An efficient lasing action from pyrromethene 556 dye-doped organically modified silicates

Organically modified solid-state silicates (ORMOSILS) doped with a new laser dye 1,3,5,7,8-pentamethylpyrromethene-2,6-disulfonate-BF₂ complex (pyrromethene 556) have been synthesized by a sol-gel method and the compositional effects on pore characteristics, fluorescence and lasing properties have been investigated. It is found that the use of dimethylsulfoxide and γ-glycidoxypropyltrimethoxysilane could greatly change the structure properties of sol-gel derived ORMOSILS cage, and thus the fluorescence and lasing properties of the materials could improve significantly. A successful laser oscillation from this dye-doped ORMOSILS sample has been achieved upon pumping with a Q-switched frequency-doubled Nd:YAG laser at 532 nm. A slope efficiency of 54% with a useful lifetime greater than 10,000 shots has been demonstrated at a pump repetition rate of 1 Hz and a pump intensity of 1 J/cm² by using the new ORMOSILS cage on our newly designed laser system. Our results have shown that it is possible to obtain a high-efficiency with a long-lifetime for a compact new laser device by low cost dye-doped solid-state ORMOSILS.     

新型分子筛Ti-MMM-1的合成及其催化性能的研究

通过控制TEOS的水解，在不同时间添加与MCM-41和MFI相应的有机模板剂合成出了一种新型分子筛，Ti-MMM-1，采用XRD、FT-IR和低温N2吸附对其进行表征，并用H2O2氧化环己烷和环己醇对其催化活性进行评价．结果表明，Ti-MMM-1是一种具有MCM-41和MFI结构的两相混合的微孔／介孔材料，IR分析表明钛原子已进入分子筛骨架，并在环己烷和环己醇的氧化中表现出较好的催化活性和较高的选择性．     

Hydrogen bonded layer-by-layer assembly of poly(2-vinylpyridine) and poly(acrylic acid): Influence of molecular weight on the formation of microporous film by post-base treatment

This article describes the buildup of hydrogen bonded multilayer film of poly(2-vinylpyridine) (P2VP) and poly(acrylic acid) (PAA), and the influence of polymer molecular weight on the formation of microporous film by post-base treatment. The formation of a microporous film involved a two-step mechanism: the release of PAA from P2VP/PAA multilayer, and the reorganization of the remaining P2VP on the substrate. Fourier transform infrared spectroscopy (FT-IR) indicated that the release of PAA from hydrogen bonded multilayer was a rapid process, which was almost independent of the molecular weight of PAA. Furthermore, the molecular weight of P2VP had a great effect on micropore formation by immersing the P2VP/PAA multilayer in basic solution. The rate of micropore formation increased with increasing molecular weight. We anticipate that a comparative study on P2VP/PAA films containing high or low molecular weight polymer provides a way to control the surface morphology, and will be helpful and constructive for the forthcoming discussion about the formation of the microporous film.     

聚丙烯微孔膜基渐变聚合物的制备,结构与性能的研究

以聚丙烯微孔膜为基材，通过扩散控制原位共聚合的方法在人填充了组成沿膜的厚度方向逐渐改变的无规共聚物，Ｘ－光电子能谱（ＸＰＳ）、全反射红外光谱（ＡＴＲ）以及动态粘弹谱的分析结果。说明所制备得到的合膜具有明显的渐变聚合物性质。     

A simple isotherm equation for describing gas adsorption on heterogeneous microporous solids

A simple isotherm equation for describing gas adsorption on solids showing heterogeneity of microporous structure is proposed. It is shown that this equation gives a good representation of the experimental data of argon, nitrogen and benzene adsorption on different types of activated carbons. Its parameters may be used to characterize heterogeneity of microporous structure of the solids.

---

Eine einfache Isotherme zur Beschreibung der Gas-Adsorption an heterogenen mikroporösen Feststoffen

Zusammenfassung Es wird eine einfache Isotherme zur Beschreibung der Gasadsorption an Feststoffen mit heterogener mikroporöser Struktur vorgeschlagen. Es wird gezeigt, daß diese Gleichung die experimentellen Daten für die Adsorption von Argon, Stickstoff und Benzol an verschiedenen Typen von Aktivkohle gut beschreibt. Die Parameter der Isotherme können zur Charakterisierung der Heterogenität der mikroporösen Struktur von Festkörpern herangezogen werden.

     

Microporous, fast response cellulose ether hydrogel prepared by freeze-drying

A simple and effective method of preparing fast-response gels is developed. The freeze-drying and subsequent rehydration of thermosensitive gels alters the microstructural properties of the gels in a way that leads to rapid shrinking rates. Microporous hydroxypropyl cellulose (HPC) gels were created by this method to investigate the influence of the process on the swelling and shrinking kinetics of the gels in response to temperature changes. Micropores of different size ranges were produced by freezing gels with different amounts of water at −20 °C. Water content was the key factor to control the microporosity and the shrinking rates of gels. After the freezing treatment, an effective diffusion coefficient for shrinking could be determined by fitting Fick's law to the data (5.2 × 10⁻⁴ cm²/s). This was an increase of two orders of magnitude over that of the untreated, non-porous gel (6.0 × 10⁻⁶ cm²/s). The magnitude of the shrinking coefficient indicates that the shrinking rate of the microporous gel is probably limited by the convective flow, as unsteady flow through porous media follows the same differential equation as Fick's law, but with much greater transport coefficients, as observed here. Physically, the shrinking rate may be determined by the level of interconnected-cells in a microporous structure present at the beginning of shrinking process because the convection through the interconnected-cells is estimated to be much slower than the polymer network diffusion rate of the struts of micropores (0.1–3.0 μm) as well as heat transfer.     

微孔型固体偏氟乙烯-六氟丙烯共聚物电解质

将固体聚合物电解质 (Ｓｏｌｉｄｐｏｌｙｍｅｒｅｌｅｃｔｒｏｌｙｔｅ)用于锂离子电池的研究已经有 3 0年的历史[1] ,从物理角度来看 ,研究过干态型 (ＤｒｙＳＰＥ)、凝胶型 (ＧｅｌｌｅｄＳＰＥ)和微孔型固体聚合物电解质 (ＰｏｒｏｕｓＳＰＥ)三大类型[2 ] ;从化学角度来看 ,研究过含氧、含氮、和含氟的等聚合物[1～ 6 ] .微孔型固体含氟聚合物电解质是近 1 0年来才开始研究并受到产业界很大关注的一种ＳＰＥ .固体聚合物电解质的应用可以解决液体电解质锂离子电池的漏液问题 ,并提高其安全性 ,还可以通过使用塑料包装来减小电池的重量…     

氢键构筑的新颖微孔配位聚合物[Co2(Hisor)2·(4,4′-bpy)2(H2O)2]·4,4′-bpy的合成与结构

A novel microporous coordination polymer [Co2(Hisor)2(4,4′-bpy)2(H2O)2]·4,4′-bpy was synthesized by hydrothermal reaction and characterized by single crystal X-ray diffraction, elemental analysis and IR spectrum. The crystal belongs to the monoclinic system and space group is P2/n with a=1.040 6(3) nm, b=1.138 8(4) nm, c=1.854 7(6) nm, β=102.991(6)°, V= 2.141 6(12) nm3, Z=2, Dc=1.443 Mg/m3, Mr=930.62, μ=0.842 mm-1, F(000)=952, GOF= 1.072, R=0.065 4, wR=0.146 8[I>2σ(I)]. There are two crystallographically independent Co(Ⅱ) ions in the title complex. The Hisor2- and 4,4′-bpy link the metal ions into 2D grids with dimension of 0.522 3 nm×1.138 8 nm. There are O—H…O and N—H…O hydrogen bonds in the complex resulting in the formation of 3D network with 1D channels, in which are free 4,4′-bpy molecules.     

Pore size distributions in microporous membranes. A critical analysis of the bubble point extended method

An extended bubble point method has been used to examine the porous morphology of several track-etched microporous polycarbonate membranes with nominal pore sizes ranging from 0.1 to 5.0 μm. The technique has been carefully analyzed and corrected to take into account the diverse non-ideal factors in flow along with the prevalence of Knudsen flow over the Hagen-Poiseuille one in the smaller pores.     

A coupled electron diffraction and rigid unit mode (RUM) study of the crystal chemistry of some zeotypic AlPO4 compounds

Electron diffraction and lattice dynamical calculations are used to investigate the unit cells, space group symmetries and inherent displacive flexibility of the room-temperature average structures of AlPO₄-8, AlPO₄-16 and AlPO₄-tridymite. The zero-frequency rigid unit modes (RUMs) of the idealized high-symmetry polymorphs thereof are also investigated along with their relationship to the lower-temperature polymorphism of these zeotypic aluminophosphates. The clear presence of satellite reflections in addition to the Bragg reflections (G) of the underlying Cmc2₁ parent structure in the case of AlPO₄-8 shows that the true unit cell of the room-temperature polymorph has a doubled c-axis due to a condensed RUM mode. Structured diffuse scattering is also observed which can be related to the thermal excitation of RUM modes. In the case of AlPO₄-tridymite, a complex F1 triclinic polymorph is observed and related to soft RUM modes while, in the case of AlPO₄-16, a soft q=0 RUM mode is shown to be responsible for an observed phase transition in the case of the all SiO₂ analogue of AlPO₄-16. A large number of additional zero-frequency RUM modes also exist in the case of AlPO₄-16.