CONCEPTUAL DESIGN STUDIES OF AN 84 GHz, 500 kW, CW GYROTRON

The feasibility of an 84 GHz, 500 kW, CW gyrotron for ECRH on an experimental tokamak will be presented in this paper. Mode competition and mode selection procedures are carefully investigated by considering various candidate modes and the TE_10,4 mode is chosen as the operating mode. A conventional cylindrical cavity resonator with weak input and output tapers and parabolic roundings is considered for interaction studies. Self-consistent, both single mode and time-dependent, calculations are carried out and power and efficiencies are computed for a typical set of beam parameters. The results show that an output power of well over 500 kW, CW and efficiency around 40% can be reached without a depressed collector.     

On a class of new and practical performance indexes for approximation of fold bifurcations of nonlinear power flow equations

Efficient measurement of the performance index (the distance of a loading parameter from the voltage collapse point) is one of the key problems in power system operations and planning and such an index indicates the severity of a power system with regard to voltage collapse. There exist many interesting methods and ideas to compute this index. However, some successful methods are not yet mathematically justified while other mathematically sound methods are often proposed directly based on the bifurcation theory and they require the initial stationary state to be too close to the unknown turning point to make the underlying methods practical.This paper first gives a survey of several popular methods for estimating the fold bifurcation point including the continuation methods, bifurcation methods and the test function methods (Seydel's direct solution methods, the tangent vector methods and the reduced Jacobian method) and discuss their relative advantages and problems. Test functions are usually based on scaling of the determinant of the Jacobian matrix and it is generally not clear how to determine the behaviour of such functions. As the underlying nonlinear equations are of a particular type, this allows us to do a new analysis of the determinants of the Jacobian and its submatrices in this paper. Following the analysis, we demonstrate how to construct a class of test functions with a predictable analytical behaviour so that a suitable index can be produced. Finally, examples of two test functions from this class are proposed. For several standard IEEE test systems, promising numerical results have been achieved.     

非傍轴平顶高斯光束M2因子两种定义的比较研究

基于功率密度的二阶矩方法,推导出了非傍轴平顶高斯(FG)光束束宽和远场发散角的解析表达式·研究表明,当w0/λ→0时,远场发散角趋于渐近值θmax=63.435°,与阶数无关·使用非傍轴高斯光束代替傍轴高斯光束作为理想光束,研究了非傍轴FG光束的M2因子,并与传统定义的M2因子作了比较·在非傍轴范畴,非傍轴FG光束的M2因子不仅与阶数N有关,而且与w0/λ有关·按照定义,当w0/λ→0时,非傍轴FG光束的M2因子不等于0,对阶数N=1,2,3时,M2因子分别趋于0.913,0.882和0.886·当N→∞时,M2因子取最小值M2min=0.816·     

非傍轴平顶高斯光束M2因子两种定义的比较研究

基于功率密度的二阶矩方法，推导出了非傍轴平顶高斯(FG)光束束宽和远场发散角的解析表达式.研究表明，当w0/λ→0时，远场发散角趋于渐近值θmax=63.435°，与阶数无关.使用非傍轴高斯光束代替傍轴高斯光束作为理想光束，研究了非傍轴FG光束的M2因子，并与传统定义的M2因子作了比较.在非傍轴范畴，非傍轴FG光束的M2因子不仅与阶数N有关，而且与w0/λ有关.按照定义，当w0/λ→0时，非傍轴FG光束的M2因子不等于0，对阶数N=1, 2, 3时，M2因子分别趋于0.913,0.882和0.886.当N→∞时，M2因子取最小值M2min=0.816.     

Active long pulse shaping technique of pulsed CO2 laser using multi-pulse discharge control

We describe the pulse forming of pulsed CO₂ laser using multi-pulse superposition technique. Various pulse shapes, high duty cycle pulse forming network (PFN) are constructed by time sequence. This study shows a technology that makes it possible to make various long pulse shapes by activating SCRs of three PFN modules consecutively at a desirable delay time with the aid of a PIC one-chip microprocessor. The power supply for this experiment consists of three PFN modules. Each PFN module uses a capacitor, a pulse forming inductor, a SCR, a high voltage pulse transformer, and a bridge rectifier on each transformer secondary. The PFN modules operate at low voltage by driving the primary of HV pulse transformer. The secondary of the transformer has a full-wave rectifier, which passes the pulse energy to the load in a continuous sequence.We investigated various long pulse shapes as different trigger time intervals of SCRs among three PFN modules. As a result, we could obtain laser beam with various pulse shapes and durations from about 250 to 1000 μs.     

BELENE nuclear power plant numerical and experimental bedrock,layers and surface signals

An investigation of BELENE Nuclear Power Plant (NPP) free field signal is presented in the current study. An SH wave propagation trough multilayer geological media in the region is considered. An original structural model of the geological column has been developed. The investigated layers are isotropic, with constant depth and skyline parallel. The SH rays are with an arbitrary angle as far as the layers are concerned. The seismic SH waves have been generated by a special detonation device. The main results of the study are graphically illustrated. A comparison between the original BELENE NPP experimental and the numerical surface (free field) signals (obtained by the formulated direct problem) for the investigated geological column has been carried out and its results are hereby shown.     

PV型HgCdTe光电探测器中的混沌及其诊断

 对激光辐照半导体光电探测器的实验研究，发现当一束不太强的稳定连续波激光照射在PV型HgCdTe光电探测器上时，可以引起探测器出现混沌行为。利用光电探测器的光电压信号随时间变化的实验数据，通过求功率谱、计算Lyapunov指数对混沌进行了诊断。     

Millimeter wave beams diffracted from reflecting gratings

According to the angular-spectrum method, a radiation beam of an antenna horn in the Fresnal region is decomposed into the plane waves with the fast Fourier transform algorithm and the waves diffracted from a reflection grating are superposed as a diffracted beam. Compared with the reflected beam from the same size mirror, the radiation half width of the diffracted beam from a grating is narrower and its lateral shape is shift. These performances have been experimentally verified at Ka-band by: (1). The relative diffraction efficiencies in the first order with two triangular gratings which is put along propagating direction of a beam produced by a conical lens-horn. (2). H-plane lateral width with power—3dB lapsed of the focus beam from a grating and a mirror in a grating spectrometer for millimeter waves (25–100 GHz).     

Generalization of a sharp Hölder's inequality and its application

In this paper, we generalize Hu Ke's sharpness of Hölder's inequality. As application, the obtained result is used to improve the well-known Opial-Olech inequality.     

Low sintering temperature MnZn-ferrites for power applications in the frequency region of 400 kHz

In this paper, the effect of cubic zinc metaborate Zn₄O(BO₂)₆ on the sintering of MnZn-ferrites for medium frequency power applications is investigated. Zinc metaborate is synthesized in the laboratory using zinc oxide and boric acid as metal precursors. As observed, when zinc metaborate is added to the MnZn-ferrites at an optimum amount of 0.02 wt%, it significantly enhances densification and therefore allows, for a given density, reduction of the firing temperature by almost 200 °C. MnZn-ferrites exhibiting power losses of 70 mW/cm³ (measured at a frequency of 400 kHz, magnetic field 50 mT and temperature of 90 °C) are synthesized from conventionally milled powders with average particle diameter 0.6 μm, compacted and fired at 1100 °C. Identical experiments conducted under the same conditions on specimens without zinc metaborate additions revealed power losses greater than 300 mW/cm³, because of insufficient densification.