Investigation of hypersonic nozzle flow uniformity using NO fluorescence

Planar laser-induced fluorescence visualisation is used to investigate nonuniformities in the flow of a hypersonic conical nozzle. Possible causes for the nonuniformity are outlined and investigated, and the problem is shown to be due to a small step at the nozzle throat. Entrainment of cold boundary layer gas is postulated as the cause of the signal nonuniformity. PACS 47.80.Jk, 47.40.Ki, 47.60.+i     

Tail probabilities of the limiting null distributions of the Anderson–Stephens statistics

For the purpose of testing the spherical uniformity based on i.i.d. directional data (unit vectors) z_i, i=1,…,n, Anderson and Stephens (Biometrika 59 (1972) 613–621) proposed testing procedures based on the statistics S_max=max_u S(u) and S_min=min_u S(u), where u is a unit vector and nS(u) is the sum of squares of u′z_i's. In this paper, we also consider another test statistic S_range=S_max−S_min. We provide formulas for the P-values of S_max, S_min, S_range by approximating tail probabilities of the limiting null distributions by means of the tube method, an integral-geometric approach for evaluating tail probability of the maximum of a Gaussian random field. Monte Carlo simulations for examining the accuracy of the approximation and for the power comparison of the statistics are given.     

工业CT图像均匀性校正

在工业CT图像重建过程中,射束硬化使得图像出现“杯状”伪影,阵列探测器响应不一致使得图像出现环状伪影、带状伪影和点伪影,影响图像均匀性.本文分析了射束硬化的原理和探测器响应不一致的数学模型,并通过实验,对探测器响应进行多挡板定标得到校正系数表.利用查表插值的方法对投影数据进行均匀性校正,消除上述伪影.     

Numerical study on combustion of H2—O2 in a supersonic reactive expansion in a nozzle

A study on expansion flow inside a nozzle considering full mechanism chemistry of hydrogen and oxygen was carried out. In this study, a full implicit scheme for turbulent reactive flow was obtained by combining the second order TVD scheme of Yee and Harten (1987, Implicit TVD schemes for hyperbolic conservation laws in curvilinear coordinates. American Institute of Aeronautics and Astronautics Journal, 25(2), 266–274) with the efficient implicit lower-upper scheme of Shuen and Yoon (1989, Numerical study of chemically reacting flows using a lower-upper symmetric successive overrelaxation scheme. American Institute of Aeronautics and Astronautics Journal, 27(12), 1752–1756). The species equations, Navier–Stokes equations and turbulence model were implemented in the numerical scheme and solved in conjunction with full detailed finite rate chemistry. The numerical scheme is verified by comparison with experimental results of a converging–diverging nozzle. Effects of inlet pressure, temperature and fuel-oxidant mass ratio on nozzle flow field were studied. Variation of chemical species under different conditions was investigated by considering a chemical mechanism. Results show that increasing inlet pressure increases the rate of reactions due to increasing the concentration of reactants. For lower inlet pressure the radical H increases slightly in the diverging part of the nozzle, while for higher pressures it decreases along the nozzle. Inlet fuel–oxidant mass ratio affects the variation of all species with a greater effect for a near stoichiometric ratio. It was also shown that a higher inlet temperature provides a more enhanced reaction zone in the diverging part of the nozzle.     

实现均匀照度光伏聚光镜设计

为满足聚光光伏系统的聚光需求,解决传统点聚焦式聚光光伏系统中聚焦光斑不均匀、径长比过大和聚光比较小的缺点,在不增加二次匀光器件的前提下,设计了径长比小、聚焦光斑相对均匀、聚光比高的聚光光伏系统。根据几何光学柯勒照明原理、等光程原理和反射定律,通过数值求解等光程方程组获得聚光镜各个面型的轮廓曲线。利用TracePro软件对所设计的聚光系统进行光线追迹模拟,结果表明:在聚光比为725的情况下,聚焦光斑最大照度仅为太阳照度的2300倍,是点聚焦情况下的1/10左右,系统的径长比为0.3,接收角为0.72°。系统设计实现了结构紧凑,聚光性能高的设计目标,为高倍聚光光伏系统的小型化,简单化提供了一种有效的解决途径。     

Proposition of a compensated pixelwise calibration for photonic infrared cameras and comparison to classic calibration procedures: Case of thermoelastic stress analysis

In this paper, we propose a compensated pixelwise calibration that integrates the effects of the camera housing temperature. The results of this calibration are compared on black body images to classic two points Non Uniformity Correction based calibrations, compensated or not. It is shown that the proposed approach leads to a significant improvement in the thermal resolution with a reduction in the mean error as well as the standard deviation. The approach is finally challenged on a real case measurement focusing on thermoelasticity. The gain in terms of accuracy measurement is highlighted by comparing the proposed calibration to classic calibrations and the scope of interest of this new calibration is discussed.     

超高强度钢（35CrNi3Mo）化学成分标准物质研制

采用与超高强度钢,台炼过程相同的工艺制备了35CrNi3Mo化学成分标准物质。对标准物质的制备技术、均匀性检验、稳定性考察进行了分析。研制的35CrNi3Mo化学成分标准物质具有良好的均匀性和稳定性。采用8家实验室进行协作定值,对定值结果的不确定度进行评定,各组分定值结果的相对扩展不确定度小于13％。     

Experimental research of effects of different rotation radii on the growth rate of potassium dihydrogen phosphate crystals

Comparing with the traditional concentric rotation method (rotation radius is 0 cm), the effects of different rotation radii on the growth rate of KDP crystals were studied by experimental methods. It was found that with the increase of rotation radius from 0 cm, the growth rate of each direction of crystals first increased and then decreased in a size‐unchanged vessel. The smaller the distance between the crystal and vessel wall, the less the growth rate. This phenomenon was named the “wall collision effect”. Also, the value of growth rate reached a maximum when the rotation radius was about half of its allowable largest value in the size‐unchanged vessel. In addition, an increase of the rotation radius could improve the crystal growth rate under the same linear velocity of crystal movement. Finally, the uniformity of crystal growth has also been analyzed compared with the concentric rotation radius. It was found that the uniformity of crystal growth was best when the rotation radius was half of its allowable maximum value, and it was more conducive to the actual application of KDP crystals.     

多层绝热材料规模化干燥处理时温度场的测试与分析

对大批量处理多层绝热材料的大型专用干燥箱满负荷运行时工作区域的温度场进行测试,通过温度分布和温度场均匀性的分析,得出了最高温度发生点的位置与成因以及影响温度场均匀性的主要因素,并对温度的控制方法、多层材料的布置方案和干燥设备的改进提出了建议。     

丝网印刷法制备高催化活性对电极

对电极在染料敏化太阳能电池（DSCs）中主要起催化氧化还原反应及收集电荷的作用,铂对电极常用的制备方法为磁控溅射法,但其成本较高,制备条件苛刻. 本文通过引入低成本的表面活性剂Span-85,所制得的铂对电极的附着力、透光率和均匀性显著改善,实现了面积可控,与两步浸泡法和旋涂热解法制备的对电极在DSCs中的光电转换效率分别为7.30%,6.96%和7.03%. 紫外-可见吸收光谱、扫描电镜和附着力测试等结果表明,（1）添加表面活性剂有利于增加附着力及改善透光率和均匀性;（2）使用该法制备的Pt/FTO对电极的透光率与两步浸泡法制作的相同,且铂粒子分布更加均匀. 电化学阻抗图谱、塔菲尔极化曲线和循环伏安曲线结果表明,丝网印刷方法制备的Pt/FTO对电极具有更加优异的催化性能,且该法更有利于降低其生产成本和大规模生产.