A continuum model for intermittent deformation of single crystal micropillars

Strain bursts are often observed during compression tests of single crystal micropillars. In this work, we formulate a new continuum model that accounts for the strain bursts within the framework of crystal plasticity. The strain bursts are separated from the loading stage (nearly elastic loading) by introducing a dimensionless constant in the continuum model, and are detected by load serrations. The boundary conditions in the context of micropillar compression are studied and they are shown to be changing and unpredictable as plastic deformation proceeds. To evaluate the validity of our model, finite element simulations of the uniaxial compression tests on nickel micropillars are performed. Our simulations produce clearly visible strain bursts during the plastic flow and the produced intermittent flows are comparable with the experimental observations. For the bulk crystal, a series of strain bursts is identified in the course of plastic flow, despite an apparently smooth stress–strain response. We also show that the intermittent flow is intensified in the micrometer-scale due to both increasing numbers of the successive strain bursts and increasing amplitude of the strain burst, when the specimen size decreases. Finally, we show that the occurrences of the strain bursts are always associated with negative values of the second-order work.     

ZnO based planar and micropillar resonators

In this paper we report on planar and microscopic cylindrical resonators with ZnO as the cavity and active medium surrounded with ZrO₂/MgO Bragg reflectors. We have observed resonator behaviour of these structures and, for the planar resonators, exciton–polariton coupling with a mode splitting of about 50 meV.     

Hydrodynamic chromatography of polystyrene microparticles in micropillar array columns

We report on the possibility to perform HDC in micropillar array columns and the potential advantages of such a system. The HDC performance of a pillar array column with pillar diameter = 5 μm and an interpillar distance of 2.5 μm has been characterized using both a low MW tracer (FITC) and differently sized polystyrene bead samples (100, 200 and 500 nm). The reduced plate height curves that were obtained for the different investigated markers all overlapped very well, and attained a minimum value of about h_min = 0.3 (reduction based on the pillar diameter), corresponding to 1.6 μm in absolute value and giving good prospects for high efficiency separations. The obtained reduced retention time values were in fair agreement with that predicted by the Di Marzio and Guttman model for a flow between flat plates, using the minimal interpillar distance as characteristic interplate distance.     

Micropillar‐based microfluidic device to regulate neurite networks of uniform‐sized neurospheres

The inability of neurons to undergo mitosis renders damage to the central or peripheral nervous system. Neural stem cell therapy could provide a path for treating the neurodegenerative diseases. However, reliable and simple tools for the developing and testing neural stem cell therapy are still required. Here, we show the development of a micropillar‐based microfluidic device to trap the uniform‐sized neurospheres. The neurospheres trapped within micropillar arrays were largely differentiated into neuronal cells, and their neurite networks were observed in the microfluidic device. Compared to conventional cultures on glass slides, the neurite networks generated with this method have a higher reproducibility. Furthermore, we demonstrated the effect of thapsigargin on the neurite networks in the microfluidic device, demonstrating that neural networks exposed to thapsigargin were largely diminished and disconnected from each other. Therefore, this micropillar‐based microfluidic device could be a potential tool for screening of neurotoxins.     

A stochastic model for the temporal aspects of flow intermittency in micropillar compression

Systematic experimental investigations have demonstrated that the plastic deformation of micropillar proceeds through a sequence of intermittent bursts, the sizes of which follow power-law statistics. In this study, a stochastic model based on the power-law distribution of burst size is formulated in the framework of crystal plasticity in order to investigate the temporal aspects of flow intermittency in micropillar compression. A Monte Carlo simulation scheme is developed to determine the burst size when a burst activity is captured. This burst size is considered as the displacement boundary condition of burst deformation. Three-dimensional finite element analysis of the model is performed and its predictions are validated by comparison with results from both micro-compression experiments and simulation tests of bulk crystals using the classic crystal plasticity finite element method (CPFEM). The model provides a reasonable prediction of stress–strain responses both at the macroscopic and microscopic scales. Finally, the capability of this model is shown with applications to the intermittent plastic deformation in micropillar compressions, in particular for their burst time durations and burst velocities. The results from such stochastic finite element analysis are shown to be consistent with earlier experimental findings and results of mean-field theory.     

Identification of polymer matrix yield stress in the wood cell wall based on micropillar compression and micromechanical modelling

Based on a combination of micropillar compression experiments and modelling of the secondary cell wall (cw) using continuum micromechanics, the shear yield stress of the polymer matrix is identified for both normal and compression wood of Norway spruce. It is shown that the model is able to capture the differences in mechanical properties between the two tissues based on the knowledge of composition of the samples, microfibril angle, as well as phase properties on the nanometer scale. By testing an isolated piece of the cell wall with a homogeneous and uniaxial stress field on the micrometer scale and using the micromechanical model to determine average stress fields on the nanometer scale, it is possible to identify the shear yield stress of the polymer matrix in wood, which was found to be in the range of 14.9–17.5 MPa for normal and compression wood. It was shown that this corresponds to a stress in the lignin phase of approx. 17 MPa. This combined study thus demonstrates a new approach for validating multiscale models predicting yield properties with uniaxial experiments at the microscale and measuring phase properties of inhomogeneous materials by a combination of modelling and experimental approaches.     

用于细胞三维培养的集成微柱阵列的微流控芯片设计与验证

设计并验证了一种用于细胞三维培养的集成微柱阵列的微流控芯片.芯片由一片聚二甲基硅氧烷(PDMS)沟道片和一片玻璃盖片组成, 在PDMS沟道片上集成了一个由两排微柱阵列围成的细胞培养室和两条用于输送培养基的侧沟道.微柱间距直接影响了芯片的使用性能, 是整个芯片设计的关键.基于数值模拟和实验验证, 本研究对微柱间距进行了优化设计.优化后的微流控芯片可以很好地实现细胞与细胞外基质模拟材料混合液的稳定注入、培养基中营养物质向培养室内的快速扩散和细胞代谢物的及时排出.在芯片上进行了神经干细胞的三维培养, 证明了芯片上构建的细胞体外微环境的稳定性.     

Isoelectric focusing in an ordered micropillar array

An original micropillar array dedicated to electrophoretic separations has been developed. It consists of a rectangular zone of PDMS micropillars protruding on a PDMS block. This area has been chosen to mimic a diluted gel structure and remains uncovered to keep the ability to perform an immunoblot after the protein separation for further applications in the field of allergy diagnosis. The micropillar array geometry has been optimized by evaluating the influence of pillar shape, pillar size and interpillar distance on evaporation and IEF separation. The separation conditions namely electrolyte composition, temperature and sample loading have been studied. Finally a protein mixture with pI ranging from 4.7 to 10.6 has been successfully separated within this microdevice by IEF without decreasing the resolving power obtained with conventional minigel. The micropillar array developed for electrophoretic separations leads to much shorter analysis times and can be reused several times while gels are disposable.