Chromatographic characterization of high‐boiling petroleum fractions

Detailed investigation of solvent‐separated fractions of petroleum vacuum residues is necessary for understanding the separation mechanism using different solvents and to prepare better feedstocks for secondary conversion processes. The efficiency of different solvents to remove polars and insolubles from vacuum residues (of two Indian crude oils) has been studied. The solvents used were n‐heptane, n‐hexane, and n‐pentane (non‐polar) and ethyl acetate (polar). Soluble fractions were characterized for hydrocarbon group type analysis using high performance liquid chromatography (HPLC), average molecular weights using size exclusion chromatography (SEC), and boiling point distribution using high temperature gas chromatography (HTGC). Method development for HPLC analysis involved the study of parameters such as columns, solvent polarity, detectors, model compounds study, calibration, flow, and solvent gradient programming. The study demonstrated that ultimate soluble fractions have the least content of polar structures of the kind which can cause problems, during cracking and are least prone to cracking. The HPLC, SEC, and simulated distillation (SIMDIS) methods developed and standardized are simple, accurate, and suitable for the rapid assay needed for quick compositional surveys.     

Internal standardization for the determination of cadmium,cobalt, chromium and manganese in saline produced water from petroleum industry by inductively coupled plasma optical emission spectrometry after cloud point extraction

In the present paper a procedure is proposed for the determination of traces of Cd, Co, Mn and Cr in petroleum industry produced water by inductively coupled plasma optical emission spectrometry. The procedure is based on cloud point extraction of these metals, as their dithizonate complexes, into the surfactant-rich phase of octylphenoxypolyethoxyethanol surfactant (Triton X-114). Extractions were carried out in solutions with salinities between 10‰ and 70‰. Since residual salinity in the surfactant-rich phase caused differences in its transport to the plasma, yttrium was used as an internal standard to correct for this effect. The simultaneous metal extraction procedure was optimized by response surface methodology using a Doehlert design and desirability function. Enhancement factors of 21, 21, 9 and 19, along with limits of quantification of 0.093, 0.20, 0.73 and 1.2 μg L^− 1, and precision expressed as relative standard deviation (n = 8, 20.0 μg L^− 1) of 5.8, 1.2, 1.7 and 5.7% were obtained for Cd, Co, Mn and Cr, respectively. The accuracy was evaluated by spike recovery tests on the high salinity water samples with salinity of 40 and 63‰.     

Supercritical fluid chromatography of petroleum products using flameless sulfur chemiluminescence detection

Supercritical fluid chromatography using flameless sulfur chemiluminescence detection has been investigated for the analysis of sulfur compounds in petroleum products. The chromatography and detection system was easy to implement and exhibited good precision, linearity, selectivity, and sensitivity. A minimum detectable limit of 0.3 pg sulfur/s was obtained, and response to sulfur in different sulfur species was nearly equimolar.     

Determination of hopane biomarkers in Arabian crude oils by gas chromatography-tandem mass spectrometry

Gas chromatography-mass spectrometry with the mass spectrometer operated in the tandem mode at a constant accelerating voltage was used to analyse for triterpanes in Arabian crude oils. Specific molecular parent-daughter ion pairs were selected for quantitative measurements owing to their metastable transitions in the first field-free region. More accurate relative distribution ratios of hydrocarbon biomarkers were determined by this sequential gating technique than by the conventional diagnostic daughter ion mass fragmentogram in common GC-MS. The data and spectra obtained from MS-MS operation may serve as unique “fingerprints” for these regional crudes     

Comparison of purge and trap GC/MS and spectrophotometry for monitoring petroleum hydrocarbon degradation in oilfield produced waters

Results of using a field spectrophotometer and its appropriate protocols as a surrogate method for an oilfield produced water treatment process is presented. Methylene chloride extractions of the produced water before and after treatment maintained a yellow color pigment that was directly proportional to the hydrocarbon concentration. From this, an absorption spectrum and standard curve were developed. A resultant linear plot of the standard curve indicated that there is an excellent correlation (r²=0.9847) between the varying concentrations and the associated absorbance values at a wavelength of 400 nm. Total n-alkane concentration comparisons between the laboratory GC/MS analysis and the spectrophotometry analysis generated data of similar accuracy and precision at concentrations ranging from 1 to 137 mg/l (alpha=0.05). Linear comparisons between GC/MS and spectrophotometric coefficients were near unity, with the constant being near zero, with a correlation coefficient (r²) of 0.99. Based on this study, spectrophotometry is a complimentary method to GC/MS for determining total n-alkane concentrations in oilfield produced water samples.     

Determination of arsenic in petroleum refinery streams by electrothermal atomic absorption spectrometry after multivariate optimization based on Doehlert design

This paper reports the development of a methodology for the determination of arsenic in petroleum refinery aqueous streams containing large amounts of unknown volatile organic compounds, employing electrothermal atomic absorption spectrometry with polarized Zeeman-effect background correction. In order to make the procedure applicable, the influence of chemical modification and the drying step was examined. Also, pyrolysis and atomization temperatures and the amount of nitric acid added to the sample were optimized using a multivariate approach based on Doehlert matrix. Obtained results indicate that, in this kind of sample, arsenic must be determined by standard addition procedure with a careful control of the drying step temperature and ramp pattern. In order to evaluate the accuracy of the procedure, a test was performed in six spiked samples of petroleum refinery aqueous streams and the relative errors verified in the analysis of such samples (added As between 12.5 and 190 μg l⁻¹) ranged from −7.2 to +16.7%. The detection limit and the relative standard deviation were also calculated and the values are 68 pg and 7.5% (at 12.5 μg l⁻¹ level), respectively.     

Analysis of Petroleum Distillates from Fire Debris Using Supercritical Fluid Extraction with a Two‐Level Orthogonal Array Experimental Design

A supercritical fluid extraction (SFE) method was developed in the present study as an effective sample pretreatment technique of petroleum distillates from fire debris. Three petroleum distillates were used as target analytes, including 95 unleaded gasoline, kerosene, and premium diesel. An orthogonal array (L16) experimental design was adopted to separately evaluate primary SFE experimental factors. The SFE efficiencies of petroleum distillates at various extraction conditions were examined and the optimized SFE conditions were identified. Experimental results demonstrated that the optimized SFE method not only provided an effective extraction method for the spiked sample, but also successfully recovered residues of petroleum distillates from fire debris.     

GC–MS analysis of phenolic compounds in fuels after conversion to trifluoroacetate esters

The GC–MS characteristics of trifluoroacetate esters of phenolic compounds are discussed. Linear temperature programmed retention indices and total ion current MS response factors of over 120 phenolic esters are reported. The main GC advantages from analysis of trifluoroacetate esters as compared to plain phenols are enhanced volatility and improved resolution. For example, the elution temperature of a given phenol is typically 50 °C greater than that of the corresponding trifluoroacetate ester. Also, while retention of compounds with two trifluoroacetate groups is only moderately greater than mono esters, underivatized dihydroxy compounds are very difficult to elute from any GC column. Complete resolution of isomeric C₀-, C₁- and C₂-alkylphenol esters is readily achieved on conventional fused silica GC columns; resolution of the corresponding underivatized compounds requires specialized GC columns with low temperature limits. In general, mass spectra of trifluoroacetate esters are more characteristic of a given structure than those of the corresponding phenols and may be more rigorously interpreted towards structural elucidation. A table in the report summarizes some of the more important spectral features used in compound identification. Example applications in analysis of coal-, shale- and petroleum-derived materials are presented. Selected ion monitoring is used to determine individual phenolic components in whole distillates; reconstructed ion chromatograms are used to illustrate distributions of selected species as a function of fuel storage and thermal stress.     

Electrochemical technologies for treating petroleum industry wastewater

This review focuses on recent developments in electrochemical technology (with special emphasis on electrocoagulation, electro-oxidation, and electro-Fenton) to treat petroleum industry effluents (offshore and hydraulic fracturing extraction, as well as refinery effluents). In addition, an overview is given of what these processes face to position themselves as consolidated technologies.     

PHYSICAL STRUCTURE AND PHASE PROPERTIES OF AQUEOUS SYSTEMS OF LIPIDS FROM RYE AND TRITICALE IN RELATION TO WHEAT LIPIDS

In connection with studies of technical functionality of lipids in cereals, the aqueous systems of lipids from rye and tri-ticale flour are described and compared to different wheat culti-vars. Rye lipids give a lamellar liquid-crystalline phase with very small ordered regions, and this phase is continuously changed into an L2-phase with increasing water content. Triticale lipids exhibit phase equilibria in between lipids of wheat and of rye. Evidence is given for a significant role of the lamellar liquid--crystalline phase with regard to technical functionality when the cereal flour is worked in water to give a dough.