混凝土动态劈裂拉伸试验的数值模拟

采用LS-DYNA有限元编码程序，对混凝土的动态劈裂拉伸试验进行了数值模拟，给出了混凝土试样在不同类型加载情况下应力分布之间的差异，证实了动态劈裂拉伸试验的有效性，提出了改进试验方法的若干结论．     

Statistical Analysis of the Effect of Mineral Admixtures on the Strength of the Interfacial Transition Zone

Microscopic evidence indicates that the thickness of the interfacial transition zone (ITZ) between the aggregate and the cement paste is modified when mineral admixtures partially replace portland cement. Unfortunately, there is limited information on the significance of these microscopic modifications to the mechanical properties of the ITZ. This research reports experimental results on the shear and tensile strength of the ITZ as affected by the addition of the following mineral admixtures: silica fume, fly ash, and natural pozzolan. Statistical analysis was used to identify the significant parameters affecting the tensile and shear strength of the ITZ. Experimental results indicate that not only does the incorporation of silica fume and fly ash increase the strength of the ITZ, these mineral admixtures have a greater influence on the strength increase of the ITZ than in the strength increase of the cement paste.     

高强混凝土弯压极限应变试验研究与计算

由于混凝土材料理化特性的差异,高强混凝土的弯压极限应变明显地小于普通混凝土,依据试验结果分析了高强混凝土的弯压极限应变变化规律,并给出了它的计算公式.     

ICP-AES法测定混凝土外加剂中微量氯离子

由于Cl^-过量引起混凝土钢筋锈蚀而过早的破坏，已成为世界性问题。混凝土外加剂中微量Cl^-是一个重要指标，准确测定氯离子的含量直接关系到混凝土配比的确定及浇灌后的质量。部颁及行业标准中是采用电化学滴定法和蒸馏法来测定混凝土外加剂的微量Cl^-[1,2]，电化学滴定法对测定干扰大。本文采用电感耦合等离子体原子发射光谱法间接测定与微量Cl^-定量反应后剩余的Ag^ 含量，从而换算出Cl^-的含量，经回收验证及比较，证明本法简便、灵敏、快速，切实可行。     

Calorimetric studies of refractory corundum

Calorimetry has been used in the investigations of calcium aluminate materials produced as a binder for aluminate-corundum composites of high refractoriness. The kinetics and of hydration process was thus characterized and the optimum compositions of initial binders and cement-corundum refractory filler blends could be selected for further tests. The acceleration of heat evolution - the shortening of so-called induction period and relatively high heat output in the presence of corundum was observed. It means the acceleration of hydration process, that is early crystallisation of hydration products and subsequent further dissolution of initial anhydrous aluminate phases. In the presence of fine grained corundum particles these phenomena should be attributed to the nucleating effect of fine corundum particles. This revised version was published online in July 2006 with corrections to the Cover Date.     

Sol-Gel processing of silica nanoparticles and their applications

Recently, silica nanoparticles (SNPs) have drawn widespread attention due to their applications in many emerging areas because of their tailorable morphology. During the last decade, remarkable efforts have been made on the investigations for novel processing methodologies to prepare SNPs, resulting in better control of the size, shape, porosity and significant improvements in the physio-chemical properties. A number of techniques available for preparing SNPs namely, flame spray pyrolysis, chemical vapour deposition, micro-emulsion, ball milling, sol-gel etc. have resulted, a number of publications. Among these, preparation by sol-gel has been the focus of research as the synthesis is straightforward, scalable and controllable. Therefore, this review focuses on the recent progress in the field of synthesis of SNPs exhibiting ordered mesoporous structure, their distribution pattern, morphological attributes and applications. The mesoporous silica nanoparticles (MSNPs) with good dispersion, varying morphology, narrow size distribution and homogeneous porous structure have been successfully prepared using organic and inorganic templates. The soft template assisted synthesis using surfactants for obtaining desirable shapes, pores, morphology and mechanisms proposed has been reviewed. Apart from single template, double and mixed surfactants, electrolytes, polymers etc. as templates have also been intensively discussed. The influence of reaction conditions such as temperature, pH, concentration of reagents, drying techniques, solvents, precursor, aging time etc. have also been deliberated. These MSNPs are suitable for a variety of applications viz., in the drug delivery systems, high performance liquid chromatography (HPLC), biosensors, cosmetics as well as construction materials. The applications of these SNPs have also been briefly summarized.     

Mechanically strong and stiff supramolecular polymers enabled by fiber reinforced long-chain alkane matrix

Fiber-reinforced-concrete (FRC) mechanism refers short discrete fibers that are uniformly distributed and randomly oriented, which offers an effective way to improve the mechanical performance of concrete. In the design of supramolecular polymers, an analogous concept of FRC appears to have been considered very rarely-although fibrous structure has been frequently observed/generated during the supramolecular polymerization. In this work, we apply the alkane thermosets, octadecane (C₁₈H₃₈) and tetracosane (C₂₄H₅₀), taking the role of “concrete”, and the low-molecular-weight monomer with long alkyl chains as the essential “fiber” component, to fabricate the “fiber reinforced supramolecular polymer”. Very much like FRC mechanism in material science, the resulting fiber reinforced supramolecular polymer thus exhibit unusually high mechanical strength and stiffness, which is unprecedented in the conventional supramolecular strategy.     

Diseño automático de tableros óptimos de puentes de carretera de vigas artesa prefabricadas mediante algoritmos meméticos híbridos

This paper deals with the minimum cost automatic design of precast bridge decks made of U-beams and an upper slab. It uses a hybrid memetic algorithm that combines the population search of solutions by genetic algorithms and a search by variable neighborhood. This algorithm is applied to a bridge made of two isostatic U-beams of 20-40 m of span and a width of 12 m. This example has 40 discrete variables. The evaluation module takes into account the service and ultimate limit states usually considered for these structures, i.e. flexure, shear, torsion, cracking, deflections, etc. The use of the memetic algorithm requires its previous calibration. Each of the heuristics is run 12 times, obtaining information about the minimum and average values, as well as the scatter. The parametric study showed a good correlation for the cost, the number of strands and the steel and concrete quantities with the span length. Savings have been found between 8 and 50% compared to other structures really executed. The presented procedure allows the practical application to the real design and its adaptation to the precast process.     

3D X-ray Micro-CT Analysis of Rebar Corrosion in Reinforced Concrete Subjected to a Chloride-Induced Environment

The paper presents experimental investigations of the concrete covers’ protective ability to counteract rebar corrosion in reinforced concrete cubes. The concrete sample was subjected to a chloride-induced environment to get corroded and combined with an un-corroded sample. The chloride-accelerated technique can induce a high degree of corrosion within a controlled time. Moreover, detailed and thorough experimental measurements and analyses of reinforcement loss due to corrosion and its influence on concrete microstructure, were studied through 3D X-ray micro-computed tomography. The rebar outside the concrete was heavily corroded due to the chloride-accelerated test, whereas, only local surface corrosion products appeared inside the concrete. It turned out that the concrete cover showed protective ability to counteract the reinforcing-steel corrosion mechanism despite the accelerated corrosion environment. Moreover, the bond strength between the reinforcement rebar and concrete was not visibly affected since the failure force in the pull-out test and failure mechanisms, observed by 3D X-ray micro-CT, were similar for corroded and un-corroded samples. The failure occurred due to radial cracks with a maximum width equal to approximately 0.25 mm.