Sound absorption properties of polyurethane foams derived from crude glycerol and liquefied coffee grounds polyol

The main objective of this study was to evaluate the sound absorption properties of rigid polyurethane foams (PUFs) produced from crude glycerol (CG) and/or liquefied coffee grounds derived polyol (POL). The lignin content of POL proved to have a major influence on the structure and mechanical properties of the foams. Indeed, the POL content increased the cell size of the foams and their stiffness, which subsequently influenced the sound absorption coefficients. The POL derived foam has slightly higher sound absorption coefficient values at lower frequencies, while the CG foam has higher sound absorption coefficient values at higher frequencies. In turn, the foam prepared using a 50/50 mixture of polyols presents slightly higher sound absorption coefficient values in the medium frequencies range due to a balance between the cell structure and the mechanical properties. The results obtained seem to suggest that the mechanisms involved in sound wave absorption depend on the formulation used to prepare the foams. Additionally higher POL contents improved the thermal stability of PUFs as well as their mechanical properties. From this work the suitability of CG and/or POL derived PUFs as sound absorbing materials has been proven.     

功能化离子液体液化木粉及其酚醛复合材料

合成了氯代1-(2-羟乙基)-3-甲基咪唑离子液体[He MIM]Cl、溴代1-乙胺基-3-甲基咪唑离子液体[Ae MIM]Br和氯代1-羧乙基-3-甲基咪唑离子液体[Ce MIM]Cl 3种功能化咪唑离子液体,并分别进行了红外与氢核磁结构表征.然后用3种离子液体液化木粉,液化3 h后向体系直接加入苯酚、甲醛和氢氧化钠,制备酚醛复合材料,并采用FTIR、XRD、DSC和SEM对酚醛复合材料进行结构、性能与形貌测试,研究离子液体种类对木粉液化率及酚醛树脂性能的影响.结果表明,离子液体及其液化木粉产物制备的酚醛复合材料性能得到明显改善.[Ce MIM]Cl液化效果最好,90℃液化率高达24.6%,当[Ce MIM]Cl与木粉质量比为10∶1时,制备的酚醛复合材料的游离醛释放量由原来的3.64%降低到0.92%.离子液体[Ae MIM]Br能将酚醛复合材料的冲击强度由原来的0.93 k J/m2提高到6.96 k J/m2,而[Ae MIM]Br及其液化的木粉产物制备的酚醛复合材料拉伸强度从原来的3.28 MPa提高到9.70 MPa.     

1H NMR和GC-MS法分析表征煤液化油

采用经典柱色谱法对煤液化循环油和“加氢”后的循环油进行族组成分离,将其分离成饱和烃、芳香烃和极性物3个组分,并用核磁共振波谱仪对各个组分进行定性分析,同时用气质联用分析方法初步确定了饱和烃和芳香烃两个馏分的主要物质组成。结果表明:循环油饱和烃部分主要由C12~C27直链烷烃组成,芳香烃部分主要组成是烷基取代的氢化单环芳烃及少量的多环芳烃。而循环油经420℃“加氢”后饱和烃部分除了含C12~C27的直链烷烃,还有一些直链烷烃的异构体和环烷烃,芳香烃部分主要是双环、三环、四环芳烃,单环芳烃则完全消失。     

常压下玉米秸秆液化工艺的优化及其生物油分析

随着化石能源的日益短缺，可再生木质生物质资源的利用越来越受到重视，常压液化技术是生物质资源高效利用的主要方式之一。利用单因素方法，探讨液化温度、复配液化剂二甘醇（DEG）与1,2-丙二醇（PG）的混合比、液固比、催化剂磷酸的用量、反应时间等因素对玉米秸秆液化得率的影响，以便优化其液化工艺；然后采用热重分析仪（TGA）、气相色谱-质谱技术（GC-MS）和核磁共振（NMR）技术对此优化条件下所得生物油的挥发降解特性和主要组成成分进行了检测探讨。分析表明，玉米秸秆液化时优化工艺参数为：液化温度170 ℃，液化剂DEG与PG混合比1∶2，液固比5∶1，H₃PO₄用量10%，反应时间45 min；此时玉米秸秆液化得率高至99.50%。TGA结果表明，此条件下所得生物油含有80%以上碳数小于25的化合物，热解后最终残炭量约为15%。GC-MS表明，可以检测出此生物油中含有的39种有机物，其中，醇类有机物的含量最多，酚类有机物的含量次之，它们相对含量依次是70.70%和25.63%，其还含有一定量的有机酸（2.80%）、醚类（0.64%）、酯类（0.10%）和酮类（0.13%）等有机物；其组分十分复杂，高含氧量，稳定性较差。1H-和13C-NMR分析表明，不同化学位移δ与生物油中不同类型的质子和碳原子相对应，明确生物油中不同类型H和C的分布，有利于对其分子结构进行深入探讨。这些研究为非木材生物质高效液化条件的选择及液化产物制备化学品和生物燃油给予理论基础与应用支持，促进了生物质资源的有效转化利用及其生物质基产品的开发。     

Modeling liquefaction of water saturated granular material under undrained cyclic shearing

The tendency of particles in a water-saturated granular mass to re-arrange into a denser state during cyclic shearing under pressure results in an increase in pore water pressure. The increase in the pore water pressure causes a reduction in the inner particle contact forces, and in turn easier re-arrangement of the particles. Eventually, the material loses its shear strength, partially or almost completely. In this paper, a general three-dimensional continuum mechanics model is presented for the deformation of granular materials. A physically based model is also presented for characterization of liquefaction of the water saturated granular material under undrained cyclic shearing. The model incorporates the fabric of the granular mass, which develops as the frictional granular mass is deformed in shear. It includes the coupling between shearing and excess pore water pressure. The model parameters are estimated, based on the results of cyclic shearing experiments on large hollow cylindrical samples of silica sand. Basically, the calculation results utilizing this model can embody liquefaction phenomena of the water saturated granular material under undrained cyclic shearing.     

几种国外新型的小型天然气液化流程分析

液化流程的设计是小型天然气液化装置开发研制的关键。文中介绍了国外天然气液化装置研究机构和设计制造公司所提出的几种小型天然气液化流程,阐述和分析了其液化方法和特点,指出国外小型天然气液化流程制冷主要采用了天然气膨胀循环,制冷剂膨胀循环和混合制冷剂循环;其液化装置采取了模块化定制成撬块的思路,并且考虑了环保性。认为膨胀制冷方法在小型天然气液化流程中将得到广泛的应用。     

Kinetic study for liquefaction of tar in sub- and supercritical water

Liquefaction of tar from oil distillation was studied under sub- and supercritical water conditions using a batch reactor at 623 and 673 K and 25-40 MPa. The reaction scheme for tar liquefaction was determined as follows: the liquefaction process of tar occurs first and then intermediate chemical compounds are transformed into lighter molecular weight species. The effects of pressure and treatment time were combined into a single severity parameter that was used to monitor the conversion of tar. The main products from the liquefaction of tar were phenol (3.44 wt%), biphenyl (2.23 wt%), diphenylether (13.70 wt%) and diphenylmethane (1.30 wt%), respectively. Liquefaction of tar clearly increased with increasing water density at the same temperature reaction. It indicates that hydrolysis was important in the cleavage of the macromolecular structure of tar under sub- and supercritical conditions. Based on the results, this method could become an efficient method for tar liquefaction, producing high yields of valuable chemical intermediates.     

玉米秸秆常压催化液化及产物分析

以玉米秸秆粉末为原料,浓磷酸为反应催化剂,选取多种有机溶剂为液化剂,170 ℃的条件下,在高压反应釜中制备秸秆生物质油。考察了三乙酸甘油酯复配碳酸乙烯酯、甘油复配碳酸乙烯酯以及聚乙二醇复配碳酸乙烯酯(均为6∶1ω/ω)三种不同的混合液化剂对液化得率和生物质油产品性能的影响。采用气质联用仪(GC-MS)分析秸秆生物质油的化学组成;傅里叶红外光谱仪(FTIR)分析原料和液化残渣的主要官能团。实验结果表明聚乙二醇与碳酸乙烯酯混合溶剂液化时,秸秆生物质油得率为97.84%,三乙酸甘油酯与碳酸乙烯酯混合液化时得率为80.20%,甘油与碳酸乙烯酯混合液化时得率为36.97%。FTIR分析结果表明,以聚乙二醇与碳酸乙烯酯混合溶剂为液化剂,秸秆中纤维素、半纤维素和木素的特征官能团几乎全部消失,液化效果最好。GC-MS分析结果表明,生物质油的成分复杂,主要包括有机酸和酮类、醇和醚类、芳香类、糖类和酯类等化合物。     

木质素资源利用的研究进展

木质素作为一种大量存在的可再生资源,具有巨大的应用潜力。近年来,木质素资源的高效利用问题引起了人们的广泛关注。本文综述了近几年来国内外木质素资源利用的研究状况,简要介绍了木质素利用的两种方式:大分子形式利用以及液化降解利用。重点介绍了木质素液化降解制备生物油及酚类化合物的国内外研究现状,并对液化降解机理进行了阐述。最后,总结了当前木质素资源利用存在的问题,提出了未来木质素利用的研究方向,展望了木质素的发展前景。     

混合制冷剂循环膨胀机内复叠天然气液化流程设计

提出一种混合制冷剂循环膨胀机内复叠天然气液化流程(Hybrid JT-exp)。采用自主开发的流程模拟程序,分别对C3/MRC流程、AP-XTM流程和Hybrid JT-exp流程进行了模拟,并以单位能耗为指标对三种流程进行了优化。优化结果发现,Hybrid JT-exp流程综合特性曲线匹配效果最好,其流程总功耗和单位能耗与AP-XTM流程相当;与C3/MRC流程相比,其流程总功耗降低约9.5%,单位能耗降低约9.6%。Hybrid JT-exp流程可作为AP-XTM流程的一种替代技术方案。