonian fluid on a porous plate. Two exact solutions for non-torsionally generated unsteady hydromagnetic flow of an electrically conducting second order incompressible fluid bounded by an infinite non-conducting porous plate subjected to a uniform suction or blowing have been analyzed. The governing partial differential equation for the flow has been established. The mathematical analysis is presented for the hydromagnetic boundary layer flow neglecting the induced magnetic field. The effect of presence of the material constants of the second order fluid on the velocity field is discussed.     

Underbody and ground effects on rotating disc flow: a global scale inviscid study

The flow induced by a finite disc rotating near horizontal ground is considered, including the effects of an underbody. This paper concentrates on determining the shape of the free layer beyond the rim of the disc which is horizontal in the absence of the underbody and ground but forced to deform to ensure that conditions across the layer are satisfied when the underbody or ground is added. The far-field behaviour, the inviscid flow produced by a nominally infinite disc near the ground and the global solution for small ground clearances are considered analytically, and the full problem is posed as an integral problem. This is then solved numerically and analytically. Results are presented for various heights of the disc above the ground and for discs with an axisymmetric underbody present. A universal form is found for the farfield shape (which is controlled by entrainment into the free layer) but both the underbody and the ground effects are found to increase very significantly for reduced clearances.     

Power scaling of printed-circuit-board preionized TEA CO2 laser up to 3.6 kW

A high average power, high-repetition-rate TEA CO₂ laser employing printed-circuit-board preionizer is described. The power scaling of this preionization configuration has been demonstrated. The average output power reaches 3.6 kW at pulse repetition rate of 180 pps. Furthermore, the scaling-up ability of the rotating spark gap as high-voltage switch for high-average-power gas laser has been validated.     

A new type of two-dimensional packed + capillary column GC system. I. Theory

Summary To match the need of high efficiency capillary column (plate number N₂, Plate height H₂ and carrier gas linear velocity U₂), a new high efficiency packed column (N₁, H₁ and U₁) at high carrier gas velocity with small capacity factor has been developed in the light of theoretical discussion of factors effecting the column efficiency utilization ratio.     

Study on the electroreduction of In(III) ions at gold from acidic bromide solutions by the rotating ring-disc electrode technique

The mechanism of the indium electrodeposition on gold from acidic KBr solutions has been investigated by means of the rotating ring-disc electrode technique. The measurements showed that the overall electrode reaction In(III) + 3 e In consists of two successive charge transfer steps, i.e. In(III) + 2 e In(I) and In(I) + e In, with soluble monovalent indium as an intermediate. The current efficiency for In(I) generation under steady-state conditions is 100% in the case of low disc current densities. The disproportionation of In(I) in the bulk of solution occurs in slightly acidified solutions,pH=2, in addition to the In(I) electrochemical reduction. Based on the ring current transients, it was established that the two-electron transfer step is preceded by the formation of a thin passive film of indium metal.

---

Untersuchung der elektrochemischen Reduktion von In(III)-Ionen an Gold in sauren Bromidlösungen mit der rotierenden Ring-Scheiben-Elektrode

Zusammenfassung Mit Hilfe der rotierenden Ring-Scheiben-Elektrode wurde der Mechanismus der kathodischen Abscheidung von Indium auf Gold in sauren KBr-Lösungen untersucht. Aus den Messungen folgt, daß die Bruttoreaktion In(III) + 3e In über zwei aufeinanderfolgende Durchtrittsreaktionen, In(III) + 2 e In(I) und In(I) + e In, mit löslichem einwertigem Indium als Zwischenprodukt abläuft. Bei kleinen Stromdichten werden die In(I)-Ionen mit 100%iger Stromausbeute erzeugt. In schwächer sauren Lösungen (pH=2) konnte außer der elektrochemischen Reduktion von In(I) zusätzlich dessen Disproportionierung innerhalb der Lösung ermittelt werden. Auf Grund der Ringstrom-Zeit-Kurven wurde auch festgestellt, daß die Bildung von einer dünnen In-Metallschicht, die ein passives Verhalten aufweist, dem Zweielektronenübergang vorangegangen ist.