Vacuum‐driven fluid manipulation by a piezoelectric diaphragm micropump for microfluidic droplet generation with a rapid system response time

Recently, we developed a convenient microfluidic droplet generation device based on vacuum‐driven fluid manipulation with a piezoelectric diaphragm micropump. In the present study built on our previous work, we investigate the influence of settings applied to the piezoelectric pump, such as peak‐to‐peak drive voltage (V_p‐p) and wave frequency, on droplet generation characteristics. Stepwise adjustments to the drive voltage in ±10‐V_p‐p increments over the range of 200?250 V_p‐p during droplet creation revealed that the droplet generation rate could be reproducibly controlled at a specific drive voltage. The droplet generation rate switched within <0.5 s after the input of a new voltage. Although the droplet generation rate depended on the drive voltage, this setting had almost no influence on droplet size. The frequency over the selected range (50?60 Hz) did not markedly influence the droplet generation rate or droplet size. We show that the current fluid manipulation system can be conveniently used for both droplet generation and for rapid droplet reading, which is required in many microfluidic‐based applications.     

ICP-AES测定钛基复合材料中镍、钕和铁的研究

采用ICP－AES法对钛基复合材料中的合金元素镍、钕、铁的测定进行了研究，着重进行了基体元素及待测元素镍、钕、铁之间干扰试验及各元素在测定浓度范围内的线性相关性试验，进行了酸度试验，测定了钛基复合材料中3种元素的含量，得到了较好的精密度和准确度。方法简便、可靠，获得满意的分析结果。     

Structural optimization design for large mirror

The system design must be started from the concept with low cost and high performance. In this point, the topological shape of the structure is very important in the view of the structural rigidities and light-weight design.In this paper, the optimization methodology is presented in the design stage of the large optical mirror. We obtain the optimal layout through the topology optimization and then design the details through the size or shape optimization for structural rigidity.     

The analysis of thermal stresses in thermopiezoelastic semi-infinite body with an edge crack

Summary  Thermopiezoelastic materials have recently attracted considerable attention because of their potential use in intelligent or smart structural systems. The governing equations of a thermopiezoelastic medium are more complex due to the intrinsic coupling effects that take place among mechanical, electrical and thermal fields. In this analysis, we deal with the problem of a crack in a semi-infinite, transversely isotropic, thermopiezoelastic material by means of potential functions and Fourier transforms under steady heat-flux loading conditions. The problem is reduced to a singular integral equation that is solved. The thermal stress intensity factor for a crack situated in a cadmium selenide material is calculated. Received 20 March 2001; accepted for publication 18 October 2001     

Multi-cracks problem for piezoelectric materials strip subjected to dynamic loading

This paper analyses and models the dynamic interaction among permeable multi-cracks in a piezoelectric strip under anti-plane shear waves by the Schmidt method. The Fourier transform is applied and then two pairs of triple integral equations can be solved using the Schmidt method. The results show that the stress and the electric displacement intensity factors of cracks depend on not only the crack length and the piezoelectric coefficient, but also the thickness of the piezoelectric strip, the distance between multi-cracks and the frequency of incident wave.     

Development of a Millimeter Wave Compact Equipment for NDT of Materials

We developed a compact equipment working at 94 GHz to replace the commonly used network analyzer for nondestructive testing of materials. The compact equipment was designed to measure the variations in the amplitude and phase of the reflected signal from the material relative to a reference signal. A good accuracy of the amplitude and phase measurement of the equipment was obtained in the confirmative experiments. The distribution of a drop of water in a wood plate is clearly visible in the millimeter wave images obtained by the amplitude and phase measurement.     

Indentation responses of piezoelectric films

Frictionless indentation responses of transversely isotropic piezoelectric film/rigid substrate systems under circular cylindrical indenter (i.e., punch), conical indenter (i.e., cone), and spherical indenter (i.e., sphere) are investigated. Both insulating and conducting indenters are considered. The technique of Hankel transformation is employed to derive the corresponding dual integral equations for the mixed boundary value indentation problems. For the two limiting cases of infinitely thick and infinitely thin piezoelectric films, closed-form solutions are obtained. For piezoelectric films of finite thickness, a numerical method is constructed to solve the dual integral equations and semi-empirical models having only two unknown parameters are proposed for the responses of indentation force, electric charge and electric potential, and contact radius. With the two parameters inferred from the numerical results, the semi-empirical formulae are found to provide good estimates of the indentation responses for the two limiting cases of infinitely thick and thin piezoelectric films, as well as those in between. The inferred parameters in the proposed semi-empirical formulae for normalized indentation force and electric charge are checked against four different piezoelectric materials and are found to be insensitive to the selection of piezoelectric materials. It is believed that the proposed semi-empirical indentation formulae are useful in developing experimental indentation techniques to extract the material properties of piezoelectric films.     

An Oscillation Condition for an Electrode－separated Piezoelectric Sensor in Non－electrolyte Liquid

ＡｎＯｓｃｉｌｌａｔｉｏｎＣｏｎｄｉｔｉｏｎｆｏｒａｎＥｌｅｃｔｒｏｄｅ－ｓｅｐａｒａｔｅｄＰｉｅｚｏｅｌｅｃｔｒｉｃＳｅｎｓｏｒｉｎＮｏｎ－ｅｌｅｃｔｒｏｌｙｔｅＬｉｑｕｉｄＳＨＥＮＤａ－ｚｈｏｎｇ，ＨＵＡＮＧＭｉｎｇ－ｓｈａｎ，ＬＩＮＳｏｎｇ，Ｎ...     

Oscillation condition for a series piezoelectric sensor. Application to the determination of urease activity in plant seeds

The oscillating conditions for a series piezoelectric quartz crystal (SPQC) are proposed and verified experimentally. The influence of the cell constant and oscillator phase on the oscillational ability of the SPQC was investigated. It is shown that the SPQC possesses excellent oscillational ability in low or high conductivity solutions, but in solution of intermediate conductivity, the oscillational ability decreases with increasing oscillator phase or decreasing cell constant, sometimes resulting in a cease-to-oscillate zone. The SPQC was applied to determine the urease activity in plant seeds with a detection limit of 0.004 U ml⁻¹, based on the change in conductivity.