Laser nanosources based on planar photonic crystals as new platforms for nanophotonic devices

Two-dimensional photonic crystal lasers have been fabricated on III–V semiconductor slabs. Tuning of the spontaneous emission in micro and nanocavities has been achieved by accurate control of the slab thickness. Different structures, some of them of new application to photonic crystal lasers, have been fabricated like the Suzuki-phase or the coupled-cavity ring-like resonators. Laser emission has been obtained by pulsed optical pumping. Optical characterization of the lasing modes have been performed showing one or more laser peaks centred around 1.55 μm. Far field characterization of the emission pattern has been realized showing different patterns depending on the geometrical shape of the structures. These kinds of devices may be used as efficient nanolaser sources for optical communications or optical sensors.     

Molecular and nanoscale materials and devices in electronics

Over the past several years, there have been many significant advances toward the realization of electronic computers integrated on the molecular scale and a much greater understanding of the types of materials that will be useful in molecular devices and their properties. It was demonstrated that individual molecules could serve as incomprehensibly tiny switch and wire one million times smaller than those on conventional silicon microchip. This has resulted very recently in the assembly and demonstration of tiny computer logic circuits built from such molecular scale devices. The purpose of this review is to provide a general introduction to molecular and nanoscale materials and devices in electronics.     

Fullerenes as mass sensors: A numerical investigation

This paper investigates the novel development of a mass sensitive nanosensor based on the use of individual spherical fullerenes. The main advantage of the mass sensing ability of spherical fullerenes in comparison with other nanomaterials such as carbon nanotubes (CNTs) or graphene nanoribbons (GNRs) is the fact that they present almost perfect geometric symmetry and thus a unique vibrational behavior which is independent from the location of the externally added nanoparticle. The study is conducted by the use of a computationally effective numerical scheme based on the adoption of appropriate three dimensional line spring elements as well as point mass elements to simulate the atomistic structure of fullerenes and interatomic interactions appearing between carbon atoms. The free vibration of C₂₀, C₆₀, C₈₀ and C₁₈₀ molecules is analyzed without and with an external nanoparticle of specific mass attached on their structure to calculate the arisen change in their natural frequencies and corresponding shape modes. A parametric study concerning the magnitude and location of the added mass is performed in order to evaluate the mass sensing ability of the fullerenes under consideration.     

Biosynthesis and characterization of silver nanoparticles using strawberry seed extract and evaluation of their antibacterial and antioxidant activities

Synthesis of nanomaterials is an emerging field due to their fascinating properties for applications in different field and green synthesis offers various advantages versus physical and chemical methods. Herein, green protocol has been adopted for the synthesis of silver nanoparticles (Ag NPs) using seeds extract of strawberry. The Ag NPs were characterized using advanced techniques comprising UV/Vis, XRD, FTIR, SEM, DLS and EDX. The λ_max for the Ag NPs was recorded at 405 nm. The functional groups present in the extract and involved in Ag ions reduction were determined using FTIR analysis. The SEM-EDX analysis confirmed the mono-dispersive nature of Ag NPs along with confirmation of elemental composition. The nanoparticles size distribution was recorded in 50-70 nm range. Bio-fabricated Ag NPs were appraised for antioxidant activity (DPPH with % inhibition 56.61 and ABTS with % inhibition 77.81) and antimicrobial activity, i.e., Escherichia coli, Salmonella typhimurium, Shigella sonnei, Halomonas halophile, Staphylococcus aureus and Bacillus subtilis. It is concluded that these synthesized NPs could probably be applied as potent antibacterial and antioxidant materials.     

Strong and Superhydrophobic Wood with Aligned Cellulose Nanofibers as a Waterproof Structural Material†

Lightweight structural materials are important for the energy efficiency of applications, particularly those in the building sector. Here, inspired by nature, we developed a strong, superhydrophobic, yet lightweight material by simple in situ growth of nano‐SiO₂ and subsequent densification of the wood substrate. In situ generation of SiO₂ nanoparticles both inside the wood channels and on the wood surfaces gives the material superhydrophobicity, with static and dynamic contact angles of 159.4^o and 3^o, respectively. Densification of the wood to remove most of the spaces among the lumen and cell walls results in a laminated, dense structure, with aligned cellulose nanofibers, which in turn contributes to a high mechanical strength up to 384.2 MPa (7‐times higher than natural wood). Such treatment enables the strong and superhydrophobic wood (SH‐Wood) to be stable and have excellent water, acid, and alkaline resistance. The high mechanical strength of SH‐Wood combined with its excellent structural stability in harsh environments, as well its low density, positions the strong and superhydrophobic wood as a promising candidate for strong, lightweight, and durable structural materials that could potentially replace steel.     

Resilient and agile engineering solutions to address societal challenges such as coronavirus pandemic

The world is witnessing tumultuous times as major economic powers including the US, UK, Russia, India, and most of Europe continue to be in a state of lockdown. The worst-hit sectors due to this lockdown are sales, production (manufacturing), transport (aerospace and automotive) and tourism. Lockdowns became necessary as a preventive measure to avoid the spread of the contagious and infectious “Coronavirus Disease 2019” (COVID-19). This newly identified disease is caused by a new strain of the virus being referred to as Severe Acute Respiratory Syndrome CoronaVirus 2 (SARS CoV-2; formerly called 2019-nCoV). We review the current medical and manufacturing response to COVID-19, including advances in instrumentation, sensing, use of lasers, fumigation chambers and development of novel tools such as lab-on-the-chip using combinatorial additive and subtractive manufacturing techniques and use of molecular modelling and molecular docking in drug and vaccine discovery. We also offer perspectives on future considerations on climate change, outsourced versus indigenous manufacturing, automation, and antimicrobial resistance. Overall, this paper attempts to identify key areas where manufacturing can be employed to address societal challenges such as COVID-19.     

Computation of Electromagnetic Properties of Molecular Ensembles

We outline a methodology for efficiently computing the electromagnetic response of molecular ensembles. The methodology is based on the link that we establish between quantum-chemical simulations and the transfer matrix (T-matrix) approach, a common tool in physics and engineering. We exemplify and analyze the accuracy of the methodology by using the time-dependent Hartree-Fock theory simulation data of a single chiral molecule to compute the T-matrix of a cross-like arrangement of four copies of the molecule, and then computing the circular dichroism of the cross. The results are in very good agreement with full quantum-mechanical calculations on the cross. Importantly, the choice of computing circular dichroism is arbitrary: Any kind of electromagnetic response of an object can be computed from its T-matrix. We also show, by means of another example, how the methodology can be used to predict experimental measurements on a molecular material of macroscopic dimensions. This is possible because, once the T-matrices of the individual components of an ensemble are known, the electromagnetic response of the ensemble can be efficiently computed. This holds for arbitrary arrangements of a large number of molecules, as well as for periodic or aperiodic molecular arrays. We identify areas of research for further improving the accuracy of the method, as well as new fundamental and technological research avenues based on the use of the T-matrices of molecules and molecular ensembles for quantifying their degrees of symmetry breaking. We provide T-matrix-based formulas for computing traditional chiro-optical properties like (oriented) circular dichroism, and also for quantifying electromagnetic duality and electromagnetic chirality. The formulas are valid for light-matter interactions of arbitrarily-high multipolar orders.     

Numbers,scale and symbols: the public understanding of nanotechnology

Nanotechnology will be an increasing part of the everyday lives of most people in the world. There is a general recognition that few people understand the implications of the technology, the technology itself or even the definition of the word. This lack of understanding stems from a lack of knowledge about science in general but more specifically difficulty in grasping the size scale and symbolism of nanotechnology. A potential key to informing the general public is establishing the ability to comprehend the scale of nanotechnology. Transitioning from the macro to the nanoscale seems to require an ability to comprehend scales of one-billion. Scaling is a skill not common in most individuals and tests of their ability to extrapolate size based upon scaling a common object demonstrates that most individuals cannot scale to the extent needed to make the transition to nanoscale. Symbolism is another important vehicle to providing the general public with a basis to understand the concepts of nanotechnology. With increasing age, individuals are able to draw representations of atomic scale objects, but these tend to be iconic and the different representations not easily translated. Ball and stick models are most recognized by the public, which provides an opportunity to present not only useful symbolism but also a reference point for the atomic scale.     

Lithography potentials of UV-nanoimprint

In the past decade nanoimprint has been developed to a serious alternative for next generation lithography (NGL). In this work, the most recent developments of UV-nanoimprint Lithography (UV-NIL) with special emphasis to the work accomplished at AMO and the IHT-RWTH Aachen are reviewed and functional applications demonstrated. Further the potentials of various UV-NIL concepts are evaluated and possible interests in certain application areas are discussed.     

Materials with a desired refraction coefficient can be made by embedding small particles

A method is proposed to create materials with a desired refraction coefficient, possibly negative one. The method consists of embedding into a given material small particles. Given n₀(x), the refraction coefficient of the original material in a bounded domain , and a desired refraction coefficient n(x), one calculates the number N(x) of small particles, to be embedded in D around a point xD per unit volume of D, in order that the resulting new material has refraction coefficient n(x).