Loss in a rectangular optical waveguide induced by the crossover of a second waveguide

We calculate the loss induced in a single-mode rectangular optical waveguide by the presence of a second waveguide, perpendicular to the first, which crosses over the first waveguide at a variable distance d. Our calculation is applied to the analysis of several doped silica waveguides of practical importance for optical circuit design.     

用正四棱锥形阵对声目标定位研究

文章结合声阵列在智能雷系统中的应用，提出了用立体五元声阵列对声目标进行定位，将智能雷中用于预警的传感器也参与到定位阵列中来，这样就在不增加传感器的条件下实现了市体阵列对声目标的定位。文章推导了定位公式和误差公式，并对结果进行仿真分析，与平面阵相比取得了较好的效果。不但提高了精度还降低了声阵列的盲区。     

Three‐dimensional wave impact on a rigid structure using smoothed particle hydrodynamics

Navier–Stokes computations of a wave–structure interaction are performed with the aim of assessing the potential of smoothed particle hydrodynamics to accurately estimate impact loading time history. A three‐dimensional dam‐break flow with a rectangular column located downstream is considered. The net force and impulse exerted on the column is monitored throughout the simulation with the results correlating well with existing experimental data. Initial and boundary conditions and numerical parameters are varied and their effect on the column load investigated. The column load is found to be most sensitive to the choice of boundary treatment. Copyright © 2011 John Wiley & Sons, Ltd.     

On the free vibration response of rectangular plates,partially supported on elastic foundation

Rectangular plates on distributed elastic foundations are widely employed in footings and raft foundations of variety of structures. In particular, mounted columns and single footings may partially occupy the rectangular plate of any kind.     

金属光栅表面增强喇曼散射TE模的计算分析

以纳米量级金属履带矩形光栅为模型,研究了表面增强喇曼散射的特性.针对TE模的入射光,采用耦合波原理对金属表面的衍射场进行了讨论,并用数值计算方法讨论了光栅周期、光栅深度等参量对表面增强的影响以及增强因子随第一级瑞利系数的变化关系.结果表明：在入射光波长为700 nm、光栅周期p=400 nm、 光栅深度d=150 nm、占空比为1/3、入射角度为10°时,获得最大增强,增强因子G可达102.     

梯级溃坝洪水洪峰增强机制

我国在多条河流上修建了大量梯级水库, 梯级坝溃决诱发洪水大大超过单坝溃决洪水洪峰, 因此亟需加深对梯级坝溃决洪水洪峰增强机制的认识. 本文建立了梯级坝溃决洪水演进过程的一维浅水动力学模型, 发展了一套能捕捉激波、干湿边界和保平衡结构的数值求解方法, 通过大量算例, 系统研究了梯级坝溃决洪水演进过程的质量转化和能量转化机制. 研究结果表明, 梯级溃决中, 上游溃决诱发的洪水大大增大下游水库的质量和动量, 形成一个带动量的水塔, 同时在尾部残留一个动量较大的射流, 不断补充下游坝体溃决后水塔的质量和动量, 持续维持洪峰高度. 根据该射流-水塔机制, 建立了梯级坝溃决洪水演进过程对应的射流-水塔单坝溃决洪水过程等效模型, 该等效模型基本反映了梯级坝溃决诱发洪水的洪峰过程, 并成功预测了多个坝间距为百公里量级的梯级坝溃决洪水洪峰高程和流量, 可望为流域防洪和梯级坝设计提供理论依据.      

Aeroelastic analysis of cantilever plates using Peters’ aerodynamic model,and the influence of choosing beam or plate theories as the structural model

In this paper, the aeroelastic analyses of a rectangular cantilever plate of varying aspect ratio is presented. The classical plate theory has been selected as the structural model. The main point that distinguishes this study from previously reported research is employing Peters’ theory to model aerodynamic effect which is not straightforward. The Peters’ aerodynamic model was originally developed to provide lift and moment, which is only applicable to the structural model based on the beam theories. In this study, using the basic concept of the Peters’ aerodynamic model in addition to utilizing the Fourier series, the pressure distribution is derived, which makes Peters’ model applicable to structural models based on plate theory. This combination provides a much simpler state–space aeroelastic model for plates in comparison to the prevalent panel methods, which could lead to a significant reduction in computational time. In addition, the aeroelastic response of the plate with respect to changes in the structural model from the beam theory to the plate theory is evaluated. By using data from an experiment carried out at Duke University, the theoretical results are evaluated. Furthermore, the differences in structural models obtained from the plate and beam theories can be divided into two distinct parts, which are responsible for differences in bending and torsional behaviors of the structure, separately. This approach enables us to measure the effects of differences of each behavior separately, which could provide with a new insight into the problem. It has been determined that the flutter speeds obtained from the beam and plate aeroelastic models are little affected by the difference in bending behavior, but rather is mainly caused by the difference in torsional frequencies.     

水下爆炸冲击荷载下混凝土重力坝的抗爆性能

在水下爆炸冲击荷载作用下,结构动力响应较之静态荷载和地震荷载作用下要复杂得多。通过大 量的数值模拟,探讨了混凝土重力坝在水下爆炸冲击荷载作用下,大坝高度、库前水位对大坝抗爆性能的影 响,为大坝抗爆性能评估和防护设计提供基础。数值计算中,构建了重力坝水下爆炸全耦合数值模型,并考虑 爆炸冲击作用下混凝土的高应变率效应。研究结果表明:对于混凝土重力坝,随着大坝高度的增加,大坝的抗 爆性能增强;库前水位对大坝的抗爆性能影响较大,通过降低库前水位可有效提高大坝的抗爆性能。     

水力劈裂问题的态型近场动力学建模

将态型近场动力学理论引入水力劈裂问题的模拟。构建了能反映岩土类材料准脆性断裂特征的态型近场动力学本构模型,并在物质点间相互作用力模型中加入等效水压力项,以实现在新生裂纹面上跟踪施加水压力。同时,考虑裂纹面间的接触,引入物质点间的短程排斥力作用,并设计了相应的接触算法。通过自编程序将模型和算法应用于含初始裂纹、不含初始裂纹以及含坝基软弱结构面的混凝土重力坝在高水头作用下的水力劈裂过程模拟,并与扩展有限元等模拟结果对比,验证了本文模型和算法的可行性和准确性。     

求解带自由面渗流问题移动网格法的改进及其工程应用

采用有限元固定网格和移动网格相结合的方法,求解带自由面的坝体稳定渗流问题。本方法是针对一般坝体的结构,在有限元网格生成之后,又自动生成了网格移动所需的信息,实现了网格在迭代计算中随自由面的变化自动均匀移动;讨论了网格奇异的不同类型,提出了避免单元形状怪异的移动网格方法;在欧拉空间中分区记录坝体不同的渗透性能,在网格移动到新位置后,自动识别网格所在的物性空间,从而确定单元在新位置上的渗流系数。本文将该方法应用到吉林丰满混凝土重力坝防渗加固的实际工程当中,在考虑大坝原有防渗措施的前提下,利用数值分析,研究了防渗芯墙对大坝渗流性能的影响。计算结果表明,加芯墙后坝体自由面位置明显下移,湿水部分大为减少,坝基扬压力没有明显提升,下游出水点位置没有明显下降。计算过程表明,本文方法及措施具有很好的收敛性与稳定性,且收敛性与自由面初始位置的选择无关。