Modification of the surface state of rough substrates by two different varnishes and influence on the reflected light

Modification of the visual appearance when a rough surface is covered by a varnish is mostly attributed to the levelling of the substrate surface, which depends on the molecular weight of the varnish. The topography of varnished surfaces, however, has never been measured directly. Surfaces of varnishes applied over glass substrates of varying roughness were studied, therefore, using mechanical profilometry. Two different varnishes made with a low and a high molecular weight resin were studied. Both varnishes lower the r.m.s. roughness of the substrates and filter the high spatial frequencies. These results are amplified for the varnish containing the low molecular weight resin. The light reflected by the varnished samples is modelled from these topographical data. Its angular distribution, calculated from the probability density of slopes is presented, taking into account separately the air/varnish and the varnish/substrate interfaces. These analyses are presented in a back-scattering configuration. They show that varnishing significantly reduces the angular width of the reflected light and that this effect is magnified for the low molecular weight resin. Modelling furthermore shows that the influence of the roughness of the varnish/substrate interface is negligible in the total reflected light.     

Comparison of growth stress measurements with modelling in thin iron oxide films

High temperature oxidation of metals leads to residual stresses both in the metal and in the growing oxide. In this work, the evolution of this residual stresses is theoretically predicted in the growing oxide layers. The origin of these stresses is based on a microstructural model. Using experimental results providing from the oxidation kinetics, and an analysis proposed to describe the growth strain occurring in the thin layers, a set of equations is established allowing determining the stresses evolution with oxidation time. Then, the model is compared with experimental results obtained on both α-Fe and phosphated α-Fe, oxidised at different temperatures. Numerical data are extracted from experiments either with an asymptotic formulation or with an inverse method. These two methods give good agreement with experiments and allow extracting the model parameters.     

Mathematical modelling and analytical solution for workpiece temperature in grinding

This paper deals with modelling the workpiece temperature field produced during the grinding process. The proposed model is given in terms of a two-dimensional boundary-value problem where the interdependence among the grinding wheel, the workpiece and the coolant is described by two variable functions in the boundary condition. An explicit integral form solution is constructed using the Laplace and Fourier transforms and the Green’s function method.     

Expert systems as a tool for statistics: A review

The current state of using expert system (ES) techniques for statistics is expounded through the difficulties of defining the notion of statistical expert system (SES) and through several well-known examples. The main characteristics of statistical expertise, and particularly the important concept of strategy are emphasized. The current state of SESs is seen in the context of the global trend of the evolution of ES, i.e. within the growth of second generation expert system (SGESs). The knowledge base of these ESs represent an attempt to represent not only experts' knowledge but also the way experts acquire their expertise, thanks to the existence of an underlying model. We show through many examples how far SESs are and/or will be able to be SGESs.     

Ultrasonic evaluation of anisotropic damage in multiaxially textile-reinforced thermoplastic composites made from hybrid yarns

The basic damage and failure models of multiaxially reinforced composites with a thermoplastic matrix are presented and verified. Within the framework of continuum damage mechanics, a phenomenological model is introduced, where the damage is defined as a change in the elasticity tensor. For damage identification, a specific ultrasonic device was developed. A combination of an immersion set-up and a contact coupling device formed a system for an efficient determination of stiffness-tensor components from convenient sets of velocity measurements. Linked to a tensile machine, it allowed us to measure the anisotropic damage of the new materials group caused by tensile loading. Russian translation published in Mekhanika Kompozitnykh Materialov, Vol. 42, No. 2, pp. 221–234, March–April, 2006.     

Detecting and Diagnostic Checking Multivariate Conditional Heteroscedastic Time Series Models

Two tests for multivariate conditional heteroscedastic models are proposed. One is based on the cross-correlations of standardized squared residuals and the other is a score (Lagrange multiplier) test. The cross-correlations test can be used to detect the presence of multivariate conditional heteroscedasticity whereas the other test can be used for diagnostic checking. Simulation studies on the size and power of the test statistics are reported. The application of the tests is illustrated by an example using the S & P 500 and Sydney All Ordinary Indexes.     

Testing deviations from the inverse square law with a freely falling gravity gradiometer at balloon altitudes

Summary We discuss a null experiment to search for the fifth force at ranges around 10 km. It is proposed to use a three-axis gravity gradiometer to measure the trace of the Earth gravity tensor from a freely falling elevator dropped by a balloon. The main error sources are considered to some extent. Paper presented at the V Cosmic Physics National Conference, S. Miniato, November 27–30, 1990.     

The HITRAP project at GSI: trapping and cooling of highly-charged ions in a Penning trap

A decelerator will be installed at GSI in order to provide and study heavy nuclei without or with only few electrons at very low energies or even at rest. Highly-charged ions will be produced by stripping at relativistic energies. After electron cooling and deceleration in the Experimental Storage Ring (ESR) the ions are ejected out of the storage ring at 4 MeV/u and further decelerated in a combination of linear accelerator structures operated in reverse. Finally, they are injected into a Penning trap where the ions are cooled to 4 K by electron cooling in combination with resistive cooling. From here, the ions can be transferred in a quasi DC or in a pulsed mode to different experimental setups. This article describes the technical concepts of this project focused on the Penning trap.      

A web-based workforce management system for Sainsburys Supermarkets Ltd

Labour scheduling plays an important and critical role in Sainsburys day to day operations and profitability. The integrated workforce management solution for Sainsburys is an intelligent solution for the operational deployment of human resources, integrated business forecasting, generation and calculation of workload and staff scheduling. The workforce management technology has provided Sainsburys with a fully web-based and centralised system that produces optimised schedules for all employees satisfying the forecasted demand of work with granularity of fifteen minutes. The system is configured to respect all operational and business requirements as well as employee contractual constraints. This paper introduces the workforce management solution system designed, developed and implemented for Sainsburys. We concentrate on two modelling structures, namely the work pattern model and optimisation model, and briefly discuss the optimisation process.     

Design and Cold Tests of Asymmetric Quasioptical Resonators

This paper presents the design and test of asymmetric quasioptical resonators for gyrotron applications, where most of the diffraction output coupling comes from the smaller of two mirrors. A computer code based on scalar diffraction theory is used to calculate the resonator losses and the electric field near the mirrors. Resonators with mirror separations approaching confocal have reduced side lobes in the diffraction patterns, which should allow for better power transmission and focusing. Cold tests have been performed at 94 and 141 GHz to measure the quality factor of the asymmetric resonators as a function of mirror separation and mirror misalignment. Typical resonator parameters include 65 cm mirror separation, 1-3% output coupling and 85% of the losses from the small mirror. A half-symmetric resonator with one flat and one curved mirror has also been investigated. The calculated values of Q are in reasonably good agreement with the cold test measurements.